Reinforcing Heavy Duty Wheel Dollies with ¼ Inch Steel @ToolsToday
Reinforcing Heavy Duty Wheel Dollies with ¼ Inch Steel  @ToolsToday
Uploaded September 2026 | Updated November 2026, 5 hours ago
After the caster mounting areas on these heavy-duty wheel dollies started bending while moving our CNC, we reinforced them with ¼-inch steel plate. This short version shows the full process, including cutting the steel, drilling the mounting holes, deburring and grinding the edges, clamping the dollies in position, and bolting the reinforcement plates into place. The finished plates help distribute the load across the caster mounting areas and create a much stronger setup for moving heavy equipment around the shop. All tools used are available from @toolstoday, check them out on our site!
--
FEIN VersaMAG Vise 160 L Magnetic Vise
toolstoday.com/fein-99100001357-versamag-vise-160-l-magnetic-vise-with-jaw-opening-of-6-1-4-and-width-of-6.html
FEIN 31-1/2 inch Guide Rail for Hand Circular Saws
toolstoday.com/fein-31-1-2-inch-guide-rail-for-hand-circular-saws
FEIN F-IRON Cut 57 AS 18V Kit-Compact 6 Inch Circular Saw for Metal
toolstoday.com/fein-71360462090-f-iron-cut-57-as-18v-kit-compact-6-inch-circular-saw-for-metal.html
FEIN ASCM 18-4 QM AS 4-Speed 18V Cordless Drill/Driver
toolstoday.com/fein-71161561090-ascm-18-4-qm-as-4-speed-18v-cordless-drill-driver-bare-tool.html
FEIN PROTAGO CCG18-125-10 PD-SEC AS 5 Inch Cordless Angle Grinder
toolstoday.com/fein-71220561090-protago-ccg18-125-10-pd-sec-as-5-inch-cordless-angle-grinder.html
JET JDP-20S 20" Smart Drill Press
toolstoday.com/jet-jdp-20s-20-smart-drill-press.html
Sjobergs Elite 2000 Workbench Combo with SM04 Cabinet and Elite Accessories Kit
toolstoday.com/sjobergs-sjo-99402k-elite-2000-workbench-combo-with-sm04-cabinet-and-elite-accessories-kit.html
Reinforcing Heavy Duty Wheel Dollies with ¼ Inch SteelFlush Trimming Thick OakBuilding the Ultimate Woodworking WorkbenchEasy to Make Juice Groove Jig for Cutting BoardsCutting the First Steel Plate for Wheel Dolly ReinforcementMaking a Laser Cut Template for a CNC Cut PartPortable Logo Engraving ToolRouting Perfect Fitting Stile and Rail Joint #woodworkingCutting an Ogee Fillet Profile on the Router TableYou’re Probably Using the Wrong RPM When DrillingSmall Details That Make This Pencil Holder BetterRouting Grooves with Track for C Channel
ToolsToday |

Reinforcing Heavy Duty Wheel Dollies with ¼ Inch Steel

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER