How to Drill Small Holes: Tips, Tricks, and Speeds & Feeds for Micro Drilling! @nyccnc
How to Drill Small Holes: Tips, Tricks, and Speeds & Feeds for Micro Drilling!  @nyccnc
Uploaded March 2022 | Updated November 2026, 5 minutes ago
Drilling small holes presents many challenges. From speeds and feeds to adjusting runout, micro tools require more effort! We are drilling these holes in aluminum on the Tormach 1100MX using a Harvey Tool 1/64 (0.016") drill and a Lakeshore Carbide 1/32 ( 0.031") Split Point Drill. We discuss the importance of tool shanks, holders, and adjusting runout. Happy Drilling!

00:00 Intro: Drilling with Carbide Micro Tools
00:20 Harvey Tool 1/64 - Carbide Drill with Stepped Shank
00:40 Lakeshore Carbide 135 Degree Split Point 1/32
01:00 Lakeshore Carbide Center Drill & Why Spotting Matters
01:15 Adjusting Runout
02:04 Spot Drilling, Drilling with Harvey Tool Speeds & Feeds
03:17 Drilling with Lakeshore Carbide Split Point Drill
04:32 Micro Tool Final Thoughts

5 Reasons to Use a Fixture Plate on Your CNC Machine: bit.ly/3sNA4uH
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links for this video

How to Adjust Tool Runout
nyccnc.com/tool-runout-test-does-tapping-work

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reach us / CNC Info:

Speeds & Feeds: provencut.com

Fusion 360 (Purchase, Support, Training): http://dsi.fyi/3yu7Mt0

Online Fusion 360 Training: bit.ly/LearnFusion360

SMW Products: saundersmachineworks.com

CNC Resources: nyccnc.com
How to Drill Small Holes: Tips, Tricks, and Speeds & Feeds for Micro Drilling!Johnny 5 Build Update!  Progress on Eyes, Head, and Neck!Reboot: Building Johnny 5 from Short Circuit!4th Axis CNC Milling Non-Cylindrical Parts Using Rotary Toolpath in Fusion 360Hard Milling a Pipe Organ Tuning Tool from O1 Tool Steel!How to Add a Time Stamp to Fusion 360 Post Processor G-Code!How to Mill a Sphere with Fusion 360 | Tormach 1100MX VS. DATRON NeoAMAZING Tour of Keselowski Advanced Manufacturing!  NASCAR Driver to Machine Shop!CR Onsrud Factory Tour | American Made CNC Routers & Machining CentersCan the Tormach 24R Cut Aluminum and Steel? Machine Test!CNC Shop Tour:  An Inside Look at a Shop FULL of Horizontal Machining Centers!CNC Super Glue Fixturing: Cheap, Reliable Workholding!
NYC CNC |

How to Drill Small Holes: Tips, Tricks, and Speeds & Feeds for Micro Drilling!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER