Uploaded October 2026 | Updated November 2026, 2 days ago
Testing a different blade on a LASKO 3733 box fan. Surprisingly this blade did not have much of an impact on the performance, the air flow was about the same from both blades.
This black blade puts a fair bit more drag on the motor, resulting in lower speed. It's much better aerodynamically; it was pushing about the same amount of air with a fraction of the noise and slower speed.
Testing a different blade on a LASKO 3733 box fan. Surprisingly this blade did not have much of an impact on the performance, the air flow was about the same from both blades.
This black blade puts a fair bit more drag on the motor, resulting in lower speed. It's much better aerodynamically; it was pushing about the same amount of air with a fraction of the noise and slower speed.







![Lasko 2526 16 Oscillating Pedestal Fan
My review of the Lasko 2526 16 oscillating stand/pedestal fan.
I bought this new back in 2017, along with an 18 Cyclone stand fan. A lot of viewers seemed to like this model, but I was generally unimpressed with it. I figured we should revisit it to see if my opinion would change if we assess it in a larger area and add some metrics to compare.
The performance is generally better than I remembered it being. The noise level, while I dont like the tone of it, is pretty reasonable, especially compared to the Cyclone models. It moves a decent amount of air that can be felt 15+ feet away from the unit. I like the basic mechanical controls and that this is a simple, traditional model thats been on the market for a while.
The assembly process leaves a lot to be desired; the front guard is very difficult to put on and seems to pop off relatively easily. Theres little variance in the speeds, so while none of them are particularly loud, you dont get a good control in the amount of air moved. The blade is totally out of clock and balance, which is very typical for Lasko fans.
Id overall consider this completely satisfactory for something on todays market, but where it fails is the price point. This was about $30 when I bought it in 2017, as of this taping in the latter portion of 2026, its about $50. There are still a good number of stand fans you can get in the $25-30 range. I think thats where this one belongs.
Lasko fans are generally average in my opinion. What makes them attractive is the low price I often consider them a good value. Plenty of the models are loud and leave something to be desired, but they last a long time and when you consider the price, theres little complaints to be had. I dont feel this is a very good value, I think there are much cheaper options you can get that will perform about the same. Will this one last longer than others? Perhaps, only time will tell.
The specifications measured in this video are as follows, represented as [Noise (dB) / Power (watts) / Current (amps) / Power Factor / Air flow volume (CFM) / Efficiency (CFM/watt) / Velocity (MPH) Close / Velocity (MPH) 5 Away / Velocity (MPH) 10 Away].
Low: 49 / 47 / 0.44 / 0.88 / 874 / 18.6 / 9.6 / 5.5 / 4.
Medium: 54 / 57 / .49 / .94 / 849 / 14.9 / 10.7 / 6.5 / 5.
High: 55 / 69 / 0.58 / 0.99 / 902 / 13.1 / 10.5 / 7.6 / 5.3. Lasko 2526 16 Oscillating Pedestal Fan](https://i.ytimg.com/vi/MXg9EtKNLc8/mqdefault.jpg)


