Set crossflight/Mini Pix/PIXHAWK on Helicopter / Episode 2 Setup @Radiolink_official
Set crossflight/Mini Pix/PIXHAWK on Helicopter / Episode 2 Setup  @Radiolink_official
Uploaded December 2023 | Updated November 2026, 9 hours ago
Set crossflight/Mini Pix/PIXHAWK on Helicopter / Episode 2 Setup

Download Mission Planner for crossflight from RadioLink official website and install it (radiolink.com/crossflight_missionplanner)

Connect crossflight to the computer with a USB cable. Setup--Install Firmware--Click helicopter icon
After installation, choose the right COM port, and CONNECT. Connected.
Setup--Mandatory Hardware. You can see these main settings.

You can set in this order
First, Accel calibration. It is best to do it before crossflight is mounted on helicopter. (Check the detailed tutorial on Accel calibration in the description)
Second, Compass setup.
If the arrow direction of crossflight points forward, but GPS arrow points backward, enter CONFIG--Full Parameter List, set COMPASS_ORIENT to Yaw 180 Click Write Params to save the modification

Fix the GPS and crossflight together according to the actual installation and click start to calibrate the compass.
Calibration is successful when there is a prompt to reboot crossflight (Check the detailed tutorial on compass calibration in the description)

Third, setup the transmitter.
Add a new model, such as acrobasic.
We need to set channel 5 and channel 8 in AUX channel. The flight modes can be controlled by channel 5. You can use 2 switches to control 6 flight modes.
Assign a switch to channel 8 to work as a safety switch.
Enter CONFIG-- Extended Tuning, set RC8 Opt to Motor Interlock
After the receiver is connected to crossflight, click Calibrate Radio. Push the joysticks. (Check the detailed tutorial on radio calibration in the description)
Fourth, Flight modes. Push the switches of channel 5 to set 6 flight modes.
Modify the percentage to make the flight modes in the transmitter the same as those in Mission Planner.
The flight mode will be displayed on the home screen, It is helpful to know the current flight modes.
In the next episode, we’ll introduce the swashplate.


Accel calibration tutorial:
youtube.com/watch?v=6n_jcbPmY5I

Compass calibration tutorial:
youtube.com/watch?v=XR_4e18F5W0

Radio calibration tutorial:
youtube.com/watch?v=dh9Lu2BOSnA

For more details of crossflight flight controller:
radiolink.com/crossflight

Purchase link of crossflight flight controller:
radiolink.com/crossflight_where_to_buy

You can send emails to after_service@radiolink.com.cn if you have any questions when using our products.

#helicopter #pixhawk #radiolink #crossflight
Set crossflight/Mini Pix/PIXHAWK on Helicopter / Episode 2 SetupRadiolink 3D Acrobatic RC Airplane with Byme-A Flight Controller GyroA.B.S Function on RC6GS V3/RC4GS V3Tutorial on how to Set T8FB & A560/Byme-AProfessional designer and manufacturer of RTF plane kits and accessories for about 23 yearsRadioLink in 10th ShenZhen International UAV EXPO 2025How to Adjust the Damping of the Joysticks of AT9S Pro/AT10II/T8FB/T8S?Nice to meet you in 2025 FAl World Drone Soccer Championships.💪Challenge: Ten minutes to master the vertical mode of Radiolink A560.How to Customize the Stick Mode/Switch/Knob on T16D/T12D?T16D/T12D Trainer Function with Wireless Trainer Cable
RadioLink |

Set crossflight/Mini Pix/PIXHAWK on Helicopter / Episode 2 Setup

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER