SAVING BARN FIND JET SKIS (that don't run so good) @ZeroToAwesome

Uploaded July 2023 | Updated September 2026, 2 weeks ago

BIG THANKS TO MR. NOBODY!!! Go check out his channel if you like DeLoreans and FREEDOM (and who doesn't?!?!?): youtube.com/channel/UCTSb8gzwO2640z2Or1cfK-Q

SAVING BARN FIND JET SKIS (that dont run so good)

Unplanned Review: The Robot Mower That I Am NOT Supposed To Have!

The contractor that stole $50k from me JUST RIPPED OFF ANOTHER FAMILY!!! This is their story.

Why I Sold My New Tesla Model Y: The Honest Truth

Bagged RX-7 With Camaro Power, Corvette Wheels... WAY Too Many Spacers!!

WHAT HAPPENS WHEN A ROBOT MOWS YOUR YARD FOR A YEAR: Husqvarna Automower update

$Reviving My Garage 3D Printer with a Budget Fix & Printing a Completely Useless Part! I think the robot got this description entirely wrong, but enjoy anyways! Welcome back to Zero to Awesome! If you’ve been struggling with your 3D printer lately, you’re not alone. Many enthusiasts face hiccups with their machines, but the good news is that fixing them doesn’t have to be an expensive or time-consuming ordeal. In today’s video, we’ll show you a quick and easy fix for your garage 3D printer using an affordable part that you can find almost anywhere. Say goodbye to frustrating printing problems, and hello to smooth, high-quality creations! Before we dive into the repair, let’s talk about some common issues that 3D printers face. Whether it’s layer misalignment, inconsistent extrusion, or bed adhesion problems, these issues can lead to disappointing prints. Often, the culprit can be something as simple as a worn-out part. In today’s tutorial, we’ll focus on one of the most common issues: a faulty extruder gear that can cause inconsistent filament feeding. To begin, gather your tools and the replacement part. You’ll need a small screwdriver, a wrench, and the affordable extruder gear that we’ll be installing. You can find these gears at local hardware stores or online for a fraction of the cost of major repairs. Now, let’s get started with the step-by-step guide. First, ensure that your 3D printer is powered off and unplugged. Safety should always be your top priority! Next, remove the filament from the printer. This will give you better access to the extruder assembly. Once the filament is out, locate the extruder gear on the printer. This is often found on the side of the extruder assembly. Use your screwdriver to carefully remove the screws securing the gear in place. Make sure to keep these screws in a safe spot, as you’ll need them to attach the new gear. After removing the screws, gently pull the old extruder gear off the motor shaft. If it’s stuck, a little wiggle should help dislodge it. Now it’s time to install the new extruder gear. Align it with the motor shaft and push it into place. It should fit snugly but not require excessive force. Reattach the screws you removed earlier, ensuring that the gear is secure but not over-tightened, as this could damage the motor. With the new gear in place, it’s time to reinsert the filament. Select a filament that works well with your printer, and feed it through the extruder. Power up your 3D printer and run a test print. For this demonstration, we’ll be printing a hilarious tiny car lift! Watching the printer come to life and create something fun is one of the most rewarding parts of the process. As the print progresses, keep an eye on how the filament is being extruded. If everything is working properly, you should see a smooth and consistent flow without any clogs or skips. If you notice any issues, double-check the installation of the new gear and make sure the filament is properly fed into the extruder. Once your tiny car lift is complete, you’ll have not just a functional printer but also a fun new creation to show off! Don’t forget to share your success stories in the comments below. If you found this video helpful, please give it a thumbs up, subscribe to our channel, and hit the bell icon for more awesome tips and tricks. We’re here to help you go from zero to awesome in your 3D printing journey! Let’s keep creating and printing amazing things together!$

THE FORD SHIFTING JERK CAME BACK!!! (so I fixed it on the side of the road)