Uploaded July 2020 | Updated November 2026, 1 day ago
This is the build for the optional enclosure for the Phaser kit.
A couple of notes:
- I forgot to mention putting on the 2 nylon spacers underneath the board you can see them at the right of the board at around 8:05
- I just realized you can use the two spare ribbon wires to attach the on/off switch to the board
This is the build for the optional enclosure for the Phaser kit.
A couple of notes:
- I forgot to mention putting on the 2 nylon spacers underneath the board you can see them at the right of the board at around 8:05
- I just realized you can use the two spare ribbon wires to attach the on/off switch to the board










