Part 1. DIY Internal Combustion Engine Made from Old Compressor - Taking it Apart and Tools @makerj101
Part 1. DIY Internal Combustion Engine Made from Old Compressor - Taking it Apart and Tools  @makerj101
Uploaded June 2017 | Updated November 2026, 1 hour ago
I have always wondered if one could convert an old refrigeration compressor into an internal combustion engine. Here is the first video of a series where I try to attempt just that. In theory it should work quit well. The piston has no piston rings however it still has great compression because the surfaces appear to be ground and the tolerances are extremely tight.
I like putting constraints on my work. The main ones that I have put on this project are limited power tools. I will only use a battery drill, hacksaw, and other common hand tools and materials. Working with constraints are what real world engineers basically do and I find it challenging and fun working in this way. There are three reason for trying to do this with minimal tools: 1. so anyone, even someone in a third world country can replicate. 2. to show what you might be able to do in an apocalyptic situation. 3. creative thinking. I hope you enjoy. Please leave ideas and suggestions in the comments below! Ideas will help a lot with the project because I am doing this project live! So where I left off in the video is the current state of the project. I have no idea what obstructions I will encounter tomorrow when I turn on the camera and pick up the hacksaw. Thanks!

Instagram and Facebook for project updates, and pictures of casting, making, hacking, building, and more!
instagram.com/makerj101
facebook.com/makerj101

Keep exploramenting and thank you for watching!
Don't forget to subscribe for more! youtube.com/user/makerj101?sub_confirmation=1firmation=1
Part 1. DIY Internal Combustion Engine Made from Old Compressor - Taking it Apart and ToolsTaking Apart My New Stirling Engine #5 to Fix the Displacer (it melted)Free Energy Magnetic Resonator WorksTaking Apart My Stirling Engine #4 With Failed DisplacerHow To Identifying Aluminium, Zinc, and Other Metals For CastingUnboxing and First Impression of the Power + 8000 Air Rework Station 2 in 1 Soldering StationUnmodified AC Induction Motor Working as a Generator ExperimentExploring Old Abandoned Crane part 2 - Inside the Crane, Huge Winches and MotorHow to Make an Awesome Ring Out of a QuarterBuilding the Displacer Cylinder For My New Stirling Engine #5 - Part 2 of 2Running the Steam Engine at Higher Pressure with New Pressure Relief ValveUranium Glass - Woods Exploration Followup Using Geiger Counter and Ultraviolet Light
Makerj101 |

Part 1. DIY Internal Combustion Engine Made from Old Compressor - Taking it Apart and Tools

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER