atkelar | Repair #1 - Tractor "Oil Check" (Part 4) @atkelar | Uploaded October 2020 | Updated October 2024, 1 hour ago.
Tractor Repair/Restoration - Part 4 of 4
And here we have it: the fourth and final episode of tractor repair/restoration of 2020!
In this episode, I'm finishing on the engine - including some whoopsies with the clutch. At the end, the tractor is out for a little spin, despite some smaller issue with the second cylinder... most likely the valves, or maybe the injector... as I cannot think of anything else that would cause that; the piston and rings are new, the liner was in the same good size/shape as the other two, the injection pump works and the line is clear... and that's about all that would affect the firing.
Chapters
0:00 Intro
0:45 Cylinder Head and Valves / Fuel System
1:41 Timing Adjustment
2:35 Water Pump and Alternator with Belt
3:12 Head Mount / Air Filter
4:18 Rocker Assembly
5:25 Exhaust and Intake
6:15 Coolant Loop
7:00 Coolant and Oil / First Start Attempt
8:03 Horn Cleanup / Headlights
9:02 First Coughs / Wheels
9:34 First "Drive" and Clutch Issue / Head Bolts Re-Tighten
10:38 Clutch Explanation and Fix
11:46 Proper Run and Drive
12:30 Air Deflector / Panels and Hood
13:32 Battery Switch
14:45 New Decals / Before and After / Front Loader Problem
16:03 Closing / Credits / Outtake
Donate a few bucks for some coffee (or some equipment upgrades): ko-fi.com/atkelar
Music: My Train's A Comin'
Unicorn Heads (YouTube Audio Library)
Tractor Repair/Restoration - Part 4 of 4
And here we have it: the fourth and final episode of tractor repair/restoration of 2020!
In this episode, I'm finishing on the engine - including some whoopsies with the clutch. At the end, the tractor is out for a little spin, despite some smaller issue with the second cylinder... most likely the valves, or maybe the injector... as I cannot think of anything else that would cause that; the piston and rings are new, the liner was in the same good size/shape as the other two, the injection pump works and the line is clear... and that's about all that would affect the firing.
Chapters
0:00 Intro
0:45 Cylinder Head and Valves / Fuel System
1:41 Timing Adjustment
2:35 Water Pump and Alternator with Belt
3:12 Head Mount / Air Filter
4:18 Rocker Assembly
5:25 Exhaust and Intake
6:15 Coolant Loop
7:00 Coolant and Oil / First Start Attempt
8:03 Horn Cleanup / Headlights
9:02 First Coughs / Wheels
9:34 First "Drive" and Clutch Issue / Head Bolts Re-Tighten
10:38 Clutch Explanation and Fix
11:46 Proper Run and Drive
12:30 Air Deflector / Panels and Hood
13:32 Battery Switch
14:45 New Decals / Before and After / Front Loader Problem
16:03 Closing / Credits / Outtake
Donate a few bucks for some coffee (or some equipment upgrades): ko-fi.com/atkelar
Music: My Train's A Comin'
Unicorn Heads (YouTube Audio Library)
