Uploaded January 2026 | Updated November 2026, 1 day ago
We take a look at the Evaluation Kit for the RA8P1 MCU Group from Renesas. With the 1 gigahertz Arm Cortex-M85 core and Ethos-U55 NPU in the RA8P1 MCU, it can be used for development of AI-based voice, vision, and real-time analytics applications.
Inside the box, you’ll find the EK-RA8P1 board, a 7 inch display, a 5 megapixel camera module and FFC cable, various USB cables, an ethernet patch cable, and mounting hardware.
For this demo, we’re going to run the camera and graphics example that is pre-loaded on the evaluation kit.
Plug the camera FFC into the connector on the back of the board, then install the display on the corresponding header on the board. You’ll need to remove and install some of the screws and spacers in the kit to mount everything correctly. Then use a USB-C cable to connect your computer to the board’s J10 USB Debug port.
Connect a serial terminal as described on the display and tap the X to go to the home screen. We can launch various demos from the menu in the top left or by using the terminal. Note that the external memory read write demo can only be initiated from the terminal.
Tap the display demo and you’ll see the camera view. If you touch the display you’ll get touchpoints overlaid on the camera feed, and the touchpoint coordinates will be shown on the serial terminal.
The display demo highlights some of the HMI aspects of the RA8P1, but Renesas also offers AI-based face detection and image classification examples that you can download and install using e2 studio.
digikey.com/en/product-highlight/r/renesas/ra8p1-mcu-ai-accelerated-microcontroller
digikey.com/en/products/detail/renesas-electronics-corporation/RTK7EKA8P1S01001BE/26738127
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
We take a look at the Evaluation Kit for the RA8P1 MCU Group from Renesas. With the 1 gigahertz Arm Cortex-M85 core and Ethos-U55 NPU in the RA8P1 MCU, it can be used for development of AI-based voice, vision, and real-time analytics applications.
Inside the box, you’ll find the EK-RA8P1 board, a 7 inch display, a 5 megapixel camera module and FFC cable, various USB cables, an ethernet patch cable, and mounting hardware.
For this demo, we’re going to run the camera and graphics example that is pre-loaded on the evaluation kit.
Plug the camera FFC into the connector on the back of the board, then install the display on the corresponding header on the board. You’ll need to remove and install some of the screws and spacers in the kit to mount everything correctly. Then use a USB-C cable to connect your computer to the board’s J10 USB Debug port.
Connect a serial terminal as described on the display and tap the X to go to the home screen. We can launch various demos from the menu in the top left or by using the terminal. Note that the external memory read write demo can only be initiated from the terminal.
Tap the display demo and you’ll see the camera view. If you touch the display you’ll get touchpoints overlaid on the camera feed, and the touchpoint coordinates will be shown on the serial terminal.
The display demo highlights some of the HMI aspects of the RA8P1, but Renesas also offers AI-based face detection and image classification examples that you can download and install using e2 studio.
digikey.com/en/product-highlight/r/renesas/ra8p1-mcu-ai-accelerated-microcontroller
digikey.com/en/products/detail/renesas-electronics-corporation/RTK7EKA8P1S01001BE/26738127
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey










