Uploaded January 2018 | Updated September 2026, 2 weeks ago
Accessing the 3rd brake light and its bulbs on a hatchback Mondeo, a consideration of LED retrofit bulbs or upgrading to an LED unit, and a brief look at where water in the brake light cover and on the rear windscreen might be coming from.
You will need:
- Philips head screwdriver
- Replacement bulbs as required, 501 W5W incandescent.
Amazon links ~ US: amzn.to/2E8K1t4 | UK: amzn.to/2nbIjPC
Using the above links helps support my channel and is appreciated!
Accessing the 3rd brake light and its bulbs on a hatchback Mondeo, a consideration of LED retrofit bulbs or upgrading to an LED unit, and a brief look at where water in the brake light cover and on the rear windscreen might be coming from.
You will need:
- Philips head screwdriver
- Replacement bulbs as required, 501 W5W incandescent.
Amazon links ~ US: amzn.to/2E8K1t4 | UK: amzn.to/2nbIjPC
Using the above links helps support my channel and is appreciated!
![Simple how-to: Change headlight bulbs, Mazda 2 [Demio]](https://i.ytimg.com/vi/rLrnMo8EdwY/mqdefault.jpg "Simple how-to: Change headlight bulbs, Mazda 2 [Demio]
Easy DIY how to: replacing headlight bulbs on a Mazda 2 (AKA Demio) (2nd generation DY) 2002-2007. This is an easy job with simple access.
This car uses H4 bulbs which combine low and high beams into the one bulb on each side.
You will need:
* New bulbs as required: 2 x H4 / 9003 (replace in pairs) - Amazon US: http://amzn.to/2aFFek1 | UK: http://amzn.to/2crDpbt
* Latex gloves (ideally)
* Flashlight.
(Using the above Amazon links will help support my channel and is appreciated!)")
