Uploaded May 2015 | Updated September 2026, 3 hours ago
My RoboMow RS612 mowing a very small 15' x 19' (285 sq ft or 26 meters square) section of my front lawn. RoboMow FPV!
I have this section configured in my Robomow as Separated Zone A, 0-500 sq ft with a 68 ft perimeter. There's no base station in this zone, so I manually drive the RoboMow up the driveway from the backyard using the iPhone app remote control. Unfortunately, my house is very old and doesn't have an external AC outlet on the front of the house, so I use a Yeti 400 solar generator (basically a car battery with a built-in AC inverter and charge controller) to power the perimeter wire stake.
You might wonder why the RoboMow doesn't mow the left most portion of the yard. The reason is simple: the yard is too steep there. The RoboMow can handle the incline just fine. However, if the RoboMow stops it's routine in that section of the lawn it will freewheel off the stone wall! The RoboMow doesn't have a parking brake! I just get out a small and light reel mower and mow that section manually. Takes a minute or two.
The RS612 is rated to handle 1/4 acre. I personally have about .3 acres and it works just fine. It even mows around the wood piles in my backyard without complaint!
If you're interested in buying this robotic mower, please use the link below. If you use this link to make your purchase, I receive a small commission, but it doesn't cost you a dime! These links help me continue to make great videos for this channel.
Robomow RS612 Robotic Lawn Mower: [amazon affiliate] amzn.to/1RP2j6H
My RoboMow RS612 mowing a very small 15' x 19' (285 sq ft or 26 meters square) section of my front lawn. RoboMow FPV!
I have this section configured in my Robomow as Separated Zone A, 0-500 sq ft with a 68 ft perimeter. There's no base station in this zone, so I manually drive the RoboMow up the driveway from the backyard using the iPhone app remote control. Unfortunately, my house is very old and doesn't have an external AC outlet on the front of the house, so I use a Yeti 400 solar generator (basically a car battery with a built-in AC inverter and charge controller) to power the perimeter wire stake.
You might wonder why the RoboMow doesn't mow the left most portion of the yard. The reason is simple: the yard is too steep there. The RoboMow can handle the incline just fine. However, if the RoboMow stops it's routine in that section of the lawn it will freewheel off the stone wall! The RoboMow doesn't have a parking brake! I just get out a small and light reel mower and mow that section manually. Takes a minute or two.
The RS612 is rated to handle 1/4 acre. I personally have about .3 acres and it works just fine. It even mows around the wood piles in my backyard without complaint!
If you're interested in buying this robotic mower, please use the link below. If you use this link to make your purchase, I receive a small commission, but it doesn't cost you a dime! These links help me continue to make great videos for this channel.
Robomow RS612 Robotic Lawn Mower: [amazon affiliate] amzn.to/1RP2j6H

![DIY Folding solar car battery charger
Do you have a vehicle you dont drive often? This DIY folding solar car battery charger is a great way to ensure it always starts.
Curious about the FOLDING solar panels in this video? Click the links below:
KINGSOLAR™ Highest Efficient 60W Foldable Solar Panel Portable Solar Charger Dual Output (USB Port + DC Output): [affiliate] http://amzn.to/1XsEFLq
Instapark® Mercury27 Portable & Foldable 27 Watts Solar Battery Charger with DC 12V Output: [affiliate] http://amzn.to/1MtvIkB
Heres the power meter used in the video:
Watts Up RC Watt Meter & Power Analyzer WU100 Version 2 SALE! [affiliate] http://amzn.to/1QLil0X
This is the charge controller I use in the video:
HQRP Solar 10A Charge Power Controller / Regulator 12V / 24V 10 Amp with LED Indicator plus HQRP UV Meter: [affiliate] http://amzn.to/1MtzhqM
But this one should also work (untested):
Instapark INCC1205 12V / 5A Waterproof PWM Solar Charge Controller: [affiliate] http://amzn.to/1Pyx7B7
Finally, this is the cigarette lighter extension cable I sacrificed to the power gods:
Milliard 12ft 12V Car Outlet Cigarette Plug Extension Cord/Cigarette Car Extender Cable with 5 Amp Fuse for Protecting Devices: [affiliate] http://amzn.to/1PyxhbI
Here are some of the tools I use in the video:
Anderson Powerpole Connectors 10 Pair Genuine: [amazon affiliate] http://amzn.to/1Kbuxj5
Crimper, Ergo- Anderson Power Pole Products: [amazon affiliate] http://amzn.to/1Kbvo2Y
Klein Automatic Wire Stripper: [amazon affiliate] http://amzn.to/1KKuEqK
Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow): [affiliate] http://amzn.to/1XsEZKd
Curious about the micro USB cigarette lighter adapter? Its the best one Ive found so far:
Belkin Micro Car Charger with 3-Foot 30-Pin ChargeSync Cable for iPhone 4 / 4S (2.1 AMP): [affiliate] http://amzn.to/1MtvZEd
Here are some of the materials used in the video:
Vktech 150pcs 2:1 Heat Shrink Tubing Tube Sleeving Wire Cable 8 Sizes 2-13mm Black: [affiliate] http://amzn.to/1Mtw5vq
Kester 44 Rosin Core Solder 66/44 0.80mm(0.31 inches) 1 lb. Spool: [affiliate] http://amzn.to/1VOQU6L DIY Folding solar car battery charger](https://i.ytimg.com/vi/CxXZBKfLUEM/mqdefault.jpg)
![Chameleon Ti - Gate Breaker vs Dal T5045C vs Gemfan 5152
My interest in drones started this channel back in 2015. Ive recently become interested in them again with the purchase of an Armattan Chameleon Ti. Lets explore some prop options for this awesome freestyle drone.
Chameleon Ti parts list
Armattan Chameleon Ti Frame: [affiliate] https://amzn.to/2IzVFyq
Filmed on GoPro Session 5: [affiliate] https://amzn.to/2uMoHbX
Armattan 30a ESC running DShot600
Armattan Oomph 2306 2450kv motors
Props in this video
Gemfan 5152: [affiliate] https://amzn.to/2GF2luv
Dal T5045C: [affiliate] https://amzn.to/2GEFzmg
Allen wrenches I use to change props
Aiskaer full-color lightweight titanium nitride coating Hex Driver Wrench 4 Piece Set,Hex Screw driver Tools Kit Set for RC Helicopter (1.5mm/2mm/2.5mm/3.0mm): [affiliate] https://amzn.to/2qbTOrJ
Radio
FrSky Taranis X9D Plus: [affiliate] https://amzn.to/2GElCQD
M9-R hall sensor gimbals: [affiliate] https://amzn.to/2q8JPn6
Goggles
Fatshark Dominator HD: [affiliate] (latest model) https://amzn.to/2EoytjQ
Furious FPV True-D Diversity Receiver: [affiliate] https://amzn.to/2q9ar8s
fat Shark FSV1814 18650 Li-Ion Cell Battery Holder Goggle Headset Battery Case for Fat shark Dominator V3 HD3 ATTITUDE V3 V4 FPV Quad Race: [affiliate] https://amzn.to/2ItYnW8
NCR18650B 3.7 Volt 18650 3400 mAh Rechargeable Li-ion Battery for Panasonic [4pcs] by Panasonic: [affiliate] https://amzn.to/2ItYtwY
XTAR Xtar-VC4-Charger-T VC4 Li-ion/Ni-MH Battery Charger Premium USB LCD Display Charger Compatibale with Li-ion Battery and Ni-MH battery: [affiliate] https://amzn.to/2q9RiSZ Chameleon Ti - Gate Breaker vs Dal T5045C vs Gemfan 5152](https://i.ytimg.com/vi/D5lEiT1JDi0/mqdefault.jpg)
![Game Capture HD60 MacOS 2.5 Video Corruption Regression Bug
This is a software regression issue I ran into while filming my Hackintosh El Capitan to Sierra upgrade video. I lost the entire session due to this bug, so I wanted to reproduce it, find a workaround (hopefully saving other people time), and submit the problem to El Gatos dev team so they can fix it.
This video also provides a bit of a behind the scenes look at how I film my Hackintosh videos.
In case you want to know more:
ElGato Game Capture HD60: [affiliate] http://amzn.to/2gG5vAP Game Capture HD60 MacOS 2.5 Video Corruption Regression Bug](https://i.ytimg.com/vi/DX0n0Vcwy8c/mqdefault.jpg)

![Venom Pro Quad Charger Review
Do you spend too much time charging your lipo batteries? The Venom Pro Quad Charger can help. Watch to learn more!
Products used in this video:
Venom Pro Quad 400 Watt (100W x 4) 7 Amp 4-Port AC/DC Multi-Chemistry LiPo, LiHV, NiMH Battery Balance Charger with Two 5V 2.3A USB Outputs with XT60, Deans, HXT, Tamyia, EC3, JST
Amazon US: [affiliate] https://amzn.to/2HCyZBt
XT30 Connector Plug - 4mm Banana Plugs Battery Charge Lead Adapter Cable - 2 PACK - Apex RC Products #1414
Amazon US: [affiliate] https://amzn.to/2KplNO4
Amazon UK: [affiliate] https://amzn.to/2HEodXf
XT60 Connector Plug - 4mm Banana Plugs Battery Charge Lead Adapter Cable - 2 PACK - Apex RC Products #1415
Amazon US: [affiliate] https://amzn.to/2HE57V6
Amazon UK: [affiliate] https://amzn.to/2HCzifB
COLCASE Fireproof Explosionproof Lipo Safe Bag for Lipo Battery Storage and Charging , Large Space Highly Sturdy Double Zipper Lipo Battery Guard (198x150x135mm)
Amazon US: [affiliate] https://amzn.to/2KnmbwA
Amazon UK: [affiliate] https://amzn.to/2HCzifB
RC Electronics, Inc. Watts Up WU100 DC Watt meter and Power Analyzer (Blue)
Amazon US: [affiliate] https://amzn.to/2JC1I5Q
Amazon UK: [affiliate] https://amzn.to/2HFywdI
Goal Zero Yeti 400 Portable Power Station, 400Wh Battery Powered Generator Alternative with 12V, AC and USB Outputs
Amazon US: [affiliate] https://amzn.to/2JDjN3C
Amazon UK: [affiliate] https://amzn.to/2JEvozn Venom Pro Quad Charger Review](https://i.ytimg.com/vi/EWN91SgT_m8/mqdefault.jpg)
![Hackintosh Build i7-4790k - Part 1
Have you ever wanted to build a Hackintosh? Here is a step by step guide with currently available hardware via Amazon Prime. This is a purpose built machine, so it is well supported and installs with minimal fuss. Part 1 is the hardware description, unboxing, and assembly. Part 2 will be the software installation.
Hardware used in this build:
Corsair Vengeance Series Black C70 Mid Tower Computer Case (CC-9011016-WW)
US: [affiliate] http://amzn.to/1Tix0gT
UK: [affiliate] http://amzn.to/2kEpzKv
CA: [affiliate] http://amzn.to/2y8u57k
Crucial Ballistix Sport 16GB Kit (8GBx2) DDR3 1600 MT/s (PC3-12800)
US: [affiliate] http://amzn.to/1Tix4gS
UK: [affiliate] http://amzn.to/2i1XlZe
CA: [affiliate] http://amzn.to/2g9fCmQ
Samsung 850 EVO 120GB 2.5-Inch SATA III Internal SSD (MZ-75E120B/AM)
US: [affiliate] http://amzn.to/1NMAGDY
UK: [affiliate] http://amzn.to/2kDAC6Z
CA: [affiliate] http://amzn.to/2ydYIcU
Seagate 3TB Desktop HDD SATA 6Gb/s 64MB Cache 3.5-Inch Internal Bare Drive (ST3000DM001)
US: [affiliate] http://amzn.to/1klmXeP
UK: [affiliate] http://amzn.to/2g9bcwC
CA: [affiliate] http://amzn.to/2y8vDya
Intel Core BX80646I74790K i7-4790K Processor (8M Cache, up to 4.40 GHz)
US: [affiliate] http://amzn.to/1NMB4SU
UK: [affiliate] http://amzn.to/2g9CTVW
CA: [affiliate] http://amzn.to/2zbQi4h
Corsair RM Series 650 Watt ATX/EPS 80PLUS Gold-Certified Power Supply - CP-9020054-NA RM650
US: [affiliate] http://amzn.to/1NMBadd
UK: [affiliate] http://amzn.to/2yDYNIA
CA: [affiliate] http://amzn.to/2y9zf2N
Gigabyte GA-Z97-HD3 LGA 1150 Z97 HDMI 2-Way CrossFire ATX Motherboard
US: [affiliate] http://amzn.to/1NMBicO
UK: [affiliate] http://amzn.to/2yE80AI
CA: [affiliate] http://amzn.to/2y9gfkY
TP-LINK TL-WDN4800 Dual Band Wireless N900 PCI Express Adapter
US: [affiliate] http://amzn.to/1NMBqJr
UK: [affiliate] http://amzn.to/2g9sWrC
CA: [affiliate] http://amzn.to/2zcAzC0
(This is the graphics card in the video, but I recommend the 970, below) EVGA GeForce GT 740 Superclocked Single Slot 2GB DDR3 Graphics Cards 02G-P4-2742-KR
US: [affiliate] http://amzn.to/1Tiy9oX
UK: [affiliate] http://amzn.to/2kEvlvB
CA: [affiliate] http://amzn.to/2y9rTMM
(This is the card I ended up putting in my machine) EVGA GeForce GTX 970 4GB SSC Gaming ACX 2.0+ Cooling Graphics Card (04G-P4-3975-KR)
US: [affiliate] http://amzn.to/1TiyeJf
UK: [affiliate] http://amzn.to/2g9CF0Z
CA: [affiliate] http://amzn.to/2fYqpwx
Part 2 is the software installation: https://youtu.be/sZn8OdA-xR0
Part 3 is about SSD vs HDD performance in FCPX, and how to determine performance bottlenecks: https://youtu.be/bzgA8M9R0wE
Part 4 is about GTX 740 vs GTX 970 performance in FCPX: https://youtu.be/QSJt9e6PvRw
Part 5 is FCPX problems with the GTX 970: https://youtu.be/kO7wno34RTg
Part 6 is Hackintosh Windows 10 Dual Booting: https://youtu.be/-ryV3BEy5IU Hackintosh Build i7-4790k - Part 1](https://i.ytimg.com/vi/EuJPWxj8WYA/mqdefault.jpg)

![Yeti 400 Tear down (replacing red inverter fuse)
Disassembly of a Goal Zero Yeti 400, replacing the red 40A inverter fuse. This procedure can be followed to remove/replace the battery too.
Follow up video: https://youtu.be/lffZXpnHlwY
Here are links to some of the products used in the video:
Goal Zero Yeti 400 on Amazon: [affiliate] http://amzn.to/1IdIUod
Hakko FX888D soldering iron: [amazon affiliate] http://amzn.to/1L0ZPNq
Hakko T18-D24 chisel tip: [amazon affiliate] http://amzn.to/1KGrIcc
Wiha Anti-static tweezers: [amazon affiliate] http://amzn.to/1Jz8qkS
Helping Hands with Magnifying Glass: [amazon affiliate] http://amzn.to/1JC97Kj Yeti 400 Tear down (replacing red inverter fuse)](https://i.ytimg.com/vi/FWYIQDA-QCU/mqdefault.jpg)
![Welch Allyn 97200-MS 3.5V Diagnostic Smart Set Review
Welch Allyn 97200-MS 3.5V Diagnostic Smart Set Review
We got ours from amazon: [affiliate] http://amzn.to/1IiCXE8
Amateur review for anyone curious about what this item is, how it works, and the functionality provided by each piece in the set.
We bought one of these sets for checking our childrens ears as a pre-diagnostic before taking them to a real doctor. Im a big fan of expensive tools, so I thought Id try the top of the line model first. Its a great kit and I intended to keep it. However, they included the wrong otoscope head, so well be returning it.
Undaunted, and seeing opportunity in our own misfortune, we thought we would do a quick review for your benefit. There isnt much on YouTube right now about this product. Might save someone some time.
Were just parents, not medical students, so well probably try the significantly less expensive, non lithium-ion Welch Allyn PocketScope next. The 97200-MS is just a bit too expensive for occasional use, especially considering the replacement cost of lithium ion battery handles and the 3-5 year lifespan of lithium ion battery technology.
However, we think this kit is probably ideal for professionals and students. Take a look. Welch Allyn 97200-MS 3.5V Diagnostic Smart Set Review](https://i.ytimg.com/vi/FisX2PIpOJU/mqdefault.jpg)
