Uploaded March 2022 | Updated November 2026, 3 hours ago
I have had an RGB2HDMI for a while now, but the bare board can only capture digital signals. There is an Analog Board add-on which can capture certain monochrome signals, mainly those without a significant color component to them. Yesterday I bought an Analog Board add-on from Retro Hack Shack and made a cable to connect my Apple IIe's composite video out to the RGB2HDMI. Here is a capture from the system.
In the past I have obtained monochrome video capture by disconnecting the color carrier from the composite signal generated inside the Apple IIe. I did not wish to leave the Apple IIe in that state because I could not use color even on a color CRT. The Analog Board provided a much more convenient system, requiring no mods to the Apple IIe.
The image flickers for a bit on bootup, this is normal and may be fixable by fiddling with the genlock settings. I show the RGB2HDMI menu settings to go from monochrome video to artifact color video. The artifacts are being generated by RGB2HDMI based on the pixel data, but the RGB2HDMI needs the correct phase dialed in to show the proper colors. Connecting to the signals directly from the Apple IIe's mainboard or the Apple //c's display connector will permit you to always show text in monochrome, even in the mixed-mode display modes (real Apple IIs do not kill the color for the mixed modes). The Apple IIs (except for rev 0s) kill the color in full text modes, so the wDrive's menu is not always 100% correct in this video.
The game I am playing is called Sea Dragon. The game is rather well-known on the Apple II platform for its impressive technical abilities. Smooth horizontal scrolling was not common in Apple II games, nevermind diagonal scrolling. Digitized speech was also very rare, outputting samples took up pretty much 100% of CPU time. The object of the game is to maneuver through the sea trench, avoiding mines, gun turrets, deadly sea weed, electric barriers and the ocean surfaces themselves. Colliding with any will set you back to the last checkpoint and your damage score will go up. When you reach 100% damage or your air runs out, you lose the game. You can destroy certain obstacles with missiles and you can clear all objects on the screen at the cost of a significant amount of air.
Unfortunately, as you can hear from the microphone, I am using the keyboard to play the game. This accounts for the pathetic gameplay on display, this game cries out for a gamepad. The purpose of this video was more about the RGB2HDMI than my gaming skills.
I have had an RGB2HDMI for a while now, but the bare board can only capture digital signals. There is an Analog Board add-on which can capture certain monochrome signals, mainly those without a significant color component to them. Yesterday I bought an Analog Board add-on from Retro Hack Shack and made a cable to connect my Apple IIe's composite video out to the RGB2HDMI. Here is a capture from the system.
In the past I have obtained monochrome video capture by disconnecting the color carrier from the composite signal generated inside the Apple IIe. I did not wish to leave the Apple IIe in that state because I could not use color even on a color CRT. The Analog Board provided a much more convenient system, requiring no mods to the Apple IIe.
The image flickers for a bit on bootup, this is normal and may be fixable by fiddling with the genlock settings. I show the RGB2HDMI menu settings to go from monochrome video to artifact color video. The artifacts are being generated by RGB2HDMI based on the pixel data, but the RGB2HDMI needs the correct phase dialed in to show the proper colors. Connecting to the signals directly from the Apple IIe's mainboard or the Apple //c's display connector will permit you to always show text in monochrome, even in the mixed-mode display modes (real Apple IIs do not kill the color for the mixed modes). The Apple IIs (except for rev 0s) kill the color in full text modes, so the wDrive's menu is not always 100% correct in this video.
The game I am playing is called Sea Dragon. The game is rather well-known on the Apple II platform for its impressive technical abilities. Smooth horizontal scrolling was not common in Apple II games, nevermind diagonal scrolling. Digitized speech was also very rare, outputting samples took up pretty much 100% of CPU time. The object of the game is to maneuver through the sea trench, avoiding mines, gun turrets, deadly sea weed, electric barriers and the ocean surfaces themselves. Colliding with any will set you back to the last checkpoint and your damage score will go up. When you reach 100% damage or your air runs out, you lose the game. You can destroy certain obstacles with missiles and you can clear all objects on the screen at the cost of a significant amount of air.
Unfortunately, as you can hear from the microphone, I am using the keyboard to play the game. This accounts for the pathetic gameplay on display, this game cries out for a gamepad. The purpose of this video was more about the RGB2HDMI than my gaming skills.
![Ultima I + II PC-9801 Complete Soundtrack
Ultima I and II were converted to the NEC PC-9801 computer in the late 1980s for sale in Japan. Both games ports were published by Pony Canyon. Ultima I was ported from the IBM PC-DOS version to PC-9801 by DeskTop, Inc. Ultima II was rewritten from scratch by DeskTop, Inc. and JH1NRR.
All Origin Systems and Sierra Online versions of Ultimas I and II were without music, leaving Ultima III as the first Ultima series entry with original music. The port of Ultima I for the Apple IIgs had music but that port was released in 1994, long after Ultima I had any currency. That is what makes the Pony Canyon ports special: Japanese composer Takeshi Yasuda (安田毅) https://vgmpf.com/Wiki/index.php/Takeshi_Yasuda wrote a number of original pieces for the ports of these two titles. As some tracks are shared between the two games, we present the music of both games in a single video. While some songs, such as Castle and Town, are rather generic, Ultima IIs Title, Tower, Hot and Cold Planet pieces are stand-outs and, in our opinion, worthy of being included in the Ultima music canon.
Getting the PC-9801 versions to play music requires a PC-9801-26 or compatible sound card on real hardware, or an emulator that is configured to emulate that sound card along with its Sound BIOS. The latter aspect is not trivial, as the ROM file must be supplied by the user, and neither Neko Project nor DOSBox-X display any error message when they cannot find the ROM file; you just will not hear any music.
The NEC PC8801mkIISR versions have the same music with somewhat different arrangements, even as the YM2203 sound chip is the same. The Fujitsu FM-Towns version of the Ultima I-III Trilogy CD plays music that was seemingly composed for Ultima III in inappropriate locations in Ultimas I and II as well, but more on that in a future video.
The music was captured to the .VGM format using Neko Project and rendered to .WAV using NukedOPN2 running at the chips native clock rate, then downsampled to 44.1 kHz using SOX. As the FM instruments sound overly bright, a first-order low-pass filter with a corner frequency of 3.68 kHz was applied, bringing the frequency spectrum closer to that of normal music.
Track list:
00:00 - Ultima I Title [I]
00:56 - Wandering [I+II]
01:29 - Castle [I+II]
03:27 - Town [I+II]
05:15 - Dungeon [I+II]
06:09 - Space Travel [I]
06:40 - Fight Against Mondain [I]
07:33 - Ultima II Title [II]
08:27 - Tower [II]
09:39 - Hot Planet [II]
10:40 - Cold Planet [II]
11:32 - Minax Castle [II]
12:55 - Ending (Rule Britannia) [I+II]
The final song is forty seconds long, we do not know why it goes on for longer. Ultima I + II PC-9801 Complete Soundtrack](https://i.ytimg.com/vi/fXCccDMD8VA/mqdefault.jpg)









