Uploaded November 2020 | Updated November 2026, 3 hours ago
Our new Drop Test fixture was created to test the suspension systems for now and into the future. The FAA requires such a test for certified aircraft. Although not required for experimental/kit aircraft like the Switchblade, we are doing our drop testing to certified standards.
We dropped the sled for the first time to check that the sled release mechanism worked, and that the sled would drop cleanly. This testing went very well, with no problems found. You can see one of the drops in this 10 second time-lapse video.
Visit us online at samsonsky.com
* Resources *
Phone: (855) 7-SAMSON
Website: samsonsky.com
Facebook: facebook.com/SamsonMotorsSwitchblade
Instagram: instagram.com/samsonswitchblade/?hl=en
Twitter: twitter.com/FlyingSportsCar
Our new Drop Test fixture was created to test the suspension systems for now and into the future. The FAA requires such a test for certified aircraft. Although not required for experimental/kit aircraft like the Switchblade, we are doing our drop testing to certified standards.
We dropped the sled for the first time to check that the sled release mechanism worked, and that the sled would drop cleanly. This testing went very well, with no problems found. You can see one of the drops in this 10 second time-lapse video.
Visit us online at samsonsky.com
* Resources *
Phone: (855) 7-SAMSON
Website: samsonsky.com
Facebook: facebook.com/SamsonMotorsSwitchblade
Instagram: instagram.com/samsonswitchblade/?hl=en
Twitter: twitter.com/FlyingSportsCar
![Setting the Switchblade Tail Straight | Samson Sky [2021]
In this video you can see the team using a laser level to set the tail boom perfectly straight.
In between engine tests, we worked just a bit on the tail boom. The tail has been on the body numerous times, but now we want to fix the tail boom locking points permanently. For that we set up the laser to ensure we had the tail straight back from the body.
This very short video clip shows how we made sure the tail boom was positioned correctly before drilling the bolts through the locking pins. Engineer David Nobles is controlling the lazer from up in the loft and Sam Bousfield is taking measurements at the tail boom.
You can find out more by visiting our website at: https://www.samsonsky.com
* Resources *
Phone: (855) 7-SAMSON
Website: https://www.samsonsky.com/
Facebook: https://www.facebook.com/SamsonMotorsSwitchblade/
Instagram: https://www.instagram.com/samsonswitchblade/?hl=en
Twitter: https://twitter.com/FlyingSportsCar
#flyingcar #flyingsportscar #amazingflyingvehicle #innovativedesign Setting the Switchblade Tail Straight | Samson Sky [2021]](https://i.ytimg.com/vi/yO_Hn5yn4o8/mqdefault.jpg)



