Shapeoko Feeds & Speeds and Machining Tips! @nyccnc
Shapeoko Feeds & Speeds and Machining Tips!  @nyccnc
Uploaded December 2020 | Updated November 2026, 9 hours ago
Desktop CNC machines like the Carbide 3D Shapeoko can do amazing things if you have the right tooling, workholding, speeds, and feeds. This video is full of tips, tricks, and detailed information that can help you get a better cut! First, we'll take an in-depth look at tooling, the importance of flute count, and minimum chip load. Next, it's time for test cuts, speeds, feeds, and data review. Last but not least, we'll machine a relatively large piece of stock into an intake manifold plenum base with raised velocity stacks!

00:00 Intro
01:37 Tooling Options
02:05 Manufacturer Recommendations VS. Minimum Chipload
04:12 Flute Count
05:39 Machine Setup
06:56 Makita Router
08:11 Adaptive VS. Pocket
08:53 Test Part CAD
10:06 Adaptive Slot CAM
14:05 Test Cut 1: Shallow Adaptive
15:31 Test Cut 2: High Depth Adaptive
18:07 Test Cut 3: Old Speeds & Feeds
20:45 Test Cut Conclusion + Speeds & Feeds Software Comparison
21:51 Intake Manifold Speeds & Feeds
23:03 CNC Machining Intake Manifold (Adaptive/Roughing)
25:47 Vesc Data
27:13 CNC Machining Intake Manifold (Remaining Adaptive/Roughing)
27:43 CNC Machining Intake Manifold (Finishing - Scallop + 2D Contour)
27:58 Measuring The Part
28:43 Outro
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links for this video

Ways to Upgrade Your Shapeoko 3 | bit.ly/2KKHahF

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reach us / CNC Info:



Speeds & Feeds: provencut.com

Download Fusion 360: dpbolvw.net/click-9255839-12529306

Online Fusion 360 Training: bit.ly/LearnFusion360

Hands-On CNC Classes: nyccnc.com/events

SMW Products: saundersmachineworks.com

CNC Resources: nyccnc.com 5 Reasons to Use a Fixture Plate on Your CNC Machine: bit.ly/3sNA4uH
Shapeoko Feeds & Speeds and Machining Tips!Modeling and Machining Complex Chamfers in Fusion 360!How to Drill Small Holes: Tips, Tricks, and Speeds & Feeds for Micro Drilling!Johnny 5 Build Update!  Progress on Eyes, Head, and Neck!Reboot: Building Johnny 5 from Short Circuit!4th Axis CNC Milling Non-Cylindrical Parts Using Rotary Toolpath in Fusion 360Hard Milling a Pipe Organ Tuning Tool from O1 Tool Steel!How to Add a Time Stamp to Fusion 360 Post Processor G-Code!How to Mill a Sphere with Fusion 360 | Tormach 1100MX VS. DATRON NeoAMAZING Tour of Keselowski Advanced Manufacturing!  NASCAR Driver to Machine Shop!CR Onsrud Factory Tour | American Made CNC Routers & Machining CentersCan the Tormach 24R Cut Aluminum and Steel? Machine Test!
NYC CNC |

Shapeoko Feeds & Speeds and Machining Tips!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER