Uploaded March 2020 | Updated November 2026, 1 day ago
In this video I solder connections to the SDA and SCL lines on the SA818 board and show the resulting traffic on the scope. Then I use the I2CDriver
i2cdriver.com
To capture traffic between the uController and RDA1846. I also do a quick demo of the I2CDriver itself. The resulting traffic captured is here:
github.com/thaaraak/rda1846/blob/master/documents/c2.csv
I did try the Bus Pirate
dangerousprototypes.com/docs/Bus_Pirate
but I was unable to capture the traffic (potentially because the I2C bus is running at too high a frequency)
In this video I solder connections to the SDA and SCL lines on the SA818 board and show the resulting traffic on the scope. Then I use the I2CDriver
i2cdriver.com
To capture traffic between the uController and RDA1846. I also do a quick demo of the I2CDriver itself. The resulting traffic captured is here:
github.com/thaaraak/rda1846/blob/master/documents/c2.csv
I did try the Bus Pirate
dangerousprototypes.com/docs/Bus_Pirate
but I was unable to capture the traffic (potentially because the I2C bus is running at too high a frequency)










