Uploaded April 2014 | Updated September 2026, 2 weeks ago
Draining and refilling oil and changing oil filter on a Ford Focus Mk I (1998–2004)
You will need:
* Jack & axle stands, ramps, or some other safe way of getting under the car. Do not use the vehicle's spare wheel jack.
* Oil, preferred viscosity is 5w30 for most environments. The Ford specification is semi-synth, you can use full synthetic if you wish. Amazon links:
US: amzn.to/2m6ouqf | UK: amzn.to/2ms6iLb
* Replacement filter of the correct size. The Mahle product used in the video is their model OC 606, other brands are fine too. Amazon links:
US: amzn.to/2nlnfoh | UK: amzn.to/2n5PITc
* Metric socket wrench set, 13 or 15 mm socket head.
* [Possible] Oil filter wrench. You should usually be able to undo the filter by hand. Try Amazon US: amzn.to/2YJPQK0 | UK: amzn.to/2xIOnbB
* Oil tray to drain old oil.
* Container in which to dispose of old oil.
* Funnel.
Using the Amazon links above helps support my channel and is appreciated!
Draining and refilling oil and changing oil filter on a Ford Focus Mk I (1998–2004)
You will need:
* Jack & axle stands, ramps, or some other safe way of getting under the car. Do not use the vehicle's spare wheel jack.
* Oil, preferred viscosity is 5w30 for most environments. The Ford specification is semi-synth, you can use full synthetic if you wish. Amazon links:
US: amzn.to/2m6ouqf | UK: amzn.to/2ms6iLb
* Replacement filter of the correct size. The Mahle product used in the video is their model OC 606, other brands are fine too. Amazon links:
US: amzn.to/2nlnfoh | UK: amzn.to/2n5PITc
* Metric socket wrench set, 13 or 15 mm socket head.
* [Possible] Oil filter wrench. You should usually be able to undo the filter by hand. Try Amazon US: amzn.to/2YJPQK0 | UK: amzn.to/2xIOnbB
* Oil tray to drain old oil.
* Container in which to dispose of old oil.
* Funnel.
Using the Amazon links above helps support my channel and is appreciated!
![Simple how-to: Change headlight bulbs, Mazda 2 [Demio]](https://i.ytimg.com/vi/rLrnMo8EdwY/mqdefault.jpg "Simple how-to: Change headlight bulbs, Mazda 2 [Demio]
Easy DIY how to: replacing headlight bulbs on a Mazda 2 (AKA Demio) (2nd generation DY) 2002-2007. This is an easy job with simple access.
This car uses H4 bulbs which combine low and high beams into the one bulb on each side.
You will need:
* New bulbs as required: 2 x H4 / 9003 (replace in pairs) - Amazon US: http://amzn.to/2aFFek1 | UK: http://amzn.to/2crDpbt
* Latex gloves (ideally)
* Flashlight.
(Using the above Amazon links will help support my channel and is appreciated!)")
