Programming a Lexus Smart Key with DG Technologies - VSI NXGen Plus J2534 and Toyota GTS+ @ThePracticalMechanic
Programming a Lexus Smart Key with DG Technologies - VSI NXGen Plus J2534 and Toyota GTS+  @ThePracticalMechanic
Uploaded May 2026 | Updated November 2026, 3 hours ago
In this video, I use the DG Technologies VSI NxGen Plus J2534 / DoIP interface to program a smart key on a 2022 Lexus RX450h using the OEM Toyota/Lexus GTS+ software.

One of the advantages of using the OEM Toyota software is that it helps simplify and automate the vehicle security access process. Instead of manually handling the incode/outcode or password process separately, GTS+ helps streamline the workflow when used with the proper Toyota/Lexus security access.

Using an aftermarket J2534 device like the VSI NxGen Plus can be a cost-effective option compared to some factory interface options, while still allowing access to OEM-level programming functions when paired with the proper software subscription.

This process does still require proper authorization. Toyota/Lexus security passcodes require a valid NASTF VSP credential to obtain passcodes for immobilizer and key programming functions.

Vehicle:
2022 Lexus RX450h

Tool / Interface:
DG Technologies VSI NxGen Plus J2534 / DoIP

Software:
Toyota/Lexus GTS+

Security Access:
NASTF VSP credential required for Toyota/Lexus passcodes

DG Technologies VSI NxGen Plus product information:
dgtech.com/vsi-nxgen-plus

Affiliate Disclosure:
Some links below are affiliate links. If you purchase through these links, I may earn a commission at no additional cost to you.

Mitchell1 / eAutoRepair repair information:
https://eautorepair.adtrk.biz/?a=10863&c=10032&p=r&s1=

This video is intended for automotive technicians, locksmiths, mobile programmers, and diagnostic professionals interested in OEM Toyota/Lexus key programming using J2534 equipment.

#J2534 #NXGenPlus #DGTech #ToyotaGTS #LexusProgramming #KeyProgramming #NASTFVSP #AutomotiveDiagnostics #ThePracticalMechanic
Programming a Lexus Smart Key with DG Technologies - VSI NXGen Plus J2534 and Toyota GTS+Live Diagnostics - Ford Ecoboost Misfire under loadWeekly waveform 2 recap and review. New accessories for next week.Ford 6 7l Injector IQA procedure using the Launch Diagun2005 Subaru Forester Pt 2 Engine removal2004 Chevrolet 2500HD 6.6 Duramax LB7 rough idle - case studyWeekly Waveform 21 - Testing Oxygen Sensor Signal and Heater CircuitswiTECH 2.0 - Will it work with Launch Smart link j2534 device?2008 Chevrolet Trailblazer P0449 Diagnostic and repairPolarity reversing switch for motor and actuator control - adding banana jacks LiveHow to Optimize Your Inventory by looking at Your Item Movement - NAPATracs Enterprise SMS2010 Ford stuck in low range quick Diag
ThePracticalMechanic |

Programming a Lexus Smart Key with DG Technologies - VSI NXGen Plus J2534 and Toyota GTS+

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER