Uploaded September 2016 | Updated September 2026, 2 weeks ago

---

Send humidity and temperature data from the DHT11 sensor connected to the Things Uno Beta to the single channel Lora Gateway.
The single channel Lora Gateway relays the data back to The Things Network.

In this video the following is shown:
- How the humidity and temperature sensor (DHT11) is connected to the Things Uno Beta
- How to start the single channel Lora Gateway
- How to create an application in The Things Network dashboard
- How to copy the device address, network session key and application session key to the lora_dht11.ino sketch
- How to edit the decoder payload function
- How to verify and upload the sketch to the Things Uno Beta
- How to start the serial monitor in the Arduino IDE and check if humidity and temperature data is send
- How to check if The Things Network receives the humidity and temperature data from the Things Uno Beta

Download the DHT11 temperature and humidity sensor sketch:
mobilefish.com/download/lora/lora_dht11.ino.txt

Download The Things Network DHT11 decoder payload function
mobilefish.com/download/lora/tnt_dht11_decoder_payload_function.txt

Check out all my other videos about Single channel gateway with The Things Network
goo.gl/MwyoKH

Subscribe to my YouTube channel
goo.gl/61NFzK

#mobilefish #lorawan #lora #productreviews #productreview #TheThingsNetwork