Uploaded September 2023 | Updated November 2026, 2 hours ago
One Hundred and One Monochrome Mazes was an early game for the IBM PC and one of the only "Monochrome Exclusive" games ever made. The game was programmed for the IBM Monochrome and Printer Display Adapter and IBM 5151 Monochrome Display. It will also run on a Hercules Graphics Card and, with some visual differences, on an Enhanced Graphics Adapter (EGA) in Monochrome mode. The game does not run on a CGA or other video adapter which appears as a "color adapter" for reasons I will get into later.
The game uses the MDA's 80-column text mode, the only mode MDA can display, and uses ASCII characters for walls, floors, pits and your cursor. Normally the game will display on a monochrome monitor with three shades of intensity: black, white and intense white. Green and amber monitors were more often used. The MDA and CGA share the same 9-pin video connector, and an MDA display only uses the pins for monochrome video and intensity, it does not use the red, green and blue pins.
It was recently discovered that earlier MDA cards can and do drive the red, green and blue pins, whereas later cards do not connect those pins to the driver outputs. When certain attributes are set for a character cell, this will show different colors on the early MDA cards just like with CGA cards. Certain multi-sync monitors can display "color MDA" and capture devices like the RGB2HDMI used here can interpret the color signals off the pins as if the scaler was connected to a CGA card. In fact, when I connected my MDA to the RGB2HDMI for the first time I thought it odd that it displayed some color text and thought it was just some weirdness because MDA and Hercules have slightly different technical characteristics. Later I recalled the discovery of "color MDA" and determined I had one. Hercules and EGA cards do not support this hidden feature.
On an 80-column display, every text cell is defined by a character byte, which selects the pattern to display in that cell like a letter, number or punctuation symbol, and by an attribute byte, which sets the foreground and background color/intensity and other attributes like blinking and underlining. The game uses attribute bytes to define the behavior of each text cell, whether it is a floor, wall or pit. It also uses these attribute bytes to define hidden walls and pits. On a monochrome display these attribute bytes appear no different from floor tiles, but on a color display the attribute bytes cause them to be colored differently, ruining the surprises. That is why the game is not compatible with color adapters. Hidden walls (green) and pits (blue) first appear in Maze 11. I believe the game changes the attribute byte of floor tiles "walked on" to calculate the score.
The color capabilities of the early MDA cards are not very useful as any colors shown in 80-column text programs would usually be unintended. The failure of IBM to develop this capability is a shame because, compared to the CGA 80-column mode, the text is nicer overall, the descenders are given more lines to use and there is no "CGA" snow. MDA and CGA can coexist in the IBM PC and were sometimes used in tandem with two monitors displaying each adapter's respective strengths. Of course, if you want to cheat in One Hundred and One Monochrome Mazes, then color becomes really helpful :)
The MDA 80-column text resolution is 720x350, so I scaled it to 2880x2100 and added a small vertical border to get it to 2160 pixels for the 4K requirement. This gives a pixel aspect ratio of 2:3, which is the nominally correct pixel aspect ratio according to the manual of the Hercules Graphics Card. As there is little sound from the game, I have decided to "add in" some more sounds by recording my IBM PC Model 5150 with a binaural microphone. You will hear the noise of the fan and the clickety-clack of the IBM PC 83-Keyboard throughout the video. The only thing you would not hear is the sound of the floppy drives as I am running the game off an XT-IDE and CF card adapter.
One Hundred and One Monochrome Mazes was an early game for the IBM PC and one of the only "Monochrome Exclusive" games ever made. The game was programmed for the IBM Monochrome and Printer Display Adapter and IBM 5151 Monochrome Display. It will also run on a Hercules Graphics Card and, with some visual differences, on an Enhanced Graphics Adapter (EGA) in Monochrome mode. The game does not run on a CGA or other video adapter which appears as a "color adapter" for reasons I will get into later.
The game uses the MDA's 80-column text mode, the only mode MDA can display, and uses ASCII characters for walls, floors, pits and your cursor. Normally the game will display on a monochrome monitor with three shades of intensity: black, white and intense white. Green and amber monitors were more often used. The MDA and CGA share the same 9-pin video connector, and an MDA display only uses the pins for monochrome video and intensity, it does not use the red, green and blue pins.
It was recently discovered that earlier MDA cards can and do drive the red, green and blue pins, whereas later cards do not connect those pins to the driver outputs. When certain attributes are set for a character cell, this will show different colors on the early MDA cards just like with CGA cards. Certain multi-sync monitors can display "color MDA" and capture devices like the RGB2HDMI used here can interpret the color signals off the pins as if the scaler was connected to a CGA card. In fact, when I connected my MDA to the RGB2HDMI for the first time I thought it odd that it displayed some color text and thought it was just some weirdness because MDA and Hercules have slightly different technical characteristics. Later I recalled the discovery of "color MDA" and determined I had one. Hercules and EGA cards do not support this hidden feature.
On an 80-column display, every text cell is defined by a character byte, which selects the pattern to display in that cell like a letter, number or punctuation symbol, and by an attribute byte, which sets the foreground and background color/intensity and other attributes like blinking and underlining. The game uses attribute bytes to define the behavior of each text cell, whether it is a floor, wall or pit. It also uses these attribute bytes to define hidden walls and pits. On a monochrome display these attribute bytes appear no different from floor tiles, but on a color display the attribute bytes cause them to be colored differently, ruining the surprises. That is why the game is not compatible with color adapters. Hidden walls (green) and pits (blue) first appear in Maze 11. I believe the game changes the attribute byte of floor tiles "walked on" to calculate the score.
The color capabilities of the early MDA cards are not very useful as any colors shown in 80-column text programs would usually be unintended. The failure of IBM to develop this capability is a shame because, compared to the CGA 80-column mode, the text is nicer overall, the descenders are given more lines to use and there is no "CGA" snow. MDA and CGA can coexist in the IBM PC and were sometimes used in tandem with two monitors displaying each adapter's respective strengths. Of course, if you want to cheat in One Hundred and One Monochrome Mazes, then color becomes really helpful :)
The MDA 80-column text resolution is 720x350, so I scaled it to 2880x2100 and added a small vertical border to get it to 2160 pixels for the 4K requirement. This gives a pixel aspect ratio of 2:3, which is the nominally correct pixel aspect ratio according to the manual of the Hercules Graphics Card. As there is little sound from the game, I have decided to "add in" some more sounds by recording my IBM PC Model 5150 with a binaural microphone. You will hear the noise of the fan and the clickety-clack of the IBM PC 83-Keyboard throughout the video. The only thing you would not hear is the sound of the floppy drives as I am running the game off an XT-IDE and CF card adapter.



![Tandy Radio Shack TRS-80 Model 1 Gaming on Original Hardware
Earlier this month I obtained a Tandy/Radio Shack TRS-80 [Model 1] Computer, one of the 1977 Trinity of home computers. The TRS-80 was originally more popular than the Apple II or Commodore PET and sold far many more units than Tandy Corporation expected it to sell. It was discontinued at the end of 1980 with the introduction of new limits by the FCC on the emission of RF noise.
The TRS-80 was not particularly known as a gaming machine, but there were hundreds of games written for it. Games came on cassette tape and later floppy disk. Most cassette-based games require a machine with Level II BASIC and 16KiB of RAM, which is what my system has. Many games focused more toward the TRS-80 Model III or IV can still be run on a Model I with 48KiB and disk drives.
The graphics capabilities of this system are extremely modest. There is no color and per-pixel addressable semigraphics have an effective resolution 128x48 pixels. Apple or PC Speaker-like audio can be heard via the cassette output jack. Input usually keyboard only, which is how I am playing these games and why I sucked so hard. The Z80 CPU runs at 1.77MHz, which is slow even by 8-bit standards.
For this video I picked four famous or impressive games. Dancing Demon was a very popular piece of entertainment software for the TRS-80. Frogger and Zaxxon are very impressive and officially licensed ports. Frogger and Zaxxon both implement countdown timers telling the user exactly how long the program has to load. I edited out most of the counts and loading. Sea Dragon is another game which may have been more impressive on other systems, but it is pretty amazing it works as well as it does here.
The TRS-80 Computer had a special display you can purchase, but it also could be connected to a home TV via an RF adapter. However, the 64-column text mode used an effective 384x192 resolution, which would make the text a bit difficult to read on a home TV. (You can see the 32-column text when the Dancing Demon program announces Let the show begin). The Power, Video and Cassette connectors on the TRS-80 all use 5-pin DIN connectors, and I used a DIN to composite video cable to get the signal from the computer.
As the computer uses a composite video connection, I figured it would be quite possible to capture a high quality image via my Datapath VisionRGB E1s as I did with the Apple II once I eliminated its color burst signal. And with a component to VGA cable and then a VGA to DVI adapter, I was able to get the image. The signal required a fair bit of tweaking before I could get text across the screen without shimmer and to reduce video noise. I do not believe anyone else has uploaded a capture of similar quality to Youtube from original hardware.
When the system is loading from cassette or drawing graphics with text, there may be some phase shimmer. This appears to be normal. Also, sometimes graphics will show random flickery lines, this is also normal as the CPU and the video display hardware fight for RAM access. Tandy Radio Shack TRS-80 Model 1 Gaming on Original Hardware](https://i.ytimg.com/vi/c3n4OA7D_MA/mqdefault.jpg)





![Ultima I + II PC-9801 Complete Soundtrack
Ultima I and II were converted to the NEC PC-9801 computer in the late 1980s for sale in Japan. Both games ports were published by Pony Canyon. Ultima I was ported from the IBM PC-DOS version to PC-9801 by DeskTop, Inc. Ultima II was rewritten from scratch by DeskTop, Inc. and JH1NRR.
All Origin Systems and Sierra Online versions of Ultimas I and II were without music, leaving Ultima III as the first Ultima series entry with original music. The port of Ultima I for the Apple IIgs had music but that port was released in 1994, long after Ultima I had any currency. That is what makes the Pony Canyon ports special: Japanese composer Takeshi Yasuda (安田毅) https://vgmpf.com/Wiki/index.php/Takeshi_Yasuda wrote a number of original pieces for the ports of these two titles. As some tracks are shared between the two games, we present the music of both games in a single video. While some songs, such as Castle and Town, are rather generic, Ultima IIs Title, Tower, Hot and Cold Planet pieces are stand-outs and, in our opinion, worthy of being included in the Ultima music canon.
Getting the PC-9801 versions to play music requires a PC-9801-26 or compatible sound card on real hardware, or an emulator that is configured to emulate that sound card along with its Sound BIOS. The latter aspect is not trivial, as the ROM file must be supplied by the user, and neither Neko Project nor DOSBox-X display any error message when they cannot find the ROM file; you just will not hear any music.
The NEC PC8801mkIISR versions have the same music with somewhat different arrangements, even as the YM2203 sound chip is the same. The Fujitsu FM-Towns version of the Ultima I-III Trilogy CD plays music that was seemingly composed for Ultima III in inappropriate locations in Ultimas I and II as well, but more on that in a future video.
The music was captured to the .VGM format using Neko Project and rendered to .WAV using NukedOPN2 running at the chips native clock rate, then downsampled to 44.1 kHz using SOX. As the FM instruments sound overly bright, a first-order low-pass filter with a corner frequency of 3.68 kHz was applied, bringing the frequency spectrum closer to that of normal music.
Track list:
00:00 - Ultima I Title [I]
00:56 - Wandering [I+II]
01:29 - Castle [I+II]
03:27 - Town [I+II]
05:15 - Dungeon [I+II]
06:09 - Space Travel [I]
06:40 - Fight Against Mondain [I]
07:33 - Ultima II Title [II]
08:27 - Tower [II]
09:39 - Hot Planet [II]
10:40 - Cold Planet [II]
11:32 - Minax Castle [II]
12:55 - Ending (Rule Britannia) [I+II]
The final song is forty seconds long, we do not know why it goes on for longer. Ultima I + II PC-9801 Complete Soundtrack](https://i.ytimg.com/vi/fXCccDMD8VA/mqdefault.jpg)
