Uploaded August 2022 | Updated November 2026, 1 day ago
In this video, I am going to test out the HP t620 Plus Thin Client's performance with the Broadcom BCM57810s SFP+ 10GbE adapter. Let's find out if the HP T620P can handle 10Gbps throughput.
Eventhough the HP T620P has a Gen 2 PCIe x4 connector (in x16 form factor), I only get 4.9Gbps throughput with the CPU at 70% idle. During the test, the power consumption went up to 25W using the official HP power adapter with 220V AC - 50Hz.
Video timeframe:
00:00 - Intro
00:18 - Network Diagram Overview
00:57 - Hardware Overview
01:15 - The Dell QLogic BCM57810S Dual SFP+ Adapter
03:15 - Install Driver & Configure the 57810S Adapter (kmod-bnx2 & kmod-bnx2x)
09:46 - No Offloading - OpenSpeedTest
11:13 - No Offloading - iperf3
12:27 - SW Offloading - OpenSpeedTest
13:53 - SW Offloading - iperf3
15:12 - Testing with Packet Steering Enabled
16:08 - Final words
17:39 - Bonus - Power Consumption
Special thanks to shortbloke#8568 for your help in creating the 3D printing file. You can find the Low Profile Bracket for the 57810s Dual SFP+ adapter here printables.com/model/250772-dell-qlogic-57810s-dual-port-10gbps-sfp-card-low-p
- You can also check out my other OpenWRT 10Gbps Build with Mellanox Connectx-3 here youtu.be/6sfs6tvDkg4
- The 10Gb Broadcom BCM57810S NIC can be purchased at amzn.to/3UdJZ8V
- If you want the same model, here is the link to it amzn.to/3AZi3yO
- If you enjoy watching my videos and want to support me, please do it here. patreon.com/vantechcorner
Thanks for watching and see you all in the next video!
In this video, I am going to test out the HP t620 Plus Thin Client's performance with the Broadcom BCM57810s SFP+ 10GbE adapter. Let's find out if the HP T620P can handle 10Gbps throughput.
Eventhough the HP T620P has a Gen 2 PCIe x4 connector (in x16 form factor), I only get 4.9Gbps throughput with the CPU at 70% idle. During the test, the power consumption went up to 25W using the official HP power adapter with 220V AC - 50Hz.
Video timeframe:
00:00 - Intro
00:18 - Network Diagram Overview
00:57 - Hardware Overview
01:15 - The Dell QLogic BCM57810S Dual SFP+ Adapter
03:15 - Install Driver & Configure the 57810S Adapter (kmod-bnx2 & kmod-bnx2x)
09:46 - No Offloading - OpenSpeedTest
11:13 - No Offloading - iperf3
12:27 - SW Offloading - OpenSpeedTest
13:53 - SW Offloading - iperf3
15:12 - Testing with Packet Steering Enabled
16:08 - Final words
17:39 - Bonus - Power Consumption
Special thanks to shortbloke#8568 for your help in creating the 3D printing file. You can find the Low Profile Bracket for the 57810s Dual SFP+ adapter here printables.com/model/250772-dell-qlogic-57810s-dual-port-10gbps-sfp-card-low-p
- You can also check out my other OpenWRT 10Gbps Build with Mellanox Connectx-3 here youtu.be/6sfs6tvDkg4
- The 10Gb Broadcom BCM57810S NIC can be purchased at amzn.to/3UdJZ8V
- If you want the same model, here is the link to it amzn.to/3AZi3yO
- If you enjoy watching my videos and want to support me, please do it here. patreon.com/vantechcorner
Thanks for watching and see you all in the next video!










