Peter Millard | Loose Tenon Jig Plus [video 493] @10MinuteWorkshop | Uploaded 2 years ago | Updated 1 hour ago
In this video is it my pleasure to introduce the latest 10MinuteWorkshop Loose #Tenon Jig, the LTJ+. Though functionally similar to the original #LooseTenon #Jig, the ‘plus’ is bigger, and it does more. Bigger, so it’s easier to use with larger routers, with wings for easier clamping and a clamping area ‘safe zone’ that’s clearly marked, and with rows of guide bush holes that makes boring holes on 32mm centres a breeze - perfect for shelf pins. Enjoy!
2023 update; this jig and the original were discontinued pending the launch of the latest veraion, the LTJ30, which is available at the 10MinuteWorkshop store at 10minute.shop, or follow the link on the ‘merchant shelf’ directly below the video.
+++++
Other videos mentioned:-
Ultimate DIY loose-tenon jig - youtu.be/IzKHZe0YCGY
Flat-pack CNC Loose tenon Jig - youtu.be/1dcI7amQisA
Loose Tenon basics - youtu.be/t86QGUn7dAI
+++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - 10minuteworkshop.com/links
+++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
18mm Guide Bush (3D printed) for OF1010 router - etsy.me/3OuHYn8
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool Midi bluetooth extractor - amzn.to/3q29VXI (US: 🤷♂️)
Festool bluetooth remote - amzn.to/3s4yHcB (US: 🤷♂️)
1/4” shank x 5mm Carbide spiral upcut bit - rennietool.co.uk/collections/solid-carbide-router-bits/products/solid-carbide-2-flute-up-cut-spiral-router-bits-on-a-1-4-shank?variant=32477353640023&aff=2
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Bessey DuoKlamp - amzn.to/3eDz1Ig (US: amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
In this video is it my pleasure to introduce the latest 10MinuteWorkshop Loose #Tenon Jig, the LTJ+. Though functionally similar to the original #LooseTenon #Jig, the ‘plus’ is bigger, and it does more. Bigger, so it’s easier to use with larger routers, with wings for easier clamping and a clamping area ‘safe zone’ that’s clearly marked, and with rows of guide bush holes that makes boring holes on 32mm centres a breeze - perfect for shelf pins. Enjoy!
2023 update; this jig and the original were discontinued pending the launch of the latest veraion, the LTJ30, which is available at the 10MinuteWorkshop store at 10minute.shop, or follow the link on the ‘merchant shelf’ directly below the video.
+++++
Other videos mentioned:-
Ultimate DIY loose-tenon jig - youtu.be/IzKHZe0YCGY
Flat-pack CNC Loose tenon Jig - youtu.be/1dcI7amQisA
Loose Tenon basics - youtu.be/t86QGUn7dAI
+++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - 10minuteworkshop.com/links
+++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
18mm Guide Bush (3D printed) for OF1010 router - etsy.me/3OuHYn8
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool Midi bluetooth extractor - amzn.to/3q29VXI (US: 🤷♂️)
Festool bluetooth remote - amzn.to/3s4yHcB (US: 🤷♂️)
1/4” shank x 5mm Carbide spiral upcut bit - rennietool.co.uk/collections/solid-carbide-router-bits/products/solid-carbide-2-flute-up-cut-spiral-router-bits-on-a-1-4-shank?variant=32477353640023&aff=2
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Bessey DuoKlamp - amzn.to/3eDz1Ig (US: amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
![Loose Tenon Jig Plus [video 493]](https://i.ytimg.com/vi/s79rc8yzbLQ/hqdefault.jpg "Loose Tenon Jig Plus [video 493]
In this video is it my pleasure to introduce the latest 10MinuteWorkshop Loose #Tenon Jig, the LTJ+. Though functionally similar to the original #LooseTenon #Jig, the ‘plus’ is bigger, and it does more. Bigger, so it’s easier to use with larger routers, with wings for easier clamping and a clamping area ‘safe zone’ that’s clearly marked, and with rows of guide bush holes that makes boring holes on 32mm centres a breeze - perfect for shelf pins. Enjoy!
2023 update; this jig and the original were discontinued pending the launch of the latest veraion, the LTJ30, which is available at the 10MinuteWorkshop store at 10minute.shop, or follow the link on the ‘merchant shelf’ directly below the video.
+++++
Other videos mentioned:-
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
Flat-pack CNC Loose tenon Jig - https://youtu.be/1dcI7amQisA
Loose Tenon basics - https://youtu.be/t86QGUn7dAI
+++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
18mm Guide Bush (3D printed) for OF1010 router - https://etsy.me/3OuHYn8
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool Midi bluetooth extractor - https://amzn.to/3q29VXI (US: 🤷♂️)
Festool bluetooth remote - https://amzn.to/3s4yHcB (US: 🤷♂️)
1/4” shank x 5mm Carbide spiral upcut bit - https://www.rennietool.co.uk/collections/solid-carbide-router-bits/products/solid-carbide-2-flute-up-cut-spiral-router-bits-on-a-1-4-shank?variant=32477353640023&aff=2
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA")
![Is This The Ultimate Countersink Bit? [video 578]](https://i.ytimg.com/vi/sFqyRk-uDRI/hqdefault.jpg "Is This The Ultimate Countersink Bit? [video 578]
In this one we’re talking countersinks vs counterbores and comparing the cheap and cheerful ‘Rosehead’ countersinks to the more spendy ‘no flute’ deburring countersinks.
Table of Contents:
00:00 Introduction
00:36 Screws and fixings
01:13 Overview
01:37 Rosehead countersink
02:22 Why a clean countersink matters
02:45 Deburring countersink
03:39 Just use a bigger drill!
04:07 Counterbores
04:25 Plug & cutter set
04:57 Coverboard tip
05:51 Conclusion
Related content:
One Smaller Stool - https://youtu.be/KDe7ZQO83mE
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
DIY drilling Guide - https://youtu.be/TglP1kHDjSw
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Trend snappy Deburring tool (countersink) - https://amzn.to/3Xw6b3c
Fisch deburring tool (countersink) - https://amzn.to/4emJDrG
Rosehead countersink - https://amzn.to/3KL960x
Pilot bit and countersink set - https://amzn.to/45LVcVH
Plug and cutter set - https://amzn.to/3VIXDVn
Bosch Pro 30mm Forstner bit - https://amzn.to/3VtxM3E
Bosch Pro 20mm Forstner bit - https://amzn.to/4eckb8q
Fisch 5mmm lip & spur / brad point bit - https://amzn.to/4aNq9th
Fisch 8mm lip & spur / brad point bit- https://amzn.to/4e6tKFN
KWB Drillblock - https://amzn.to/3V8IhrW
Thin plywood sheets - https://amzn.to/45e2npm
Tailors’ awl - https://amzn.to/4aBHCVx")
![Pocket-money Rail Hinge [video 497]](https://i.ytimg.com/vi/sHj5G6t1qvY/hqdefault.jpg "Pocket-money Rail Hinge [video 497]
In this video I make a #plywood #guiderail #hinge that scratches a few itches the other hinges don’t quite reach. Enjoy.
Plans available in my Etsy store at 10minute.shop
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Ikea Curtain-track MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Festool or Mafell https://youtu.be/5kqui1b0SbU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Festool rail bar or ‘Feather Key’ part #450592 (no screws supplied)
Stu Parker 3D printed version - https://www.etsy.com/uk/shop/Stuparkercreations
As a Benchdogs UK affiliate I may earn from qualifying sales; use the offer code “10minuteworkshop” for a 5% discount across the board at Benchdogs.co.uk.
Benchdogs carpenter’s square - https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Gift List 2022 [**Gifted/Ad] [video 510]](https://i.ytimg.com/vi/sZgLxykEQJY/hqdefault.jpg "Gift List 2022 [**Gifted/Ad] [video 510]
Hi everybody and welcome to the Gifts for Makers video, where I go through a few #gift #ideas for the folks who are good with their hands. Because we may be feeling the squeeze a bit more this year - and if we’re not, the folks buying for us may be - I’m concentrating on items that are a little less spendy, and if nothing on this list tickles your fancy, then maybe take a look at one of the previous videos, links down below as always. 👍
+++++
Visit my store at 10Minute.shop for the 10MinuteWorkshop range of products and digital plans
Give the gift of 10MW Plus membership with a 10Minuteworkshop Plus gift card - https://www.10minuteworkshop.com/gift-card
+++++
Gifts to receive 2017 P1 https://youtu.be/Mma0Cysf3hw
Gifts to receive 2017 P2 https://youtu.be/0zgHBdGNkFU
Gifts for Makers 2018 P1 https://youtu.be/4PKLI4DbGb
Gifts for makers 2018 P2 https://youtu.be/Izy_oKLqXwY
Gifts for Makers 2019 - https://youtu.be/8YDUxFPVnkY
Gifts for Makers 2020 - https://youtu.be/83H1PxwmwqE
Gifts for Makers 2021 - https://youtu.be/3GXYkXVAGBc
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video; as an affiliate I may earn from qualifying sales.
.
Support the channel and receive a 5% discount across the board at Benchdogs (link below) by using the offer code “10minuteworkshop” at checkout.
Support the channel and receive 10% discount across the board at O3 Adhesives (links below) by using the offer code 10minuteworkshop at checkout.
Featured in this video:-
Hinge drilling guide - https://amzn.to/3GuSMQA
Tailors Awl, or ‘scratch’ or ‘tickers’ Awl - https://amzn.to/3i06QaE
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ (US - https://amzn.to/3hVicMV)
SanderCard - https://amzn.to/3Xn7lM4 (US - https://amzn.to/3OoHQ8R)
Rhodia spiral-bound dot book A5 (£7) & A4 £12) - A5 - https://amzn.to/3tqwMyD, A4 - https://amzn.to/3EsbxTi (US: A4+ only in dot https://amzn.to/3UWPpGf)
Keith Brown clear wax - https://www.etsy.com/uk/listing/1314396026/kb-oil-wax-wood-finish-clear-250ml-non
Benchdogs MFT stoppers - https://benchdogs.co.uk/collections/new-products/products/mft-plugs-magnetic-stainless-steel?ref=1x_p0bagtnr
** New**
03 Adhesive thick CA glue and O3 Adhesive Accelerator - Save 10% on O3 Adhesives with offer code 10MinuteWorkshop at checkout, link below!
https://www.o3adhesives.co.uk/?sca_ref=2935180.i6dkKK25CM
**NEW**
Chestnut Spirit stains - https://amzn.to/3EiaPIc (sample pack - https://amzn.to/3G822K7) sample pack of all 9 colours around £28
Hampshire Sheen Intrinsic colours - water-based dyes - https://amzn.to/3tuR8qc - sample pack about £35, 11 colours and a Danish oil
Robin Clevett hinge jig - https://www.robc.co.uk/product/the-102mm-hinge-jig-uk-only-copy/
Dave Stanton Dog Locks - https://www.etsy.com/uk/listing/1324340248/
Stu Parker creations - Guidrail bar attachment for my DIY rail hinge, 18mm guide bush for the OF1010 https://www.etsy.com/uk/shop/Stuparkercreations
Sixpence industries rail stay - https://amzn.to/3E0pSVw
GloForce Eye-light - https://amzn.to/3TEDr2G
Smallrig magic arm (Male/małe connector required) - https://amzn.to/3Oie5ql (US: https://amzn.to/3guPPVn)
Bessey horizontal fixture clamp WNS-SET-MFT - https://www.google.com/search?q=bessey+horizontal+fixture+clamp
Visit my store at 10Minute.shop for the 10MinuteWorkshop range of products and digital plans
Give the gift of 10MW Plus membership with a 10Minuteworkshop Plus gift card - https://www.10minuteworkshop.com/gift-card")
![Loose Tenon Basics [video 481]](https://i.ytimg.com/vi/t86QGUn7dAI/hqdefault.jpg "Loose Tenon Basics [video 481]
In this video I go through the #basics of loose tenons, I compare them to more traditional mortice and tenon joints, give an honourable mention to dowels, and naturally, take a quick look at the #Festool #Domino. Enjoy!
.
My thanks to Paul at Steel City Drone Pilot for the use of his Stonehenge footage. Paul is a professional drone pilot of many years experience, and is very familiar with the legalities and restrictions that come with flying drones in areas where the public may have access.
Watch Steel City Drone Pilot on YouTube here - https://www.youtube.com/c/STEELCITYDRONEPILOT
On instagram - @steelcitydronepilot
Website - https://steelcitydronepilot.co.uk
+++++++++
Register your interest for the 10 Minute Workshop Loose Tenon Jig here - https://bit.ly/10MWLTJ_register
NB: this is not a pre-order, there is no commitment to purchase; you’re simply adding your name to a list to be notified when available.
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
Dowel Jig Basics - https://youtu.be/zTj_hiEVfvw
10 years of Domino - https://youtu.be/7oxd2Qnvyw0
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Other handy gear:-
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Benchdogs precision triangle/square (Gifted) - https://bit.ly/precisiontriangle
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Liberon beeswax - http://amzn.to/2zTixUU (US:http://amzn.to/2zklbal)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
+++++++++")
![Oak and Birch ply drawers - too good for the workshop? [video 558]](https://i.ytimg.com/vi/tIbJ-93TMZw/hqdefault.jpg "Oak and Birch ply drawers - too good for the workshop? [video 558]
In this one I make some #workshop #drawers with #oak fronts - eventually! Honestly, it’s a shaky start but we get there in the end - enjoy!
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free Simple Drawer Construction factsheet, included in the next issue!
Can’t wait? Become a 10minuteworkshop Plus member and get the free factsheet and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Top Drawer! - https://youtu.be/HcNRId9a3Lw
Workshop Cabinet with Modular Storage https://youtu.be/Ybhnnqro4Cs
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Birch ply drawer router cabinet - https://youtu.be/BfV0426rog0
Baltic Birch Basics - https://youtu.be/GRMpFTuq_V0
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
It’s not good, it’s great! - https://youtu.be/28mywqdvXq4
Benchdogs CSC SYS Fence System - https://youtu.be/QmQW4YbCT3I
All About Drawers playlist - https://bit.ly/AllAboutDrawers
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Benchdogs products gifted without obligation:-
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr")
![Cabinet Door Sizing [*Ad] [video 549]](https://i.ytimg.com/vi/tyeGTD9aF4E/hqdefault.jpg "Cabinet Door Sizing [*Ad] [video 549]
Hi hope you’re well. So the ‘industry standard’ used in kitchen fits and the like are that doors should be the carcass height minus 5mm, and the carcass width, minus 4 mm, and that works well for most folks in the business. But as bespoke makers I don’t think it’s unreasonable to aim for something with slightly higher tolerances and tighter shut-lines, and this is how I do mine. Enjoy!
[*Ad] Like those previous videos this one is sponsored by Medite. You know Medite, they make top quality MDF, and every painted set of shelves, bookcases, wardrobes , cabinets or doors you may have seen me make on this channel was made with Medite MR or Moisture Resistant MDF, and in this video I’m using Medite’s ultimate MRMDF, Medite Optima.
Visit meditesmartply - links below - for more information on the product and stockists, and I’d like to thank Medite for the opportunity to use Optima on this project.
https://mdfosb.com/en/products/medite-optima?utm_campaign=MEDITE&utm_source=YouTube&utm_medium=Peter_millard
https://www.meditemakesitreal.com/?utm_campaign=MEDITE&utm_source=YouTube&utm_medium=Peter_millard
++++++++
Sign up for the newsletter at 10minuteworkshop.email or 10MW.email and get the free ‘Door Gaps’ fact sheet.
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Base Cabinet Basics - https://youtu.be/XQNeiPvEQ1I
Raised Panel Doors - https://youtu.be/94TGcWe7PBI
Concealed hinges - https://youtu.be/-Y6MEQlFEhQ
All about doors playlist - http://bit.ly/AllAboutDoors
All about hinges playlist - http://bit.ly/allabouthinges
Shaker-style cabinet doors - https://youtu.be/Px3D7wqycUc
Two easy doors - https://youtu.be/jwGvYsvdCg4
Previous series, Cabinetry Basics P1 - https://youtu.be/3N_T-YpkBCg
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
10MW Loose Tenon Jig 30 - https://youtu.be/enGVfEwD-Tc
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
All About Drawers playlist - https://bit.ly/AllAboutDrawers
Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Jointing systems playlist - http://bit.ly/JointingSystems
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Blum 71B3550 hinge & cruciform plate set - https://amzn.to/40jfcfx
Blum 71B3750 (inset) hinges - https://amzn.to/3FI62zG
Blum standard ‘cruciform’ hinge plate - search for Blum 173L6100
Blum 173H7100 cam adjuster hinge plate - https://amzn.to/3shQfV6
Kreg hinge jig - https://amzn.to/2zyqQr7
Hinge drilling guide - http://amzn.to/2oYBHqk
Self-centering drill bit - https://amzn.to/3tUY9UN
Bradawl - https://amzn.to/45USN9p
I used the panel raising bit from Wealden tool - https://bit.ly/PanelRaisingBit
And their 1/4” grooving bit - https://bit.ly/SmallGroovingBit
Adjustable cabinet feet - https://amzn.to/3FigrSf
SpacePlugs -https://amzn.to/3S1Xtaf")
![Why Buy This Saw? [video 516]](https://i.ytimg.com/vi/u7H5On0j_5c/hqdefault.jpg "Why Buy This Saw? [video 516]
With a decent budget available how do you decide what #tablesaw to buy? After the recent vlog I had a lot of folks ask me what the other saws were that I considered on the path that led me to the dinky little #Festool #cordless trim saw, so I thought I’d do a quick talking head video about how it came about, and what my reasons were. Enjoy!
NB: I am not affiliated in any way with any of the above brands, and prices quoted are ‘street prices’ as of February 2023.
The restored Startrite TA 145 is still available; let me know if you’re interested and I can put you in touch - location is colchester, Essex.
NB: There are many “table saws” available, covering many aspects of woodworking with pros and cons to each type, and the ones I mentioned in this video are as follows:-
Site saws - Bosch GTS 10, DeWalt 745, Hikoki 36v, Milwaukee Cordless.
240v 16A Cabinet saws - SIP 01332 and Itech 01332, Axminster AP254PS13
240v 13A cabinet saws - Laguna Fusion 2, Charnwood W629, Charnwood W650
240v Lumberjack 10” cast iron ‘hybrid’ saw
Cast iron bench top saw - Axminster Workshop AW254TS
Cast iron cabinet saw - Axminster Professional AP254LTS
18v cordless Festool CSC SYS 50
Google them for more details.
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Sean in the Shed Lumberjack saw review - https://www.youtube.com/watch?v=aNP-ZJ-nVDI
Badger Matt Axminster saw review - https://youtu.be/v4jG7qDbQ7o
Keith Brown table saw search - https://youtu.be/p1M7U-4JBvA
Paoson cast iron saw vs site saw - https://youtu.be/rh35NacsCR8
Paoson saw bench build - https://youtu.be/TSDRfrB_0BE
Dave Stanton SawStop - https://youtu.be/8mfxSCb-qS0
Cheap & Easy Tracksaw Mitre Jig - https://youtu.be/2SwGl5pzGHY
Mondrian-style table - https://youtu.be/bq7amS5MkPI
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Storage Cubes - https://youtu.be/Gyv-oGKRF30
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop")
![Matchfit Microjig Dovetail Clamps [**Gifted/Ad] [video 499]](https://i.ytimg.com/vi/uiT6F-K26Tg/hqdefault.jpg "Matchfit Microjig Dovetail Clamps [**Gifted/Ad] [video 499]
In this video I turn my Workshop MFT into a hybrid #Matchfit #MFT, and take a tour around the Matchfit Dovetail clamp system from #MicroJig. Enjoy!
** The Matchfit Dovetail clamp system from MicroJig was supplied for review by Wood Workers Workshop. I have not been paid to make this video or say nice things about the product. As a WWW Affiliate, I may earn from qualifying sales; use the offer code “10minuteworkshop” at checkout for a 5% discount off all MicroJig products from Wood Workers Workshop, discount code valid for 30 days.
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
MFT Playlist - all my MFT & MFT-related videos in one place - http://bit.ly/MFT-related
Ikea Curtain-track MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Festool or Mafell https://youtu.be/5kqui1b0SbU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
MicroJig Matchfit Dovetail clamp Pro kit - https://woodworkersworkshop.co.uk/micro-jig-matchfit-dovetail-clamp-pro/?ref=YUDlxZ4f
X-Pad set - https://woodworkersworkshop.co.uk/micro-jig-matchfit-x-pad-4-pack/?ref=YUDlxZ4f
Relief Bit - https://woodworkersworkshop.co.uk/micro-jig-matchfit-relief-router-bit-1-2-shank/?ref=YUDlxZ4f
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
MFT, MFT top, Festool MFT, Festool MFT Table, woodwork, tracksaw, plungesaw, track saw, plunge saw, MFT Bench, router, Clamps, clamping")
![Cabinetry Basics P4 [Video 438]](https://i.ytimg.com/vi/urMoCGpzZTc/hqdefault.jpg "Cabinetry Basics P4 [Video 438]
I get a lot of questions about #cabinet and #carcass #construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, in Part 2 I went through the most basic methods of joining the sides to the top & base, in Part 3 I looked at seven different types of hidden fixings, and in this concluding Part 4 I discuss wether you should fit a back, and how they should be hung on the wall…
Part 1 is here - https://youtu.be/3N_T-YpkBCg
Part 2 is here - https://youtu.be/LPGH_BhIzZg
Part 3 is here - https://youtu.be/iKle2JqhEV8
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Mentioned in this video:-
Keyhole hanging plates (similar) https://amzn.to/3advhcW (US: (similar) https://amzn.to/3ovQHXJ)
Corner plate - https://amzn.to/3raoiZh (US: Nope, sorry 🤷♂️)
Cabinet hanging bracket wall plate - https://amzn.to/3adybOS (US: (complete bracket) https://amzn.to/2NLPWx7)
Grooving bit - https://amzn.to/3rc9LMJ (US: (OUCH!) https://amzn.to/36nx9Pa)
14mm straight bit for hanging plate - https://amzn.to/3pB8sX3 (US: https://amzn.to/2MhCBwd)
Self-centering bit is a Trend snappy one from this set - https://amzn.to/38FuzpO (US: (single bit) https://amzn.to/36tzTe1)
Ryobi air strike narrow crown stapler - https://amzn.to/3h6Mo2E (US: https://amzn.to/3283zeI)
Dowel jig kit - https://amzn.to/36FLdnx (US:[similar] https://amzn.to/3a0HKjX)
8 x 30mm dowels - https://amzn.to/38yb16J (US:[3/8th] https://amzn.to/2KJAKQ5)
Lamello Biscuits - https://amzn.to/39fuNnv (US: https://amzn.to/367dEKL)
Aldi Ferrex biscuit jointer no longer available
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connector set - https://amzn.to/2mV8OJu (US:https://amzn.to/2LKRDZ1)
Lamello Zeta P2 - https://amzn.to/2Xpu5vB (US: https://amzn.to/2Kufuv1)
Lamello Clamex P-14 https://amzn.to/2Wkm922 (US: ??)
Peanut 2 connector system - http://shop.intelligentfixings.com?ref=10minuteworkshop
Lamello Tenso P-14 - https://amzn.to/2Z5i4eX (US: woah - are these not available in the US??)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
