Uploaded April 2026 | Updated November 2026, 18 hours ago
Input: yellow screw.
Output: green nut tube.
The gray bearing and the two beige bars attached to it serve as the base of the actuator.
The yellow, pink, and red screws have prismatic joints (key joints) between them so that they can rotate together.
The orange nut and the two beige bars attached to it can slide along the two beige bars of the gray bearing and, together with the yellow screw, form the first screw-nut drive.
The blue nut and the two beige bars attached to it can slide along the two beige bars of the orange nut and, together with the pink screw, form the second screw-nut drive.
The green nut tube can slide along the two beige bars of the blue nut and, together with the red screw, form the third screw-nut drive.
The orange nut has a planar joint (two hooks) with the pink screw, allowing them to move together along the axis while the pink screw can rotate around the axis.
The blue nut has a planar joint (two hooks) with the red screw, allowing them to move together along the axis while the red screw can rotate around the axis.
The first, second and third screw-nut drives have leads of L1, L2 and L3 mm of the same hand. If the input screw rotates N revolutions, the output green tube performs a displacement of N*(L1+L2+L3) mm.
STEP files of this video:
mediafire.com/file/ek9ritjj9kzp58p/Screw3stageTelescopicActuator2aSTEP.zip/file
Inventor files of this video:
mediafire.com/file/s6xfc31ufdj5ar0/Screw3stageTelescopicActuator2aInv.zip/file
Input: yellow screw.
Output: green nut tube.
The gray bearing and the two beige bars attached to it serve as the base of the actuator.
The yellow, pink, and red screws have prismatic joints (key joints) between them so that they can rotate together.
The orange nut and the two beige bars attached to it can slide along the two beige bars of the gray bearing and, together with the yellow screw, form the first screw-nut drive.
The blue nut and the two beige bars attached to it can slide along the two beige bars of the orange nut and, together with the pink screw, form the second screw-nut drive.
The green nut tube can slide along the two beige bars of the blue nut and, together with the red screw, form the third screw-nut drive.
The orange nut has a planar joint (two hooks) with the pink screw, allowing them to move together along the axis while the pink screw can rotate around the axis.
The blue nut has a planar joint (two hooks) with the red screw, allowing them to move together along the axis while the red screw can rotate around the axis.
The first, second and third screw-nut drives have leads of L1, L2 and L3 mm of the same hand. If the input screw rotates N revolutions, the output green tube performs a displacement of N*(L1+L2+L3) mm.
STEP files of this video:
mediafire.com/file/ek9ritjj9kzp58p/Screw3stageTelescopicActuator2aSTEP.zip/file
Inventor files of this video:
mediafire.com/file/s6xfc31ufdj5ar0/Screw3stageTelescopicActuator2aInv.zip/file










