Uploaded July 2025 | Updated September 2026, 2 weeks ago
🎥 Welcome to the Fully Defined LIVE
Join me as I tackle @TooTallToby 's Speed Modelling Practice Models in SolidWorks
Whether you're a SolidWorks beginner or a design pro, you’ll pick up tips, shortcuts, and insights as I take you through my process in real time. Check the timestamps for model names and to find the practice or speed runs for each!
🧱 Today’s Focus: Tier 4 and Tier 5 Models
📐 CAD Software: SolidWorks 2023
💬 Got questions as we go? Drop them in the chat—I’ll answer as many as I can during the stream! Or join the Discord: discord.gg/MW4xY2md
🔔 Don’t forget to subscribe to catch future streams and edited tutorials.
📺 Missed part of the live session? The full recording will be available here after the stream ends. The series of lessons will be edited and launched at a later date.
🚨 NEW IN 2025 🚨
SolidWorks for Designers: Foundations to CSWA
7 Hour Guided Course - Hosted by me, on Udemy
udemy.com/course/solidworks-for-designers-foundations-to-cswa/?referralCode=72203B375E1FB455DFBA
📝 References
🔽 TOO TALL TOBY'S PRACTICE MODELS 🔽
Go to tootalltoby.com and signup for your FREE account today
🕰️ Timestamps
00:00 Starting up
05:35 24-08-04 - LINKER - Tier 2 - Practice
07:20 24-08-04 - LINKER - Tier 2 - Speed Run
11:15 24-08-06 - ODD WRENCH - Tier 4 - Practice
25:30 24-08-06 - ODD WRENCH - Tier 4 - Speed Run
32:40 24-08-07 - V FORK - Tier 5 - Practice
52:30 24-08-07 - V FORK - Tier 5 - Speed Run
58:50 24-10-06 - CAP STOP - Tier 3 - Practice
01:07:35 24-10-06 - CAP STOP - Tier 3 - Speed Run
01:10:45 24-11-02 - TIE PLATE - Tier 3 - Practice
01:19:50 24-11-02 - TIE PLATE - Tier 3 - Speed Run
01:24:00 24-11-01 - MOUNT - Tier 4 - Practice
01:32:15 24-11-01 - MOUNT - Tier 4 - Speed Run
01:36:30 24-11-08 - CORNER ALIGNMENT BRACKET - Tier 6 - Practice
#TooTallToby, #CAD, #tutorial, #practice, #SolidWorks, #2Dto3D
🎥 Welcome to the Fully Defined LIVE
Join me as I tackle @TooTallToby 's Speed Modelling Practice Models in SolidWorks
Whether you're a SolidWorks beginner or a design pro, you’ll pick up tips, shortcuts, and insights as I take you through my process in real time. Check the timestamps for model names and to find the practice or speed runs for each!
🧱 Today’s Focus: Tier 4 and Tier 5 Models
📐 CAD Software: SolidWorks 2023
💬 Got questions as we go? Drop them in the chat—I’ll answer as many as I can during the stream! Or join the Discord: discord.gg/MW4xY2md
🔔 Don’t forget to subscribe to catch future streams and edited tutorials.
📺 Missed part of the live session? The full recording will be available here after the stream ends. The series of lessons will be edited and launched at a later date.
🚨 NEW IN 2025 🚨
SolidWorks for Designers: Foundations to CSWA
7 Hour Guided Course - Hosted by me, on Udemy
udemy.com/course/solidworks-for-designers-foundations-to-cswa/?referralCode=72203B375E1FB455DFBA
📝 References
🔽 TOO TALL TOBY'S PRACTICE MODELS 🔽
Go to tootalltoby.com and signup for your FREE account today
🕰️ Timestamps
00:00 Starting up
05:35 24-08-04 - LINKER - Tier 2 - Practice
07:20 24-08-04 - LINKER - Tier 2 - Speed Run
11:15 24-08-06 - ODD WRENCH - Tier 4 - Practice
25:30 24-08-06 - ODD WRENCH - Tier 4 - Speed Run
32:40 24-08-07 - V FORK - Tier 5 - Practice
52:30 24-08-07 - V FORK - Tier 5 - Speed Run
58:50 24-10-06 - CAP STOP - Tier 3 - Practice
01:07:35 24-10-06 - CAP STOP - Tier 3 - Speed Run
01:10:45 24-11-02 - TIE PLATE - Tier 3 - Practice
01:19:50 24-11-02 - TIE PLATE - Tier 3 - Speed Run
01:24:00 24-11-01 - MOUNT - Tier 4 - Practice
01:32:15 24-11-01 - MOUNT - Tier 4 - Speed Run
01:36:30 24-11-08 - CORNER ALIGNMENT BRACKET - Tier 6 - Practice
#TooTallToby, #CAD, #tutorial, #practice, #SolidWorks, #2Dto3D
