Woodpeckers | Protect your projects from contact stains and dents from rough clamping with Clamp-Pals! @WoodpeckersLLC | Uploaded July 2024 | Updated October 2024, 22 minutes ago.
Woodpeckers new Clamp-Pals protect your projects from glue contact stains and dents from rough clamping heads at the same time. The resilient injection-molded right-angle pads keep your workpiece isolated from both the bar and the clamp head. Clamp-Pals work with 1/2” and 3/4” pipe clamps as well as parallel jaw clamps.
Just drop Clamp-Pals on the edge of your stock and clamp with confidence. Clamp-Pals protect your project in three ways. They provide a barrier between your workpiece and the pipe or bar...so no rust, scale, or mill varnish can stain it. The opposing side provides a smooth clamping surface that won’t deform the wood like a cast iron clamp head can. And, the hollow recess in the corner of each Clamp-Pal prevents damage to delicate miters and carefully machined edges.
Clamp-Pals protect both the face and edge of your stock on every step of your project and using them couldn’t be simpler. Just place a couple Clamp-Pals where you your clamp is going and then position your clamp. The two faces have different radius profiles to closely match both 1/2” and 3/4” pipe.
Best of all, Clamp-Pals work with most clamps.
The square corner of a Clamp-Pal registers on the corner of your work. It doesn’t attach to the clamp so it doesn’t matter whether it’s a 60-year-old hand-me-down pipe clamp or a brand-new parallel jaw clamp, the Clamp-Pal is going to fit, prevent staining and distribute the clamping pressure evenly.
To learn more or to take advantage of the introductory pricing, copy and paste the link below in your web browser!
woodpeck.com/clamp-pal.html
Tools Used:
1️⃣ Clamp-Pal Set - 12 pc
SKU: CP-24
2️⃣ Clamp-Pal Set - 24 pc
SKU: CP-24X2
Woodpeckers new Clamp-Pals protect your projects from glue contact stains and dents from rough clamping heads at the same time. The resilient injection-molded right-angle pads keep your workpiece isolated from both the bar and the clamp head. Clamp-Pals work with 1/2” and 3/4” pipe clamps as well as parallel jaw clamps.
Just drop Clamp-Pals on the edge of your stock and clamp with confidence. Clamp-Pals protect your project in three ways. They provide a barrier between your workpiece and the pipe or bar...so no rust, scale, or mill varnish can stain it. The opposing side provides a smooth clamping surface that won’t deform the wood like a cast iron clamp head can. And, the hollow recess in the corner of each Clamp-Pal prevents damage to delicate miters and carefully machined edges.
Clamp-Pals protect both the face and edge of your stock on every step of your project and using them couldn’t be simpler. Just place a couple Clamp-Pals where you your clamp is going and then position your clamp. The two faces have different radius profiles to closely match both 1/2” and 3/4” pipe.
Best of all, Clamp-Pals work with most clamps.
The square corner of a Clamp-Pal registers on the corner of your work. It doesn’t attach to the clamp so it doesn’t matter whether it’s a 60-year-old hand-me-down pipe clamp or a brand-new parallel jaw clamp, the Clamp-Pal is going to fit, prevent staining and distribute the clamping pressure evenly.
To learn more or to take advantage of the introductory pricing, copy and paste the link below in your web browser!
woodpeck.com/clamp-pal.html
Tools Used:
1️⃣ Clamp-Pal Set - 12 pc
SKU: CP-24
2️⃣ Clamp-Pal Set - 24 pc
SKU: CP-24X2
