Peter Millard | Old House, New Window [video 456] @10MinuteWorkshop | Uploaded 3 years ago | Updated 1 hour ago
In this mostly vlog-style video I stray into uncharted #DIY waters when I replace my first ever double-glazed #window in my #Victorian house. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 tools I wish I had at the start - youtu.be/enmHfvgRTrw
5 Festool gamechangers - youtu.be/R9a1qzLsjFA
Cabinetry Basics P3 - youtu.be/iKle2JqhEV8
Basic Plywood boxes - youtu.be/li5AIXw3XPE
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - 10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at 10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Soudal expanding foam - amzn.to/3ePaKiv (US: [similar] amzn.to/3wevshH)
Clear silicone sealant - amzn.to/3ok0KRf (US: [similar] amzn.to/33Nzn8I)
Everbuild Lumberjack 5-minute PU adhesive - amzn.to/2rSAAMn (US: nope)
Bessey DuoKlamp - amzn.to/3eDz1Ig (US: amzn.to/3w1s1dM)
Festool CXS - http://amzn.to/2syMO8Z (US: http://amzn.to/2r0TZ7U)
Recipe saw blade handle - [similar] amzn.to/2SSGFpH (US: nope, sorry.)
Other useful gear:-
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
In this mostly vlog-style video I stray into uncharted #DIY waters when I replace my first ever double-glazed #window in my #Victorian house. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 tools I wish I had at the start - youtu.be/enmHfvgRTrw
5 Festool gamechangers - youtu.be/R9a1qzLsjFA
Cabinetry Basics P3 - youtu.be/iKle2JqhEV8
Basic Plywood boxes - youtu.be/li5AIXw3XPE
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - 10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at 10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Soudal expanding foam - amzn.to/3ePaKiv (US: [similar] amzn.to/3wevshH)
Clear silicone sealant - amzn.to/3ok0KRf (US: [similar] amzn.to/33Nzn8I)
Everbuild Lumberjack 5-minute PU adhesive - amzn.to/2rSAAMn (US: nope)
Bessey DuoKlamp - amzn.to/3eDz1Ig (US: amzn.to/3w1s1dM)
Festool CXS - http://amzn.to/2syMO8Z (US: http://amzn.to/2r0TZ7U)
Recipe saw blade handle - [similar] amzn.to/2SSGFpH (US: nope, sorry.)
Other useful gear:-
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
![Old House, New Window [video 456]](https://i.ytimg.com/vi/oMVpiBlu110/hqdefault.jpg "Old House, New Window [video 456]
In this mostly vlog-style video I stray into uncharted #DIY waters when I replace my first ever double-glazed #window in my #Victorian house. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 tools I wish I had at the start - https://youtu.be/enmHfvgRTrw
5 Festool gamechangers - https://youtu.be/R9a1qzLsjFA
Cabinetry Basics P3 - https://youtu.be/iKle2JqhEV8
Basic Plywood boxes - https://youtu.be/li5AIXw3XPE
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Soudal expanding foam - https://amzn.to/3ePaKiv (US: [similar] https://amzn.to/3wevshH)
Clear silicone sealant - https://amzn.to/3ok0KRf (US: [similar] https://amzn.to/33Nzn8I)
Everbuild Lumberjack 5-minute PU adhesive - https://amzn.to/2rSAAMn (US: nope)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool CXS - http://amzn.to/2syMO8Z (US: http://amzn.to/2r0TZ7U)
Recipe saw blade handle - [similar] https://amzn.to/2SSGFpH (US: nope, sorry.)
Other useful gear:-
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Trend T12 - First impressions [video 489][Gifted**]](https://i.ytimg.com/vi/p_MJny9rZqE/hqdefault.jpg "Trend T12 - First impressions [video 489][Gifted**]
This is a first look at the #Trend #T12 #router - the T12 and T14 are the first routers Ive seen that have been refigured to comply with the legislation that came in last year, and that I discussed during my router bench build. Long story short, all new routers need to have the equivalencies of an NVR switch built into them, and this makes it challenging to use them in a router table.
Trend’s solution is two models, one for hand-held use, and one made for table-mounting, and in this video I take a quick look at the hand-held Trend T12.
**This product was supplied by Trend for Review. I have not been paid by Trend to make this video or to say nice things about the product. I have no financial interest in this product, or in Trend Tools and Technology. Find the full spec of the T12 router here - https://bit.ly/TrendT12.
+++++++
IEC 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers can be found here - https://webstore.iec.ch/publication/3...
About that legislation…
OK, so I had many, many questions about this and I only know what I’ve been told; its really hard to get solid information on the legislation without buying a copy pf the IEC standard (link above, ~£120 - feel free to go ahead and tell me what you find...) but from what Im told, the legislation is really for manufacturers, it doesnt effect legacy routers, only new sales, and retailers have 12 months to sell their existing stock.
The legislation came into force on December 21st last year, and the principle change is the addition of a built-in equivalent of an NVR switch, which would make routers difficult to use in a table. There was talk apparently of expanding the reach to include routers used in professional workshops, but that seems to have been dropped as Id imagine it would be impossible to police or enforce.
Thats all I know!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest
Torsion Box Router Bench Build - https://youtu.be/Q-Vyq4ShHT0
Router bench Teardown - https://youtu.be/hRCSoNlQFew
Badger Workshop - https://www.youtube.com/c/Badgerworkshop
Hand-i-craft - https://www.youtube.com/channel/UCsjajInRuovnCnw9tHfSXVA
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
3 Easy Wins; New Benchtops - https://youtu.be/XVSp9yDmGYM
LR32MFT - https://youtu.be/C_J-PKrUo1Y
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Bargain or Burden? I bought the Wolfcraft 1600 Mobile Bench to find out [video 566]](https://i.ytimg.com/vi/pqy8IUnLDY4/hqdefault.jpg "Bargain or Burden? I bought the Wolfcraft 1600 Mobile Bench to find out [video 566]
If you’re in the market for a mobile workbench that’s a step up from the £/$/€100 plastic offerings but don’t have the budget for a full-blown Festool MFT then you’ll find the options to be pretty thin on the ground, so I was interested to see the Wolfcraft Master work 1600 Mobile Bench on Amazon at £275**; interested enough to buy one and take a closer look. Enjoy!
N.B. Happy to confirm that the hole spacing is on 128mm centres ie still on the 32mm system, though Im not sure if that makes more sense now, or less... 🤷♂️
Looking for a portable workench? Shop the video here - https://amzn.to/4clsH3I
**UK price including VAT at the time of purchase. Americans, please note that Wolfcraft do not have formal U.S. distribution, any item you see on Amazon.com is there by a third party and does not reflect OEM pricing in the UK/EU**
+++++++++
Join the 10MinuteWorkshop Plus community, more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch and get the all the 10MW factsheets, included in the next issue.
Can’t wait? Become a 10minuteworkshop Plus member* and get the factsheets, free plans and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop or in the product shelf directly beneath this videos.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Basic Builds Playlist - https://bit.ly/BasicBuilds
My Last Build & Install - https://bit.ly/MyLastBuild
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Portable Bench Build - https://youtu.be/7OqrljJHOaw
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Extrusion Confusion - A Guide To MFT Hardware - https://youtu.be/za5B-XrSuH0
3 MFT jigs, 3 MFT tops - https://youtu.be/iAIZQsXPXR4
SauterShop VarioBench - https://youtu.be/0Cs092FZW3U
MFT top replacement - https://youtu.be/09an8aZrTqs
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
LR32 MFT - https://youtu.be/C_J-PKrUo1Y
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Wolfcraft Master work 1600 Mobile Bench - https://amzn.to/494ewNI
Keter folding workbench - https://amzn.to/3vecTPK
Stanley Fatmax workbench - https://amzn.to/3v6fJGx
Bora Centipede (large) - https://amzn.to/4ci8Kei
Bora Centipede (small) - https://amzn.to/3IIJ5xC
Bora folding MFT top - https://amzn.to/3IG5xYh
UJK multifunction bench with trestles - https://amzn.to/43oWFQc
Festool MFT/3 - https://amzn.to/48Zvkpb
Dashboard PWS - https://www.dashboardpws.com")
![2 Clamp Racks & 5 Unsung (workshop) Heroes [video 509]](https://i.ytimg.com/vi/qJ4niRhu4zY/hqdefault.jpg "2 Clamp Racks & 5 Unsung (workshop) Heroes [video 509]
In this one I make a couple of quick and simple clamp racks, and in the process re-discover 5 tools and accessories that are truly the unsung heroes of the workshop. Enjoy!
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
If Clamps Fight Back, Make A Rack! - https://youtu.be/uyJZ-lQ0LHw
5 Basic Clamps - https://youtu.be/kfWIsh-X8HQ
Matchfit Microjig dovetail clamps - https://youtu.be/uiT6F-K26Tg
Festool vs Cheap Tool, MFT clamps - https://youtu.be/mG5siTVitUw
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured in this video (other brands are available)
3M 9088 strong double-sided tape - https://amzn.to/3u2Ekqw
‘Everyday’ double-sided tape - https://amzn.to/3th16eL
Trend Snappy flip bit set - https://amzn.to/3AtMSLL
Bosch Multipurpose drill bit set - https://amzn.to/3ToAMdi
Bosch green hammer drill (similar, not £5 anymore!) - https://amzn.to/3UodZiZ
Cheap corded hammer drill (choice) - https://amzn.to/3NXRTSm
03 Adhesive thick CA glue - https://amzn.to/3DYIMfx
O3 Adhesive Accelerator - https://amzn.to/3zwtehH
Dave Stanton Dog Locks (UK) - https://www.etsy.com/uk/listing/1324340248/
Other handy gear:-
Bosch 10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)")
![First Look: #Benchdogs Ultra #MFT Workstation! [video 579]](https://i.ytimg.com/vi/qZK7BWI-PH0/hqdefault.jpg "First Look: #Benchdogs Ultra #MFT Workstation! [video 579]
Something a little different this week as I abandon the 10MinuteWorkshop for a trip to the Somerset countryside to take a first look at the brand new Benchdogs Ultra MFT Workstation.
As a Benchdogs affiliate I may receive a small commission on qualifying sales at no cost to yourself, so many thanks if you do. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
See the tech specs of the Ultra MFT Workstation here - https://benchdogs.co.uk/collections/ultra-mft-workstation?ref=1x_p0bagtnr
Bundle pricing with fence and hinge system now available here - https://benchdogs.co.uk/collections/ultra-mft-workstation/products/ultra-mft-workstation-bundle-pre-order-shipping-oct-2024?ref=1x_p0bagtnr
View the full Benchdogs Fence systems here - https://benchdogs.co.uk/collections/fence-systems-1?ref=1x_p0bagtnr
Benchdogs Quad rail hinge here - https://benchdogs.co.uk/collections/hinge-system?ref=1x_p0bagtnr
Table of Contents:
00:00 Introduction
00:30 Full workstation strip down
04:52 Ultra MFT core
06:00 Alternative MFTs
06:47 Size, weight...
07:42 Wheel set option
08:35 Hinge compatibility
10:20 Ultra MFT basic - whats missing?
11:40 Ultra MFT Ultimate - Valchromat
12:31 1-minute stripdown
14:19 Outro & thanks
Related content:
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Portable Bench Build - https://youtu.be/7OqrljJHOaw
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Extrusion Confusion - A Guide To MFT Hardware - https://youtu.be/za5B-XrSuH0
3 MFT jigs, 3 MFT tops - https://youtu.be/iAIZQsXPXR4
SauterShop VarioBench - https://youtu.be/0Cs092FZW3U
MFT top replacement - https://youtu.be/09an8aZrTqs
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
LR32 MFT - https://youtu.be/C_J-PKrUo1Y
The Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![Little Plywood Boxes - a basic build [video 495]](https://i.ytimg.com/vi/qg1jdYy0QTE/hqdefault.jpg "Little Plywood Boxes - a basic build [video 495]
In this video I make a set of small #BirchPly #boxes from recycled / upcycled #LooseTenonJigs using only a simple toolset - an entry-level plunge saw, a hammer and nails and a set of cheap chisels. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest:-
Plywood shelves, a basic build - https://youtu.be/gNobuRCBr_Q
Basic Plywood Boxes - https://youtu.be/li5AIXw3XPE
Torsion box router bench - https://youtu.be/Q-Vyq4ShHT0
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Two £79 saws - https://youtu.be/Ebm-EEXNZHE
Flat-pack CNC Loose Tenon Jig - https://youtu.be/1dcI7amQisA
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Benchdogs FenceDogs - https://youtu.be/DezSQjhcbbk
Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Note that prices fluctuate - some have risen since I made my purchases.
Triton 48t blade - https://amzn.to/2EQgUMJ
Cheap chisels [similar] - https://amzn.to/3NFmCTm (US: [similar] https://amzn.to/386DYZ4)
Macallister plunge saw - available in the UK from B&Q stores at diy.com
10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
20mm conduit - https://www.toolstation.com/20mm-heavy-duty-pvc-round-conduit/p71029
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Peanut 2 MiniJig Revised - and revisited! [video 474][**Gifted/Ad]](https://i.ytimg.com/vi/r38uEEUkx0w/hqdefault.jpg "Peanut 2 MiniJig Revised - and revisited! [video 474][**Gifted/Ad]
In this video I take a look at the revised and now #Domino compatible #Peanut2 #MiniJig from Intelligent Fixings. Enjoy!
**This video may contain items that were supplied/gifted for review. This is not a sponsored video, I have not been paid to make this video or say nice things about the product; as an affiliate I may earn from qualifying sales, so thank you for using the links below if making a purchase.
Timecodes
0:00 Intro
0:45 Peanut 2 recap
1:58 Peanut 2 revised features
6:26 Member thanks
7:23 Loose tenon cutting
9:38 Joint assembly
10:35 Upgrade options
+++++++++
Peanut 2 Mini Jig bundle at IF - https://shop.intelligentfixings.com/products/peanut-mini-jig-complete-set?ref=10minuteworkshop
Intelligent Fixings on YouTube - https://www.youtube.com/channel/UCk4S-y5jUNpWNBV4mcy8CHQ
Peanut 2 Mini Jig bundle at Axminster Tools - https://www.tagserve.com/clickServlet?AID=2805&MID=485&PID=691&SID=3464&CID=1965&SUBID=&TARGETURL=https://www.axminstertools.com/peanut-2-mini-jig-complete-package-107760?utm_source=tag&utm_medium=affiliates&utm_content={TAG.AID}
Axminster tools on YouTube - https://www.youtube.com/user/axminstertoolcentre
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Non-UK distribution:-
US/Canada distributor - https://www.richelieu.com/intl/en/ ( Richelieu - products will become available soon)
German distributor - https://www.dictum.com/en/ (Dictum)
South Africa distributor - https://hwconline.co.za (Hardware Centre)
France distributor - https://www.foussier.fr (Foussier)
+++++++++
Peanut 2 System & Projects playlist - https://bit.ly/Peanut2system
Other videos mentioned:-
Cabinetry Basics P3 - https://youtu.be/iKle2JqhEV8
Basic Plywood boxes - https://youtu.be/li5AIXw3XPE
10 Years of Domino - https://youtu.be/7oxd2Qnvyw0
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connectors - https://amzn.to/2mV8OJu (US:https://amzn.to/2LKRDZ1)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)")
![[AD**]In this one I’m taking a look at the new @evolutionpowertools rail connectors.](https://i.ytimg.com/vi/rgsjgy4jK7Y/hqdefault.jpg "[AD**]In this one I’m taking a look at the new @evolutionpowertools rail connectors.
[AD**]In this one I’m taking a look at the new guiderail joining bars from @evolutionpowertools
**Paid partnership with @evolutionppowertools_uk, thank you so much for early access to the products.")
![Loose Tenon Jig Plus [video 493]](https://i.ytimg.com/vi/s79rc8yzbLQ/hqdefault.jpg "Loose Tenon Jig Plus [video 493]
In this video is it my pleasure to introduce the latest 10MinuteWorkshop Loose #Tenon Jig, the LTJ+. Though functionally similar to the original #LooseTenon #Jig, the ‘plus’ is bigger, and it does more. Bigger, so it’s easier to use with larger routers, with wings for easier clamping and a clamping area ‘safe zone’ that’s clearly marked, and with rows of guide bush holes that makes boring holes on 32mm centres a breeze - perfect for shelf pins. Enjoy!
2023 update; this jig and the original were discontinued pending the launch of the latest veraion, the LTJ30, which is available at the 10MinuteWorkshop store at 10minute.shop, or follow the link on the ‘merchant shelf’ directly below the video.
+++++
Other videos mentioned:-
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
Flat-pack CNC Loose tenon Jig - https://youtu.be/1dcI7amQisA
Loose Tenon basics - https://youtu.be/t86QGUn7dAI
+++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
18mm Guide Bush (3D printed) for OF1010 router - https://etsy.me/3OuHYn8
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool Midi bluetooth extractor - https://amzn.to/3q29VXI (US: 🤷♂️)
Festool bluetooth remote - https://amzn.to/3s4yHcB (US: 🤷♂️)
1/4” shank x 5mm Carbide spiral upcut bit - https://www.rennietool.co.uk/collections/solid-carbide-router-bits/products/solid-carbide-2-flute-up-cut-spiral-router-bits-on-a-1-4-shank?variant=32477353640023&aff=2
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA")
