Pro level reamping on a budget? (Palmer TRAVE) @paulbradshawguitar

Pro level reamping on a budget? (Palmer TRAVE) @paulbradshawguitar

Uploaded September 2024 | Updated September 2026, 2 weeks ago

Palmer Trave
thmn.to/thoprod/549849?offid=1&affid=3523

Here's my review of the Palmer Trave reamp box, a really great passive device for reamping your favourite guitar tones into pedals/tube amps/amp, you name it

**edit : Quick correction, I was actually sending out +4db from my Interface and +4db was selected on the Palmer, the levelling process i did remains the same

In case anyone is wondering I bought this with my own money to try, and it's staying =)

Palmer Trave :
palmer-germany.com/en/products/di-boxes/26882/river-trave

there's quite a few options out there, but thought I'd try this one out and for the price i think it does a really good job

lots of nerdy comparisons with DI/guitar signals, amp and more
this is all done with further Neural Amp Model capturing in mind

-- -- --
►►► All my Fractal audio presets 🎸: ko-fi.com/s/5a6542f393

►►► Buy me a coffee ☕: ko-fi.com/paulbradshawguitar

►►► All my links 🎧: https://linktr.ee/paulbradshawguitar
-- -- --
TIME STAMPS
00:00 Intro
00:12 Specs
00:35 Setup
01:09 Test 1 : DI vs Reamp'd DI
02:19 Why these tests?
02:42 Testing Guitar vs Palmer into the amp
03:36 Impedance differences and using buffers/pedals
04:14 Test 3 - Guitar & Pedal vs Reamp & pedal
05:20 Final thoughts

✨Lights
FGEN Softbox set : amzn.to/4dL5QOA
Ambitful A1 : amzn.to/4dHqn6B
Raleno Video Light: amzn.to/4dJ5V5n
Phillips Hue: amzn.to/4f3NCcd
📸 Cameras
Sony ZV-1 : amzn.to/4dHqn6B
DJI Osmo Pocket 3 : amzn.to/4eI856G

💡Accessories:
Table camera stand : amzn.to/3BFDwjg
Camera Table mount: amzn.to/3NlWpdQ

#reamp #guitar #recording

Pro level reamping on a budget? (Palmer TRAVE)

MXR Rockman x100 - Only Tones (no talking)

$Secret Weapon: Scene Controllers - Fractal Axe Fx3 / FM9 / FM3 Heres a look at Scene controllers , what they are and how you can use them For me I find them particularly useful for say morphing reverbs between two different tones, given that on the FM3 (a mark1 in my case) its limited to one reverb block This was done on the latest official firmware 10 follow me on IG here : https://instagram.com/paulbradshawguitar/ Support me by using any of these links: ►Thomann Affiliate🔊: https://www.thomann.de/de/index.html?offid=1&affid=3523 ►Gear I Use 🔊: https://thmn.to/thocf/fi5qa1i74l ►All my Fractal audio presets 🎸: https://ko-fi.com/s/5a6542f393 ►Buy me a coffee / NAM + TONEX packs ☕: https://ko-fi.com/paulbradshawguitar ►All my links 🎧: https://linktr.ee/paulbradshawguitar ✨Lights GVM : https://bit.ly/3OP5BYI GVM SD200b/softbox - https://bit.ly/4gbw9zK Enter the code Paulgvm to get 10% off your order there. TIME STAMPS 00:00 Intro 00:32 What is a scene controller? 01:34 Lets make a simple preset 03:20 What can scene controllers control? setting it up 07:08 Scene controller(s) on the Reverb block 07:50 The issue when changing Reverb Channels in the Reverb block 08:38 A fix for this 09:10 Setting scene controllers on the reverb block 09:37 Adding vibe to the scene controller / parameter range and attack / release 13:19 Quick note on attack and release 15:20 Quick recap of the Scene controllers setup 16:35 Hearing it in action 17:22 Final thoughts #fractalaudio$ $The IDEAL backup for my Fractal FM3? : Tonex ONE Heres how I use the Tonex One as a backup rig for my Fractal FM3 I cant really afford/warrant a second FM3 as a backup rig, so whats a good option in a pinch that can fit in my gigbag? Tonex One - affiliate link: https://thmn.to/thoprod/586125?offid=1&affid=3523 The IK Multimedia Tonex ONE especially with the new FX update, is quite a nice contender, given that you can capture your signal chain from the Fractal unit (complete with Multiband compressor, EQing etc...) so youll have the same tone on the go There are some limitations and things to bear in mind, but thought Id share this in case its useful for some of you out there, this applies to my use case scenario, we all have different setups, but given how dialed in digital rigs are these days, its great to have an option that has the same tone, should anything go wrong Guitar is an Ibanez RGDIX6PB with Evertune retrofit, Häussel Vin + ceramic pickup in the bridge ►►► Thomann Affiliate🔊: https://www.thomann.de/intl/thlpg_fi5qa1i74l.html ►►► All my Fractal audio presets 🎸: https://ko-fi.com/s/5a6542f393 ►►► Buy me a coffee ☕: https://ko-fi.com/paulbradshawguitar ►►► All my links 🎧: https://linktr.ee/paulbradshawguitar ✨Lights FGEN Softbox set : https://amzn.to/4dL5QOA Ambitful A1 : https://amzn.to/4dHqn6B Raleno Video Light: https://amzn.to/4dJ5V5n Phillips Hue: https://amzn.to/4f3NCcd 📸 Cameras Sony ZV-1 : https://amzn.to/4dHqn6B DJI Osmo Pocket 3 : https://amzn.to/4eI856G 💡Accessories: Table camera stand : https://amzn.to/3BFDwjg Camera Table mount: https://amzn.to/3NlWpdQ TIME STAMPS 00:00 Intro 00:23 Fractal FM3 preset setup 01:36 TONE Fractal FM3 vs Tonex 02:01 Limitations 02:24 TONE switching / no spillover , slight audio gap 02:37 Extra bits and pieces 03:13 TONE Tonex vs Fractal FM3 03:41 Functionality + Midi concerns 04:31 Thanks for watching #fractalaudio #tonex$ $Dreamy / ambient - Blue Skies Preset - Fractal FM3 / FM9 / AXE FX 3 Heres something i put together while programming new patches with the new firmware, it was the cleanish scene from my main preset with Drogher sorry for some of the audio clicks, for some reason it did that during the recording, didnt catch it until after the upload i was dialing things in for firmware 8 for my new preset for Drogher , we have like 2-3 cleanish passages, thanks to gapless on the FM3 i can switch amps properly now =) I liked the sound of the Euro Blue model for an edge of breakup clean with humbuckers, had a nice response to picking attack and as i was experimenting with the Euro Uber model for distortion, seemed like a good match in essence the magic is using two delays , a DMM style delay @ 1/4 dot before the amp , and then a stereo tape @ 1/4 after the amp you get this cascading/bouncy sort of feel which is great, and the first analog style repeats into the front of the amp get a bit of saturation/hair depending on how you pick put some other bits and pieces in there if you want to solo over/loop etc.. preset attached here, or otherwise within my downloads download below, thanks for checking it out ►►► All my Fractal audio presets 🎸: https://ko-fi.com/s/5a6542f393 ►►► Buy me a coffee ☕: https://ko-fi.com/paulbradshawguitar ►►► All my links 🎧: https://linktr.ee/paulbradshawguitar #guitar #guitarist #fractalaudio #tutorial #tutorials #walkthrough #tone #how #howto #ambient #postrock$ $Setting up a Momentary HOLD effect - Fractal AXE FX 3 / FM3 / FM9 Today were looking at control switches, how i use them in a certain way, and how we can use them creatively to not only recreate some pedal functionality such as the Digitech Ricochet, but also use it on other effects blocks, a very strong tool within the fractal unit You can specify the switch within FC-Edit with one of your own layouts, instead of doing FC Per Preset , you just select one of your usual switches to be Category : Control Switch Function : Momentary/Latching as you wish Control Switch : CS1 / 2/3/4/5 to your liking just bear in mind the HOLD functionality to keep that unassigned on that switch Leons excellent videos on control switches with G66: https://youtu.be/l1mVXQVyP9I https://www.youtube.com/watch?v=eLKNGiFBafE and otherwise Roshs excellent video on per preset switches below: Rosh: https://www.youtube.com/watch?v=JKndCClX8Dg ►►► All my Fractal audio presets 🎸: https://ko-fi.com/s/5a6542f393 ►►► Buy me a coffee ☕: https://ko-fi.com/paulbradshawguitar ►►► All my links 🎧: https://linktr.ee/paulbradshawguitar using my PRS S2 Standard Singlecut FM3 mark1 Firmware 7 TIME STAMPS 00:00 Intro 00:58 Control Switches 01:04 Preset build 02:16 Footswitch setup 05:10 Ricochet - 1 button whammy 10:57 One button WAH 13:10 Latching control switch demo 14:46 Delay block examples 19:14 Outro #guitar #guitarist #fractalaudio #metal #metalguitar #tutorial #tutorials #walkthrough #tone #how #howto #digitech #prs$

Aviator Guitars + Mayones Guitars : Guitar Summit 2025

one of my current favourite tones #strandbergguitars #marshallamplification #shorts #guitar

$Noise Gate setup for METAL : Fractal FM3 FM9 AXE FX3 Heres a walkthrough and setup of a super tight and aggressive noise gate within your Fractal audio FM3 / FM9 / Axe Fx 3 Ive gone through this in a previous video, give the questions ive seen on various videos and online thought Id do a separate video on setting up a noise gate more specifically for metal This is akin to setting up something like a Fortin Zuul, Lichtlaerm Key & the gate, within the Fractal unit The benefit of using a sidechain style gate means you can go nuts with distortion and gain while still maintaining a super tight gate ►►► Thomann Affiliate🔊: https://www.thomann.de/intl/thlpg_fi5qa1i74l.html ►►► All my Fractal audio presets 🎸: https://ko-fi.com/s/5a6542f393 ►►► Buy me a coffee ☕: https://ko-fi.com/paulbradshawguitar ►►► All my links 🎧: https://linktr.ee/paulbradshawguitar ✨Lights GVM SD200b/softbox - https://bit.ly/4gbw9zK Enter the code Paulgvm to get 10% off your order there. Quntis - Monitor light : https://amzn.to/3Zn62i7 Ambitful A1 : https://amzn.to/4dHqn6B Raleno Video Light: https://amzn.to/4dJ5V5n Phillips Hue: https://amzn.to/4f3NCcd 📸 Cameras Sony ZV-1 : https://amzn.to/4dHqn6B DJI Osmo Pocket 3 : https://amzn.to/4eI856G 💡Accessories: Table camera stand : https://amzn.to/3BFDwjg Camera Table mount: https://amzn.to/3NlWpdQ TIME STAMPS 00:00 Intro - basic preset setup 01:43 Input block noise gate 03:17 The potential issue with just the input noise gate 03:43 Sidechain style gate setup 08:21 TONE crazy gain and gating examples 09:47 Quick word on Lead playing and the gate 10:33 Thanks for watching #fractalaudio #metalguitar$

Is Extended or Optimized better for TONEX Captures?

Updating Tonex ONE to 1.8 - Finally with Effects!

Finally got to try one! - Schecter Nick Johnston HSS - Atomic snow

Paul Bradshaw |

Pro level reamping on a budget? (Palmer TRAVE)