Uploaded January 2024 | Updated September 2026, 2 weeks ago
Goofing around with PETG and SCV to see how it affects models that are not functional prints.
600mms, 0.4 std nozzle, 285C, PETG, 40K acceleration, 100SCV, 35% fan, 0.7S layer time, min speed for speed reduction based on layer time 70mms. 50mms retraction, 80mms unretract @ 0.8mm.
Sorry the exposure is so bad. These LED's make for terrible lighting for cameras.
I haven't printed PETG in a good while and wanted to see what it does. Definitely does not need much fan or problems will arise! But prints well at high speed. Just don't expect the cleanliness of PLA or ABS (
thingiverse.com/thing:378670
Goofing around with PETG and SCV to see how it affects models that are not functional prints.
600mms, 0.4 std nozzle, 285C, PETG, 40K acceleration, 100SCV, 35% fan, 0.7S layer time, min speed for speed reduction based on layer time 70mms. 50mms retraction, 80mms unretract @ 0.8mm.
Sorry the exposure is so bad. These LED's make for terrible lighting for cameras.
I haven't printed PETG in a good while and wanted to see what it does. Definitely does not need much fan or problems will arise! But prints well at high speed. Just don't expect the cleanliness of PLA or ABS (
thingiverse.com/thing:378670
