Uploaded May 2021 | Updated November 2026, 1 day ago
In this video, we will set up AP Client / configure the wireless interface in client mode on OpenWRT, with both LuCI and the command line interface (CLI)
Long summary: We will connect the OpenWRT router to an Access Point (AP) and provide the internet connection from that interface to any other devices connected to the OpenWRT router Ethernet ports and AP, which are in the br-lan bridge interface.
Video timeframe:
00:00 - Intro - OpenWRT AP (Access Point) STA(Station)
00:17 - Network topology overview
01:33 - Setup AP Client/ Wireless Client on OpenWRT LuCI
06:35 - Test with LuCI
10:00 - Setup AP Client/ Wireless Client on OpenWRT with Command Line Inteface (CLI)
10:19 - Modify the wireless configuration file - /etc/config/wireless
13:56 - Create a new wwan network interface - /etc/config/network
14:55 - Add the new interface to WAN firewall zone - /etc/config/firewall
16:20 - Check and Troubleshoot / Wrong encryption
17:25 - Final checks and bmon & speedtest
21:40 - Next video spoiler
Some basic terms:
AP Client or Wireless Client mode allows the Access Point to become a wireless client to another AP.
Access Point Mode allows the wireless device to share the connection to other devices wirelessly. It is the default mode for most the wireless routers, which is also called WiFi hotspot.
OpenWRT guide for AP client, by vgaetera - openwrt.org/docs/guide-user/network/wifi/connect_client_wifi
Thanks for watching and see you all in the next video!
In this video, we will set up AP Client / configure the wireless interface in client mode on OpenWRT, with both LuCI and the command line interface (CLI)
Long summary: We will connect the OpenWRT router to an Access Point (AP) and provide the internet connection from that interface to any other devices connected to the OpenWRT router Ethernet ports and AP, which are in the br-lan bridge interface.
Video timeframe:
00:00 - Intro - OpenWRT AP (Access Point) STA(Station)
00:17 - Network topology overview
01:33 - Setup AP Client/ Wireless Client on OpenWRT LuCI
06:35 - Test with LuCI
10:00 - Setup AP Client/ Wireless Client on OpenWRT with Command Line Inteface (CLI)
10:19 - Modify the wireless configuration file - /etc/config/wireless
13:56 - Create a new wwan network interface - /etc/config/network
14:55 - Add the new interface to WAN firewall zone - /etc/config/firewall
16:20 - Check and Troubleshoot / Wrong encryption
17:25 - Final checks and bmon & speedtest
21:40 - Next video spoiler
Some basic terms:
AP Client or Wireless Client mode allows the Access Point to become a wireless client to another AP.
Access Point Mode allows the wireless device to share the connection to other devices wirelessly. It is the default mode for most the wireless routers, which is also called WiFi hotspot.
OpenWRT guide for AP client, by vgaetera - openwrt.org/docs/guide-user/network/wifi/connect_client_wifi
Thanks for watching and see you all in the next video!










