Peter Millard | 2 Clamp Racks & 5 Unsung (workshop) Heroes [video 509] @10MinuteWorkshop | Uploaded 1 year ago | Updated 3 hours ago
In this one I make a couple of quick and simple clamp racks, and in the process re-discover 5 tools and accessories that are truly the unsung heroes of the workshop. Enjoy!
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
If Clamps Fight Back, Make A Rack! - youtu.be/uyJZ-lQ0LHw
5 Basic Clamps - youtu.be/kfWIsh-X8HQ
Matchfit Microjig dovetail clamps - youtu.be/uiT6F-K26Tg
Festool vs Cheap Tool, MFT clamps - youtu.be/mG5siTVitUw
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured in this video (other brands are available)
3M 9088 strong double-sided tape - amzn.to/3u2Ekqw
‘Everyday’ double-sided tape - amzn.to/3th16eL
Trend Snappy flip bit set - amzn.to/3AtMSLL
Bosch Multipurpose drill bit set - amzn.to/3ToAMdi
Bosch green hammer drill (similar, not £5 anymore!) - amzn.to/3UodZiZ
Cheap corded hammer drill (choice) - amzn.to/3NXRTSm
03 Adhesive thick CA glue - amzn.to/3DYIMfx
O3 Adhesive Accelerator - amzn.to/3zwtehH
Dave Stanton Dog Locks (UK) - etsy.com/uk/listing/1324340248
Other handy gear:-
Bosch 10.8v drill/driver [similar] - amzn.to/3tQAEJ0
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
In this one I make a couple of quick and simple clamp racks, and in the process re-discover 5 tools and accessories that are truly the unsung heroes of the workshop. Enjoy!
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
If Clamps Fight Back, Make A Rack! - youtu.be/uyJZ-lQ0LHw
5 Basic Clamps - youtu.be/kfWIsh-X8HQ
Matchfit Microjig dovetail clamps - youtu.be/uiT6F-K26Tg
Festool vs Cheap Tool, MFT clamps - youtu.be/mG5siTVitUw
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured in this video (other brands are available)
3M 9088 strong double-sided tape - amzn.to/3u2Ekqw
‘Everyday’ double-sided tape - amzn.to/3th16eL
Trend Snappy flip bit set - amzn.to/3AtMSLL
Bosch Multipurpose drill bit set - amzn.to/3ToAMdi
Bosch green hammer drill (similar, not £5 anymore!) - amzn.to/3UodZiZ
Cheap corded hammer drill (choice) - amzn.to/3NXRTSm
03 Adhesive thick CA glue - amzn.to/3DYIMfx
O3 Adhesive Accelerator - amzn.to/3zwtehH
Dave Stanton Dog Locks (UK) - etsy.com/uk/listing/1324340248
Other handy gear:-
Bosch 10.8v drill/driver [similar] - amzn.to/3tQAEJ0
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
![2 Clamp Racks & 5 Unsung (workshop) Heroes [video 509]](https://i.ytimg.com/vi/qJ4niRhu4zY/hqdefault.jpg "2 Clamp Racks & 5 Unsung (workshop) Heroes [video 509]
In this one I make a couple of quick and simple clamp racks, and in the process re-discover 5 tools and accessories that are truly the unsung heroes of the workshop. Enjoy!
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
If Clamps Fight Back, Make A Rack! - https://youtu.be/uyJZ-lQ0LHw
5 Basic Clamps - https://youtu.be/kfWIsh-X8HQ
Matchfit Microjig dovetail clamps - https://youtu.be/uiT6F-K26Tg
Festool vs Cheap Tool, MFT clamps - https://youtu.be/mG5siTVitUw
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured in this video (other brands are available)
3M 9088 strong double-sided tape - https://amzn.to/3u2Ekqw
‘Everyday’ double-sided tape - https://amzn.to/3th16eL
Trend Snappy flip bit set - https://amzn.to/3AtMSLL
Bosch Multipurpose drill bit set - https://amzn.to/3ToAMdi
Bosch green hammer drill (similar, not £5 anymore!) - https://amzn.to/3UodZiZ
Cheap corded hammer drill (choice) - https://amzn.to/3NXRTSm
03 Adhesive thick CA glue - https://amzn.to/3DYIMfx
O3 Adhesive Accelerator - https://amzn.to/3zwtehH
Dave Stanton Dog Locks (UK) - https://www.etsy.com/uk/listing/1324340248/
Other handy gear:-
Bosch 10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)")
![First Look: #Benchdogs Ultra #MFT Workstation! [video 579]](https://i.ytimg.com/vi/qZK7BWI-PH0/hqdefault.jpg "First Look: #Benchdogs Ultra #MFT Workstation! [video 579]
Something a little different this week as I abandon the 10MinuteWorkshop for a trip to the Somerset countryside to take a first look at the brand new Benchdogs Ultra MFT Workstation.
As a Benchdogs affiliate I may receive a small commission on qualifying sales at no cost to yourself, so many thanks if you do. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
See the tech specs of the Ultra MFT Workstation here - https://benchdogs.co.uk/collections/ultra-mft-workstation?ref=1x_p0bagtnr
Bundle pricing with fence and hinge system now available here - https://benchdogs.co.uk/collections/ultra-mft-workstation/products/ultra-mft-workstation-bundle-pre-order-shipping-oct-2024?ref=1x_p0bagtnr
View the full Benchdogs Fence systems here - https://benchdogs.co.uk/collections/fence-systems-1?ref=1x_p0bagtnr
Benchdogs Quad rail hinge here - https://benchdogs.co.uk/collections/hinge-system?ref=1x_p0bagtnr
Table of Contents:
00:00 Introduction
00:30 Full workstation strip down
04:52 Ultra MFT core
06:00 Alternative MFTs
06:47 Size, weight...
07:42 Wheel set option
08:35 Hinge compatibility
10:20 Ultra MFT basic - whats missing?
11:40 Ultra MFT Ultimate - Valchromat
12:31 1-minute stripdown
14:19 Outro & thanks
Related content:
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Portable Bench Build - https://youtu.be/7OqrljJHOaw
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Extrusion Confusion - A Guide To MFT Hardware - https://youtu.be/za5B-XrSuH0
3 MFT jigs, 3 MFT tops - https://youtu.be/iAIZQsXPXR4
SauterShop VarioBench - https://youtu.be/0Cs092FZW3U
MFT top replacement - https://youtu.be/09an8aZrTqs
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
LR32 MFT - https://youtu.be/C_J-PKrUo1Y
The Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![Little Plywood Boxes - a basic build [video 495]](https://i.ytimg.com/vi/qg1jdYy0QTE/hqdefault.jpg "Little Plywood Boxes - a basic build [video 495]
In this video I make a set of small #BirchPly #boxes from recycled / upcycled #LooseTenonJigs using only a simple toolset - an entry-level plunge saw, a hammer and nails and a set of cheap chisels. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest:-
Plywood shelves, a basic build - https://youtu.be/gNobuRCBr_Q
Basic Plywood Boxes - https://youtu.be/li5AIXw3XPE
Torsion box router bench - https://youtu.be/Q-Vyq4ShHT0
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Two £79 saws - https://youtu.be/Ebm-EEXNZHE
Flat-pack CNC Loose Tenon Jig - https://youtu.be/1dcI7amQisA
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Benchdogs FenceDogs - https://youtu.be/DezSQjhcbbk
Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Note that prices fluctuate - some have risen since I made my purchases.
Triton 48t blade - https://amzn.to/2EQgUMJ
Cheap chisels [similar] - https://amzn.to/3NFmCTm (US: [similar] https://amzn.to/386DYZ4)
Macallister plunge saw - available in the UK from B&Q stores at diy.com
10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
20mm conduit - https://www.toolstation.com/20mm-heavy-duty-pvc-round-conduit/p71029
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Peanut 2 MiniJig Revised - and revisited! [video 474][**Gifted/Ad]](https://i.ytimg.com/vi/r38uEEUkx0w/hqdefault.jpg "Peanut 2 MiniJig Revised - and revisited! [video 474][**Gifted/Ad]
In this video I take a look at the revised and now #Domino compatible #Peanut2 #MiniJig from Intelligent Fixings. Enjoy!
**This video may contain items that were supplied/gifted for review. This is not a sponsored video, I have not been paid to make this video or say nice things about the product; as an affiliate I may earn from qualifying sales, so thank you for using the links below if making a purchase.
Timecodes
0:00 Intro
0:45 Peanut 2 recap
1:58 Peanut 2 revised features
6:26 Member thanks
7:23 Loose tenon cutting
9:38 Joint assembly
10:35 Upgrade options
+++++++++
Peanut 2 Mini Jig bundle at IF - https://shop.intelligentfixings.com/products/peanut-mini-jig-complete-set?ref=10minuteworkshop
Intelligent Fixings on YouTube - https://www.youtube.com/channel/UCk4S-y5jUNpWNBV4mcy8CHQ
Peanut 2 Mini Jig bundle at Axminster Tools - https://www.tagserve.com/clickServlet?AID=2805&MID=485&PID=691&SID=3464&CID=1965&SUBID=&TARGETURL=https://www.axminstertools.com/peanut-2-mini-jig-complete-package-107760?utm_source=tag&utm_medium=affiliates&utm_content={TAG.AID}
Axminster tools on YouTube - https://www.youtube.com/user/axminstertoolcentre
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Non-UK distribution:-
US/Canada distributor - https://www.richelieu.com/intl/en/ ( Richelieu - products will become available soon)
German distributor - https://www.dictum.com/en/ (Dictum)
South Africa distributor - https://hwconline.co.za (Hardware Centre)
France distributor - https://www.foussier.fr (Foussier)
+++++++++
Peanut 2 System & Projects playlist - https://bit.ly/Peanut2system
Other videos mentioned:-
Cabinetry Basics P3 - https://youtu.be/iKle2JqhEV8
Basic Plywood boxes - https://youtu.be/li5AIXw3XPE
10 Years of Domino - https://youtu.be/7oxd2Qnvyw0
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connectors - https://amzn.to/2mV8OJu (US:https://amzn.to/2LKRDZ1)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)")
![[AD**]In this one I’m taking a look at the new @evolutionpowertools rail connectors.](https://i.ytimg.com/vi/rgsjgy4jK7Y/hqdefault.jpg "[AD**]In this one I’m taking a look at the new @evolutionpowertools rail connectors.
[AD**]In this one I’m taking a look at the new guiderail joining bars from @evolutionpowertools
**Paid partnership with @evolutionppowertools_uk, thank you so much for early access to the products.")
![Loose Tenon Jig Plus [video 493]](https://i.ytimg.com/vi/s79rc8yzbLQ/hqdefault.jpg "Loose Tenon Jig Plus [video 493]
In this video is it my pleasure to introduce the latest 10MinuteWorkshop Loose #Tenon Jig, the LTJ+. Though functionally similar to the original #LooseTenon #Jig, the ‘plus’ is bigger, and it does more. Bigger, so it’s easier to use with larger routers, with wings for easier clamping and a clamping area ‘safe zone’ that’s clearly marked, and with rows of guide bush holes that makes boring holes on 32mm centres a breeze - perfect for shelf pins. Enjoy!
2023 update; this jig and the original were discontinued pending the launch of the latest veraion, the LTJ30, which is available at the 10MinuteWorkshop store at 10minute.shop, or follow the link on the ‘merchant shelf’ directly below the video.
+++++
Other videos mentioned:-
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
Flat-pack CNC Loose tenon Jig - https://youtu.be/1dcI7amQisA
Loose Tenon basics - https://youtu.be/t86QGUn7dAI
+++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
18mm Guide Bush (3D printed) for OF1010 router - https://etsy.me/3OuHYn8
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool Midi bluetooth extractor - https://amzn.to/3q29VXI (US: 🤷♂️)
Festool bluetooth remote - https://amzn.to/3s4yHcB (US: 🤷♂️)
1/4” shank x 5mm Carbide spiral upcut bit - https://www.rennietool.co.uk/collections/solid-carbide-router-bits/products/solid-carbide-2-flute-up-cut-spiral-router-bits-on-a-1-4-shank?variant=32477353640023&aff=2
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA")
![Is This The Ultimate Countersink Bit? [video 578]](https://i.ytimg.com/vi/sFqyRk-uDRI/hqdefault.jpg "Is This The Ultimate Countersink Bit? [video 578]
In this one we’re talking countersinks vs counterbores and comparing the cheap and cheerful ‘Rosehead’ countersinks to the more spendy ‘no flute’ deburring countersinks.
Table of Contents:
00:00 Introduction
00:36 Screws and fixings
01:13 Overview
01:37 Rosehead countersink
02:22 Why a clean countersink matters
02:45 Deburring countersink
03:39 Just use a bigger drill!
04:07 Counterbores
04:25 Plug & cutter set
04:57 Coverboard tip
05:51 Conclusion
Related content:
One Smaller Stool - https://youtu.be/KDe7ZQO83mE
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
DIY drilling Guide - https://youtu.be/TglP1kHDjSw
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Trend snappy Deburring tool (countersink) - https://amzn.to/3Xw6b3c
Fisch deburring tool (countersink) - https://amzn.to/4emJDrG
Rosehead countersink - https://amzn.to/3KL960x
Pilot bit and countersink set - https://amzn.to/45LVcVH
Plug and cutter set - https://amzn.to/3VIXDVn
Bosch Pro 30mm Forstner bit - https://amzn.to/3VtxM3E
Bosch Pro 20mm Forstner bit - https://amzn.to/4eckb8q
Fisch 5mmm lip & spur / brad point bit - https://amzn.to/4aNq9th
Fisch 8mm lip & spur / brad point bit- https://amzn.to/4e6tKFN
KWB Drillblock - https://amzn.to/3V8IhrW
Thin plywood sheets - https://amzn.to/45e2npm
Tailors’ awl - https://amzn.to/4aBHCVx")
![Pocket-money Rail Hinge [video 497]](https://i.ytimg.com/vi/sHj5G6t1qvY/hqdefault.jpg "Pocket-money Rail Hinge [video 497]
In this video I make a #plywood #guiderail #hinge that scratches a few itches the other hinges don’t quite reach. Enjoy.
Plans available in my Etsy store at 10minute.shop
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Ikea Curtain-track MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Festool or Mafell https://youtu.be/5kqui1b0SbU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Festool rail bar or ‘Feather Key’ part #450592 (no screws supplied)
Stu Parker 3D printed version - https://www.etsy.com/uk/shop/Stuparkercreations
As a Benchdogs UK affiliate I may earn from qualifying sales; use the offer code “10minuteworkshop” for a 5% discount across the board at Benchdogs.co.uk.
Benchdogs carpenter’s square - https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Gift List 2022 [**Gifted/Ad] [video 510]](https://i.ytimg.com/vi/sZgLxykEQJY/hqdefault.jpg "Gift List 2022 [**Gifted/Ad] [video 510]
Hi everybody and welcome to the Gifts for Makers video, where I go through a few #gift #ideas for the folks who are good with their hands. Because we may be feeling the squeeze a bit more this year - and if we’re not, the folks buying for us may be - I’m concentrating on items that are a little less spendy, and if nothing on this list tickles your fancy, then maybe take a look at one of the previous videos, links down below as always. 👍
+++++
Visit my store at 10Minute.shop for the 10MinuteWorkshop range of products and digital plans
Give the gift of 10MW Plus membership with a 10Minuteworkshop Plus gift card - https://www.10minuteworkshop.com/gift-card
+++++
Gifts to receive 2017 P1 https://youtu.be/Mma0Cysf3hw
Gifts to receive 2017 P2 https://youtu.be/0zgHBdGNkFU
Gifts for Makers 2018 P1 https://youtu.be/4PKLI4DbGb
Gifts for makers 2018 P2 https://youtu.be/Izy_oKLqXwY
Gifts for Makers 2019 - https://youtu.be/8YDUxFPVnkY
Gifts for Makers 2020 - https://youtu.be/83H1PxwmwqE
Gifts for Makers 2021 - https://youtu.be/3GXYkXVAGBc
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video; as an affiliate I may earn from qualifying sales.
.
Support the channel and receive a 5% discount across the board at Benchdogs (link below) by using the offer code “10minuteworkshop” at checkout.
Support the channel and receive 10% discount across the board at O3 Adhesives (links below) by using the offer code 10minuteworkshop at checkout.
Featured in this video:-
Hinge drilling guide - https://amzn.to/3GuSMQA
Tailors Awl, or ‘scratch’ or ‘tickers’ Awl - https://amzn.to/3i06QaE
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ (US - https://amzn.to/3hVicMV)
SanderCard - https://amzn.to/3Xn7lM4 (US - https://amzn.to/3OoHQ8R)
Rhodia spiral-bound dot book A5 (£7) & A4 £12) - A5 - https://amzn.to/3tqwMyD, A4 - https://amzn.to/3EsbxTi (US: A4+ only in dot https://amzn.to/3UWPpGf)
Keith Brown clear wax - https://www.etsy.com/uk/listing/1314396026/kb-oil-wax-wood-finish-clear-250ml-non
Benchdogs MFT stoppers - https://benchdogs.co.uk/collections/new-products/products/mft-plugs-magnetic-stainless-steel?ref=1x_p0bagtnr
** New**
03 Adhesive thick CA glue and O3 Adhesive Accelerator - Save 10% on O3 Adhesives with offer code 10MinuteWorkshop at checkout, link below!
https://www.o3adhesives.co.uk/?sca_ref=2935180.i6dkKK25CM
**NEW**
Chestnut Spirit stains - https://amzn.to/3EiaPIc (sample pack - https://amzn.to/3G822K7) sample pack of all 9 colours around £28
Hampshire Sheen Intrinsic colours - water-based dyes - https://amzn.to/3tuR8qc - sample pack about £35, 11 colours and a Danish oil
Robin Clevett hinge jig - https://www.robc.co.uk/product/the-102mm-hinge-jig-uk-only-copy/
Dave Stanton Dog Locks - https://www.etsy.com/uk/listing/1324340248/
Stu Parker creations - Guidrail bar attachment for my DIY rail hinge, 18mm guide bush for the OF1010 https://www.etsy.com/uk/shop/Stuparkercreations
Sixpence industries rail stay - https://amzn.to/3E0pSVw
GloForce Eye-light - https://amzn.to/3TEDr2G
Smallrig magic arm (Male/małe connector required) - https://amzn.to/3Oie5ql (US: https://amzn.to/3guPPVn)
Bessey horizontal fixture clamp WNS-SET-MFT - https://www.google.com/search?q=bessey+horizontal+fixture+clamp
Visit my store at 10Minute.shop for the 10MinuteWorkshop range of products and digital plans
Give the gift of 10MW Plus membership with a 10Minuteworkshop Plus gift card - https://www.10minuteworkshop.com/gift-card")
