Uploaded September 2026 | Updated November 2026, 2 hours ago
At the Huntsville Hamfest 2026, I sat down with the folks at TN07 to talk about their Triple-Fit Equipment Clamp, a simple but clever mounting solution that fits three of the most common mast diameters used in ham radio and off-grid setups: 1 inch, 1.5 inch, and 2 inch.
I've been running this clamp on my mast to support my Elecrow M6 Meshcore repeater, and it's held up great in the field. No tools required to install it, and you can adjust it quickly on site if you need to reposition your gear.
In this interview, TN07 walks through how the clamp was designed, why they built it to fit multiple mast sizes instead of a single diameter, and what other equipment people are mounting with it, from antennas and cameras to sensors and lighting. If you're running a Meshcore or Meshtastic node, a solar panel, or any other mission equipment on a portable mast, this is a mount worth having in your kit.
The Triple-Fit Equipment Clamp is priced at $24.95 for a single clamp or $40 for a two pack, and pairs well with TN07's 32 foot portable antenna mast if you're building out a full field deployable setup.
This video covers:
• What the Triple-Fit Equipment Clamp is and how it works
• Why it fits three different mast diameters with one design
• How I'm using it to mount my Elecrow M6 Meshcore repeater
• Direct interview with TN07 at Huntsville Hamfest 2026
• Other use cases: antennas, cameras, sensors, and mission equipment
🔹My Favorite Gear - amazon.com/shop/km4ack
🔹Links mentioned in the video
Save 10% with code KM4ACK10
tn07.com/triple-fit-equipment-clamp
🔹Weekly Newsletter - https://mailchi.mp/40da1fe472e3/km4acknewsletter
🔹Follow Me
Twitter @km4ack
🔹Cool Ham Gear - km4ack.com
🔹Support the channel through Patreon - patreon.com/km4ack
🔹🔹🔹🔹🔹
As an Amazon Associate I earn from qualifying purchases
At the Huntsville Hamfest 2026, I sat down with the folks at TN07 to talk about their Triple-Fit Equipment Clamp, a simple but clever mounting solution that fits three of the most common mast diameters used in ham radio and off-grid setups: 1 inch, 1.5 inch, and 2 inch.
I've been running this clamp on my mast to support my Elecrow M6 Meshcore repeater, and it's held up great in the field. No tools required to install it, and you can adjust it quickly on site if you need to reposition your gear.
In this interview, TN07 walks through how the clamp was designed, why they built it to fit multiple mast sizes instead of a single diameter, and what other equipment people are mounting with it, from antennas and cameras to sensors and lighting. If you're running a Meshcore or Meshtastic node, a solar panel, or any other mission equipment on a portable mast, this is a mount worth having in your kit.
The Triple-Fit Equipment Clamp is priced at $24.95 for a single clamp or $40 for a two pack, and pairs well with TN07's 32 foot portable antenna mast if you're building out a full field deployable setup.
This video covers:
• What the Triple-Fit Equipment Clamp is and how it works
• Why it fits three different mast diameters with one design
• How I'm using it to mount my Elecrow M6 Meshcore repeater
• Direct interview with TN07 at Huntsville Hamfest 2026
• Other use cases: antennas, cameras, sensors, and mission equipment
🔹My Favorite Gear - amazon.com/shop/km4ack
🔹Links mentioned in the video
Save 10% with code KM4ACK10
tn07.com/triple-fit-equipment-clamp
🔹Weekly Newsletter - https://mailchi.mp/40da1fe472e3/km4acknewsletter
🔹Follow Me
Twitter @km4ack
🔹Cool Ham Gear - km4ack.com
🔹Support the channel through Patreon - patreon.com/km4ack
🔹🔹🔹🔹🔹
As an Amazon Associate I earn from qualifying purchases










