Uploaded November 2026 | Updated November 2026, 19 hours ago
My review of the Lasko 2526 16" oscillating stand/pedestal fan.
I bought this new back in 2017, along with an 18" Cyclone stand fan. A lot of viewers seemed to like this model, but I was generally unimpressed with it. I figured we should revisit it to see if my opinion would change if we assess it in a larger area and add some metrics to compare.
The performance is generally better than I remembered it being. The noise level, while I don't like the tone of it, is pretty reasonable, especially compared to the Cyclone models. It moves a decent amount of air that can be felt 15+ feet away from the unit. I like the basic mechanical controls and that this is a simple, traditional model that's been on the market for a while.
The assembly process leaves a lot to be desired; the front guard is very difficult to put on and seems to pop off relatively easily. There's little variance in the speeds, so while none of them are particularly loud, you don't get a good control in the amount of air moved. The blade is totally out of clock and balance, which is very typical for Lasko fans.
I'd overall consider this completely satisfactory for something on today's market, but where it fails is the price point. This was about $30 when I bought it in 2017, as of this taping in the latter portion of 2026, it's about $50. There are still a good number of stand fans you can get in the $25-30 range. I think that's where this one belongs.
Lasko fans are generally average in my opinion. What makes them attractive is the low price -- I often consider them a good value. Plenty of the models are loud and leave something to be desired, but they last a long time and when you consider the price, there's little complaints to be had. I don't feel this is a very good value, I think there are much cheaper options you can get that will perform about the same. Will this one last longer than others? Perhaps, only time will tell.
The specifications measured in this video are as follows, represented as [Noise (dB) / Power (watts) / Current (amps) / Power Factor / Air flow volume (CFM) / Efficiency (CFM/watt) / Velocity (MPH) Close / Velocity (MPH) 5' Away / Velocity (MPH) 10' Away].
Low: 49 / 47 / 0.44 / 0.88 / 874 / 18.6 / 9.6 / 5.5 / 4.
Medium: 54 / 57 / .49 / .94 / 849 / 14.9 / 10.7 / 6.5 / 5.
High: 55 / 69 / 0.58 / 0.99 / 902 / 13.1 / 10.5 / 7.6 / 5.3.
My review of the Lasko 2526 16" oscillating stand/pedestal fan.
I bought this new back in 2017, along with an 18" Cyclone stand fan. A lot of viewers seemed to like this model, but I was generally unimpressed with it. I figured we should revisit it to see if my opinion would change if we assess it in a larger area and add some metrics to compare.
The performance is generally better than I remembered it being. The noise level, while I don't like the tone of it, is pretty reasonable, especially compared to the Cyclone models. It moves a decent amount of air that can be felt 15+ feet away from the unit. I like the basic mechanical controls and that this is a simple, traditional model that's been on the market for a while.
The assembly process leaves a lot to be desired; the front guard is very difficult to put on and seems to pop off relatively easily. There's little variance in the speeds, so while none of them are particularly loud, you don't get a good control in the amount of air moved. The blade is totally out of clock and balance, which is very typical for Lasko fans.
I'd overall consider this completely satisfactory for something on today's market, but where it fails is the price point. This was about $30 when I bought it in 2017, as of this taping in the latter portion of 2026, it's about $50. There are still a good number of stand fans you can get in the $25-30 range. I think that's where this one belongs.
Lasko fans are generally average in my opinion. What makes them attractive is the low price -- I often consider them a good value. Plenty of the models are loud and leave something to be desired, but they last a long time and when you consider the price, there's little complaints to be had. I don't feel this is a very good value, I think there are much cheaper options you can get that will perform about the same. Will this one last longer than others? Perhaps, only time will tell.
The specifications measured in this video are as follows, represented as [Noise (dB) / Power (watts) / Current (amps) / Power Factor / Air flow volume (CFM) / Efficiency (CFM/watt) / Velocity (MPH) Close / Velocity (MPH) 5' Away / Velocity (MPH) 10' Away].
Low: 49 / 47 / 0.44 / 0.88 / 874 / 18.6 / 9.6 / 5.5 / 4.
Medium: 54 / 57 / .49 / .94 / 849 / 14.9 / 10.7 / 6.5 / 5.
High: 55 / 69 / 0.58 / 0.99 / 902 / 13.1 / 10.5 / 7.6 / 5.3.






![Lasko H20301 20 Max Performance High Velocity Fan Review
My review of the Lasko 20 Max Performance High Velocity Fan model H20301. Note that there are numerous versions of this fan under different model numbers; the commentary here is applicable to model H20301 and may or may not be relevant to the others.
I have mixed feelings about a lot of Lasko products, but I generally consider them to be a good value. The price is low enough and the performance is decent enough to offset some of the QC and manufacturing tolerance issues present in many Lasko builds.
This unit is very average to me. It moves a decent amount of air, but isnt particularly strong. Its not obnoxiously loud, but it certainly isnt quiet. The physical form factor is decent, it sits sturdy on the base, isnt too heavy, and is easy to take apart for cleaning. The motor doesnt have oil ports like it should, but its easy enough to disassemble to refill the oil wicks. I like the controls on the front of the fan as opposed to the back near the motor. Surprisingly, the blade is in reasonable balance. This is rare for Lasko, I assume this is a fluke and the majority are totally out of balance.
Where the unit really fails is speed selection. This has 3 speeds, but each of the speeds hardly has any difference. Theres less than a 300 CFM difference between low and high, and only about 1 MPH difference between each speed. Consequently theres also little noise difference; its more so just a change in pitch than loudness.
If this had a good selection of speeds to the point where Low is about half of high, this would be quiet and tame enough for use in a bedroom, kitchen, small living room, or other similar living spaces. As it is without speeds, I really wouldnt want to use it much of anywhere beyond the garage. The low speed is tolerable in the large living room during the day when the windows are open and other background noise is present, but even at night when its quiet, its a bit too much in there. This can be solved by running the fan on a variac to create whatever speeds youd like, but one shouldnt have to... Of course theres the argument that this is a high velocity fan and performs accordingly, but it still would have been nice to be able to slow it down like the old Patton units from the 90s. It would make the fan much more versatile.
The blade, as with many of the other blades Lasko currently uses, is not very good from an aerodynamics perspective. The tips of the blades dont move any air; theres only about 17 of air moving surface despite the blade being almost 20 across. The blade itself isnt quite 20, and the whole width of the fan is far more than 20, so I have no idea where the 20 even comes from. There are far superior blade designs available that would move more air with less noise.
In conclusion, I think this is an OK fan, but it shouldnt be as expensive as it is. Theres a surprisingly wide range of high velocity fans currently available on the market of all product tiers, ranging from about $50 on the low end to upwards of $200 on the high end. Aside from potential longevity (which only time will tell), Im not seeing what puts this ahead of the $50 models and find it hard to consider this one to be a good value. I tend to think, like a lot of other Lasko products, that this sells simply because it exists and people are aware of the brand, not because its objectively better than other models or because its a particularly good value.
The specifications captured during the video are as follows, represented respectively [Airflow (CFM) / Efficiency (CFM/watt) / Power (watts) / Current (amps) / Loudness (dBA) / Wind speed (MPH) at 0 / 5 / 10]:
Low: [1,918 / 19 / 100 / 0.87 / 61 / 15.5 / 8 / 5].
Medium: [2,095 / 19 / 109 / 0.96 / 62 / 16 / 9 / 5].
High: [2,184 / 17 / 126 / 1.09 / 64 / 17 / 9 / 6]. Lasko H20301 20 Max Performance High Velocity Fan Review](https://i.ytimg.com/vi/QRAtf4oNd68/mqdefault.jpg)



