Uploaded October 2021 | Updated November 2026, 3 hours ago
As we are spraying our propeller chain drive with oil for the Switchblade flying sports car prototype, we had to design a cover to keep the oil from making a mess out of the engine compartment. The oil cools the chain, which gets heated up due to the forces on the chain, and the case recycles the oil and allows the oil to cool.
In this video you can see one of the main parts of the cover being printed using high temperature plastic in a FLASHFORGE GUIDER II printer.
Check our more about the Switchblade at: samsonsky.com
* Resources *
Phone: (855) 7-SAMSON
Website: samsonsky.com
Facebook: facebook.com/SamsonMotorsSwitchblade
Instagram: instagram.com/samsonswitchblade/?hl=en
Twitter: twitter.com/FlyingSportsCar
#prototypepreps #innovation #flyingsportscar
As we are spraying our propeller chain drive with oil for the Switchblade flying sports car prototype, we had to design a cover to keep the oil from making a mess out of the engine compartment. The oil cools the chain, which gets heated up due to the forces on the chain, and the case recycles the oil and allows the oil to cool.
In this video you can see one of the main parts of the cover being printed using high temperature plastic in a FLASHFORGE GUIDER II printer.
Check our more about the Switchblade at: samsonsky.com
* Resources *
Phone: (855) 7-SAMSON
Website: samsonsky.com
Facebook: facebook.com/SamsonMotorsSwitchblade
Instagram: instagram.com/samsonswitchblade/?hl=en
Twitter: twitter.com/FlyingSportsCar
#prototypepreps #innovation #flyingsportscar


![ACCELERATION TESTING WITH PROP POWER [August 2020]
Were continuing the Switchblade acceleration runs, using prop power only. No wings or tail. These test runs are enabling us to dial everything in. This video shows the end of a run where we pull back the throttle, brake and exit the runway. While not our fastest time, we wanted to show you a close up view of the action.
You can find out more about the Samson Sky Switchblade at: https://www.samsonsky.com
* Resources *
Phone: (855) 7-SAMSON
Website: https://www.samsonsky.com/
Facebook: https://www.facebook.com/SamsonMotorsSwitchblade/
Instagram: https://www.instagram.com/samsonswitchblade/?hl=en
Twitter: https://twitter.com/FlyingSportsCar ACCELERATION TESTING WITH PROP POWER [August 2020]](https://i.ytimg.com/vi/xIovheUYwOQ/mqdefault.jpg)
![Taxi Testing the Switchblade [March 2020]
After some tweaks to the engine, turbo installation and alternator, we are back out taxi testing the Switchblade. These runs are propeller powered. We need to break in new piston rings, so are taking it slowly for a day or so. This is one run that accelerated to 67 mph in a space of 1,400 feet, and then hard braking to stop in 230 feet. Not bad!
How do you like it?
You can reserve your own Samson Sky Switchblade at: https://www.samsonsky.com/reserve/
* Resources *
Phone: (855) 7-SAMSON
Website: https://www.samsonsky.com/
Facebook: https://www.facebook.com/SamsonMotorsSwitchblade/
Instagram: https://www.instagram.com/samsonswitchblade/?hl=en
Twitter: https://twitter.com/FlyingSportsCar Taxi Testing the Switchblade [March 2020]](https://i.ytimg.com/vi/xJxsny-e4HU/mqdefault.jpg)

![Setting the Switchblade Tail Straight | Samson Sky [2021]
In this video you can see the team using a laser level to set the tail boom perfectly straight.
In between engine tests, we worked just a bit on the tail boom. The tail has been on the body numerous times, but now we want to fix the tail boom locking points permanently. For that we set up the laser to ensure we had the tail straight back from the body.
This very short video clip shows how we made sure the tail boom was positioned correctly before drilling the bolts through the locking pins. Engineer David Nobles is controlling the lazer from up in the loft and Sam Bousfield is taking measurements at the tail boom.
You can find out more by visiting our website at: https://www.samsonsky.com
* Resources *
Phone: (855) 7-SAMSON
Website: https://www.samsonsky.com/
Facebook: https://www.facebook.com/SamsonMotorsSwitchblade/
Instagram: https://www.instagram.com/samsonswitchblade/?hl=en
Twitter: https://twitter.com/FlyingSportsCar
#flyingcar #flyingsportscar #amazingflyingvehicle #innovativedesign Setting the Switchblade Tail Straight | Samson Sky [2021]](https://i.ytimg.com/vi/yO_Hn5yn4o8/mqdefault.jpg)



