Setting the Switchblade Tail Straight | Samson Sky [2021] @SamsonSkySwitchblade
Setting the Switchblade Tail Straight | Samson Sky [2021]  @SamsonSkySwitchblade
Uploaded June 2021 | Updated November 2026, 3 days ago
In this video you can see the team using a laser level to set the tail boom perfectly straight.

In between engine tests, we worked just a bit on the tail boom. The tail has been on the body numerous times, but now we want to fix the tail boom locking points permanently. For that we set up the laser to ensure we had the tail straight back from the body.

This very short video clip shows how we made sure the tail boom was positioned correctly before drilling the bolts through the locking pins. Engineer David Nobles is controlling the lazer from up in the loft and Sam Bousfield is taking measurements at the tail boom.

You can find out more by visiting our website at: samsonsky.com

* Resources *
Phone: (855) 7-SAMSON
Website: samsonsky.com
Facebook: facebook.com/SamsonMotorsSwitchblade
Instagram: instagram.com/samsonswitchblade/?hl=en
Twitter: twitter.com/FlyingSportsCar

#flyingcar #flyingsportscar #amazingflyingvehicle #innovativedesign
Setting the Switchblade Tail Straight | Samson Sky [2021]First parts made for the Switchblade flying prototype!Samson Sky Update: CENTERING DEVICE FOR DRILLING HOLES IN TUBESSWITCHBLADE WINGS GO ON IN RECORD TIMESAMSON SWITCHBLADE FLYING SPORTS CAR GETS CUSTOM RADIATOR DUCTS
Samson Sky Switchblade |

Setting the Switchblade Tail Straight | Samson Sky [2021]

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER