Uploaded October 2026 | Updated November 2026, 5 days ago
Most of the box fans you can buy today aren't very good. Some are a decent value considering how inexpensive they are, but they objectively leave a lot to be desired.
Many models such as the Lasko lineup haven't changed much in the last 2+ decades. Similar blades, similar motors, similar, guards, etc.. They seem to perform worse and worse every year as manufacturing costs are cut more and more. It really shouldn't be difficult to build a good fan at this point, these companies are just opting not to. Many of them like Lasko don't have to; the name is known, it has a market monopoly, the stuff is cheap, so it sells just because it exists.
I asked myself the question, "Can I build a better box fan than most of what's on the market today just using random scrap parts I have around the shop?", and unfortunately for what's on the market today, the answer was yes.
I combined a blade set that I bought many years ago for experimentation with a motor out of a busted air filter and put it into an old box fan frame that another collector used for parts. To little surprise, we came up with a build that's substantially better in most all respects than the majority of the models you can buy today.
This is an objectively very good box fan, aside from obvious physical issues like the potential to tilt backwards on high. It makes a reasonable amount of noise for the air moved, it doesn't use a lot of power, the air carries well, and it has a good range in speeds making the use cases very versatile.
I'm not sure what speed this blade is designed for, but it does seem like we're exceeding where it works best at. There appears to be a point of diminishing returns where the distance the air pushed increases very little for much higher RPMs, power consumption, noise, and reduction in efficiency.
With a few issues aside, I'd consider this a generally decent fan. It's quite abysmal that we could cobble something together with mis-matched parts from various sources and come up with something superior to most of what's mass produced today. The current box fan market is really in quite a sad state of existence...
The specifications measured during the video are as followed, represented as [Loudness (dBA) / Power (watts) / Current (amps) / Air Movement Volume (CFM) / Efficiency (CFM/watt) / Air Flow Velocity in MPH at 0' / 5' / 10'].
Low: [46 / 41 / 0.34 / 1,073 / 26 / 9 / 6 / 4].
Medium: [56 / 65 / 0.55 / 1,432 / 22 / 12.5 / 7 / 5].
High: [61 / 118 / 0.98 / 1,764 / 15 / 15 / 9 / 6].
Most of the box fans you can buy today aren't very good. Some are a decent value considering how inexpensive they are, but they objectively leave a lot to be desired.
Many models such as the Lasko lineup haven't changed much in the last 2+ decades. Similar blades, similar motors, similar, guards, etc.. They seem to perform worse and worse every year as manufacturing costs are cut more and more. It really shouldn't be difficult to build a good fan at this point, these companies are just opting not to. Many of them like Lasko don't have to; the name is known, it has a market monopoly, the stuff is cheap, so it sells just because it exists.
I asked myself the question, "Can I build a better box fan than most of what's on the market today just using random scrap parts I have around the shop?", and unfortunately for what's on the market today, the answer was yes.
I combined a blade set that I bought many years ago for experimentation with a motor out of a busted air filter and put it into an old box fan frame that another collector used for parts. To little surprise, we came up with a build that's substantially better in most all respects than the majority of the models you can buy today.
This is an objectively very good box fan, aside from obvious physical issues like the potential to tilt backwards on high. It makes a reasonable amount of noise for the air moved, it doesn't use a lot of power, the air carries well, and it has a good range in speeds making the use cases very versatile.
I'm not sure what speed this blade is designed for, but it does seem like we're exceeding where it works best at. There appears to be a point of diminishing returns where the distance the air pushed increases very little for much higher RPMs, power consumption, noise, and reduction in efficiency.
With a few issues aside, I'd consider this a generally decent fan. It's quite abysmal that we could cobble something together with mis-matched parts from various sources and come up with something superior to most of what's mass produced today. The current box fan market is really in quite a sad state of existence...
The specifications measured during the video are as followed, represented as [Loudness (dBA) / Power (watts) / Current (amps) / Air Movement Volume (CFM) / Efficiency (CFM/watt) / Air Flow Velocity in MPH at 0' / 5' / 10'].
Low: [46 / 41 / 0.34 / 1,073 / 26 / 9 / 6 / 4].
Medium: [56 / 65 / 0.55 / 1,432 / 22 / 12.5 / 7 / 5].
High: [61 / 118 / 0.98 / 1,764 / 15 / 15 / 9 / 6].










![Lasko 2526 16 Oscillating Pedestal Fan
My review of the Lasko 2526 16 oscillating stand/pedestal fan.
I bought this new back in 2017, along with an 18 Cyclone stand fan. A lot of viewers seemed to like this model, but I was generally unimpressed with it. I figured we should revisit it to see if my opinion would change if we assess it in a larger area and add some metrics to compare.
The performance is generally better than I remembered it being. The noise level, while I dont like the tone of it, is pretty reasonable, especially compared to the Cyclone models. It moves a decent amount of air that can be felt 15+ feet away from the unit. I like the basic mechanical controls and that this is a simple, traditional model thats been on the market for a while.
The assembly process leaves a lot to be desired; the front guard is very difficult to put on and seems to pop off relatively easily. Theres little variance in the speeds, so while none of them are particularly loud, you dont get a good control in the amount of air moved. The blade is totally out of clock and balance, which is very typical for Lasko fans.
Id overall consider this completely satisfactory for something on todays market, but where it fails is the price point. This was about $30 when I bought it in 2017, as of this taping in the latter portion of 2026, its about $50. There are still a good number of stand fans you can get in the $25-30 range. I think thats where this one belongs.
Lasko fans are generally average in my opinion. What makes them attractive is the low price I often consider them a good value. Plenty of the models are loud and leave something to be desired, but they last a long time and when you consider the price, theres little complaints to be had. I dont feel this is a very good value, I think there are much cheaper options you can get that will perform about the same. Will this one last longer than others? Perhaps, only time will tell.
The specifications measured in this video are as follows, represented as [Noise (dB) / Power (watts) / Current (amps) / Power Factor / Air flow volume (CFM) / Efficiency (CFM/watt) / Velocity (MPH) Close / Velocity (MPH) 5 Away / Velocity (MPH) 10 Away].
Low: 49 / 47 / 0.44 / 0.88 / 874 / 18.6 / 9.6 / 5.5 / 4.
Medium: 54 / 57 / .49 / .94 / 849 / 14.9 / 10.7 / 6.5 / 5.
High: 55 / 69 / 0.58 / 0.99 / 902 / 13.1 / 10.5 / 7.6 / 5.3. Lasko 2526 16 Oscillating Pedestal Fan](https://i.ytimg.com/vi/MXg9EtKNLc8/mqdefault.jpg)