Uploaded December 2025 | Updated September 2026, 1 hour ago

---

After a (overheard) request, I built a pair of Combinators for Reason 13. The aim was to make track and bus warmers for a bit of Tape feel using ONLY stock Reason devices. This is Reason, but the same will work in any decent DAW so long as you use 'clean' devices with the right understanding.

Download: ko-fi.com/s/52fd564938
Hire Me: benedictroffmarsh.com
- - -
Reason Tape Mixing Combis
00:00:00 Intro
00:01:53 Installation & Support
00:02:56 Use in a Mix
00:03:02 Track
00:05:05 Bus/Master
00:06:10 Using a Compressor
00:15:21 Internal Devices
00:16:09 Levels & Comp Position
00:18:38 Tape
00:23:03 Compressor
00:24:05 EQ
00:25:36 Limit/Clip
00:27:48 Conclusion