Woodpeckers | Dial in your blade and bit heights to the perfect setting using the Adjustable Setup Block @WoodpeckersLLC | Uploaded September 2024 | Updated October 2024, 2 hours ago.
An Adjustable Setup Block!? 🤯
A physical reference representing your critical dimension leads to more accurate machine set-ups than trying to adjust to a scale. Lots of woodworkers use sets of blocks for this task, but Woodpeckers Adjustable Setup Block, is one single device that adjusts to any dimension between 1/64” to 1-3/16”. Just use the easy-to-read scale to position the reference surface and dial in your cutter height or fence position. Use your sense of sight and touch to deliver the perfect settings.
The “TOP” scale measures the distance from the bottom of the base to the top of the reference plate.
You can use that to set the distance between the bottom of a drill bit and table of your drill press. The
“BOTTOM” scale measures the distance from the bottom of the base to the bottom face of the reference plate. It’s perfect for adjusting the height of a bit in your router table or the depth of cut on your table saw. The reference plate extends away from the body of the tool, giving you lots of alignment options.
The Adjustable Setup Block is also available in a metric version. The top and bottom scales give you a range from .5mm up to 28mm. The scales are graduated in .5mm increments and held to the same strict tolerance as the inch scales.
To learn more about the Adjustable Setup Block, visit our website at woodpeck.com or copy and paste the link below in your web browser!
woodpeck.com/adjustable-setup-block.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=ADJSU-09-2024
Tools Used:
1️⃣ Adjustable Setup Block - INCH
SKU: ADJSU-I-23
2️⃣ Adjustable Setup Block - METRIC
SKU: ADJSU-M-23
#woodworking #woodpeckerstools #woodworkingtools #woodworkingcommunity #woodworkingskills #toolsofthetrade #ohiobusiness #maker #makersgonnamake
An Adjustable Setup Block!? 🤯
A physical reference representing your critical dimension leads to more accurate machine set-ups than trying to adjust to a scale. Lots of woodworkers use sets of blocks for this task, but Woodpeckers Adjustable Setup Block, is one single device that adjusts to any dimension between 1/64” to 1-3/16”. Just use the easy-to-read scale to position the reference surface and dial in your cutter height or fence position. Use your sense of sight and touch to deliver the perfect settings.
The “TOP” scale measures the distance from the bottom of the base to the top of the reference plate.
You can use that to set the distance between the bottom of a drill bit and table of your drill press. The
“BOTTOM” scale measures the distance from the bottom of the base to the bottom face of the reference plate. It’s perfect for adjusting the height of a bit in your router table or the depth of cut on your table saw. The reference plate extends away from the body of the tool, giving you lots of alignment options.
The Adjustable Setup Block is also available in a metric version. The top and bottom scales give you a range from .5mm up to 28mm. The scales are graduated in .5mm increments and held to the same strict tolerance as the inch scales.
To learn more about the Adjustable Setup Block, visit our website at woodpeck.com or copy and paste the link below in your web browser!
woodpeck.com/adjustable-setup-block.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=ADJSU-09-2024
Tools Used:
1️⃣ Adjustable Setup Block - INCH
SKU: ADJSU-I-23
2️⃣ Adjustable Setup Block - METRIC
SKU: ADJSU-M-23
#woodworking #woodpeckerstools #woodworkingtools #woodworkingcommunity #woodworkingskills #toolsofthetrade #ohiobusiness #maker #makersgonnamake