Uploaded August 2024 | Updated September 2026, 2 weeks ago
The Fault
Lack of storage solutions available from factory options in commercial vehicles
Most commercial vehicles, van and camper conversions have limited storage solutions. They often come with the rear of the vehicle completely bare except from the MDF cladding on the inside of the shell.
Garages and workshops often end up messy and disoraganised due to garage storage and organisation solutions being pricey and bulky.
Our Solution
Install X8R’s universal XL caulk and gun holder in under 5 minutes for a simple storage solution.
X8R’s XL caulk and gun holder is the perfect solution for tradespeople such as plumbers, electricians, decorators etc. It holds up to 12 tubes, with the front right-most hole made slightly larger to accomodate a caulking gun (with or without the tube inside the gun).
The holder can be fitted using self-tapping screws for an easy installation (no power tools required, although you can use an electric drill if you wish) in under 5 minutes.
The bracket could also be wall-mounted such as in garages etc. Please ensure you use suitable wall plugs.
The bracket is made from 1.5mm thick black powder coated steel, a far superior material versus the inferior plastic other solutions which often break.
Compatibility
The bracket is compatible with all caulk, silicone, adhesive tubes etc with a diameter of 2 inches or less.
You Will Receive
1 x XL caulk/silicone bracket in powder coated steel
The Fault
Lack of storage solutions available from factory options in commercial vehicles
Most commercial vehicles, van and camper conversions have limited storage solutions. They often come with the rear of the vehicle completely bare except from the MDF cladding on the inside of the shell.
Garages and workshops often end up messy and disoraganised due to garage storage and organisation solutions being pricey and bulky.
Our Solution
Install X8R’s universal XL caulk and gun holder in under 5 minutes for a simple storage solution.
X8R’s XL caulk and gun holder is the perfect solution for tradespeople such as plumbers, electricians, decorators etc. It holds up to 12 tubes, with the front right-most hole made slightly larger to accomodate a caulking gun (with or without the tube inside the gun).
The holder can be fitted using self-tapping screws for an easy installation (no power tools required, although you can use an electric drill if you wish) in under 5 minutes.
The bracket could also be wall-mounted such as in garages etc. Please ensure you use suitable wall plugs.
The bracket is made from 1.5mm thick black powder coated steel, a far superior material versus the inferior plastic other solutions which often break.
Compatibility
The bracket is compatible with all caulk, silicone, adhesive tubes etc with a diameter of 2 inches or less.
You Will Receive
1 x XL caulk/silicone bracket in powder coated steel
