Peter Millard | Cabinetry Basics P4 [Video 438] @10MinuteWorkshop | Uploaded 3 years ago | Updated 1 hour ago
I get a lot of questions about #cabinet and #carcass #construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, in Part 2 I went through the most basic methods of joining the sides to the top & base, in Part 3 I looked at seven different types of hidden fixings, and in this concluding Part 4 I discuss wether you should fit a back, and how they should be hung on the wall…
Part 1 is here - youtu.be/3N_T-YpkBCg
Part 2 is here - youtu.be/LPGH_BhIzZg
Part 3 is here - youtu.be/iKle2JqhEV8
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - 10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at 10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
++++++++
Mentioned in this video:-
Keyhole hanging plates (similar) amzn.to/3advhcW (US: (similar) amzn.to/3ovQHXJ)
Corner plate - amzn.to/3raoiZh (US: Nope, sorry 🤷♂️)
Cabinet hanging bracket wall plate - amzn.to/3adybOS (US: (complete bracket) amzn.to/2NLPWx7)
Grooving bit - amzn.to/3rc9LMJ (US: (OUCH!) amzn.to/36nx9Pa)
14mm straight bit for hanging plate - amzn.to/3pB8sX3 (US: amzn.to/2MhCBwd)
Self-centering bit is a Trend snappy one from this set - amzn.to/38FuzpO (US: (single bit) amzn.to/36tzTe1)
Ryobi air strike narrow crown stapler - amzn.to/3h6Mo2E (US: amzn.to/3283zeI)
Dowel jig kit - amzn.to/36FLdnx (US:[similar] amzn.to/3a0HKjX)
8 x 30mm dowels - amzn.to/38yb16J (US:[3/8th] amzn.to/2KJAKQ5)
Lamello Biscuits - amzn.to/39fuNnv (US: amzn.to/367dEKL)
Aldi Ferrex biscuit jointer no longer available
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connector set - amzn.to/2mV8OJu (US:amzn.to/2LKRDZ1)
Lamello Zeta P2 - amzn.to/2Xpu5vB (US: amzn.to/2Kufuv1)
Lamello Clamex P-14 amzn.to/2Wkm922 (US: ??)
Peanut 2 connector system - http://shop.intelligentfixings.com?ref=10minuteworkshop
Lamello Tenso P-14 - amzn.to/2Z5i4eX (US: woah - are these not available in the US??)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - amzn.to/2G9eFVd (US: amzn.to/2GduBpo)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)
I get a lot of questions about #cabinet and #carcass #construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, in Part 2 I went through the most basic methods of joining the sides to the top & base, in Part 3 I looked at seven different types of hidden fixings, and in this concluding Part 4 I discuss wether you should fit a back, and how they should be hung on the wall…
Part 1 is here - youtu.be/3N_T-YpkBCg
Part 2 is here - youtu.be/LPGH_BhIzZg
Part 3 is here - youtu.be/iKle2JqhEV8
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - 10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at 10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
++++++++
Mentioned in this video:-
Keyhole hanging plates (similar) amzn.to/3advhcW (US: (similar) amzn.to/3ovQHXJ)
Corner plate - amzn.to/3raoiZh (US: Nope, sorry 🤷♂️)
Cabinet hanging bracket wall plate - amzn.to/3adybOS (US: (complete bracket) amzn.to/2NLPWx7)
Grooving bit - amzn.to/3rc9LMJ (US: (OUCH!) amzn.to/36nx9Pa)
14mm straight bit for hanging plate - amzn.to/3pB8sX3 (US: amzn.to/2MhCBwd)
Self-centering bit is a Trend snappy one from this set - amzn.to/38FuzpO (US: (single bit) amzn.to/36tzTe1)
Ryobi air strike narrow crown stapler - amzn.to/3h6Mo2E (US: amzn.to/3283zeI)
Dowel jig kit - amzn.to/36FLdnx (US:[similar] amzn.to/3a0HKjX)
8 x 30mm dowels - amzn.to/38yb16J (US:[3/8th] amzn.to/2KJAKQ5)
Lamello Biscuits - amzn.to/39fuNnv (US: amzn.to/367dEKL)
Aldi Ferrex biscuit jointer no longer available
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connector set - amzn.to/2mV8OJu (US:amzn.to/2LKRDZ1)
Lamello Zeta P2 - amzn.to/2Xpu5vB (US: amzn.to/2Kufuv1)
Lamello Clamex P-14 amzn.to/2Wkm922 (US: ??)
Peanut 2 connector system - http://shop.intelligentfixings.com?ref=10minuteworkshop
Lamello Tenso P-14 - amzn.to/2Z5i4eX (US: woah - are these not available in the US??)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - amzn.to/2G9eFVd (US: amzn.to/2GduBpo)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)
![Cabinetry Basics P4 [Video 438]](https://i.ytimg.com/vi/urMoCGpzZTc/hqdefault.jpg "Cabinetry Basics P4 [Video 438]
I get a lot of questions about #cabinet and #carcass #construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, in Part 2 I went through the most basic methods of joining the sides to the top & base, in Part 3 I looked at seven different types of hidden fixings, and in this concluding Part 4 I discuss wether you should fit a back, and how they should be hung on the wall…
Part 1 is here - https://youtu.be/3N_T-YpkBCg
Part 2 is here - https://youtu.be/LPGH_BhIzZg
Part 3 is here - https://youtu.be/iKle2JqhEV8
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Mentioned in this video:-
Keyhole hanging plates (similar) https://amzn.to/3advhcW (US: (similar) https://amzn.to/3ovQHXJ)
Corner plate - https://amzn.to/3raoiZh (US: Nope, sorry 🤷♂️)
Cabinet hanging bracket wall plate - https://amzn.to/3adybOS (US: (complete bracket) https://amzn.to/2NLPWx7)
Grooving bit - https://amzn.to/3rc9LMJ (US: (OUCH!) https://amzn.to/36nx9Pa)
14mm straight bit for hanging plate - https://amzn.to/3pB8sX3 (US: https://amzn.to/2MhCBwd)
Self-centering bit is a Trend snappy one from this set - https://amzn.to/38FuzpO (US: (single bit) https://amzn.to/36tzTe1)
Ryobi air strike narrow crown stapler - https://amzn.to/3h6Mo2E (US: https://amzn.to/3283zeI)
Dowel jig kit - https://amzn.to/36FLdnx (US:[similar] https://amzn.to/3a0HKjX)
8 x 30mm dowels - https://amzn.to/38yb16J (US:[3/8th] https://amzn.to/2KJAKQ5)
Lamello Biscuits - https://amzn.to/39fuNnv (US: https://amzn.to/367dEKL)
Aldi Ferrex biscuit jointer no longer available
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connector set - https://amzn.to/2mV8OJu (US:https://amzn.to/2LKRDZ1)
Lamello Zeta P2 - https://amzn.to/2Xpu5vB (US: https://amzn.to/2Kufuv1)
Lamello Clamex P-14 https://amzn.to/2Wkm922 (US: ??)
Peanut 2 connector system - http://shop.intelligentfixings.com?ref=10minuteworkshop
Lamello Tenso P-14 - https://amzn.to/2Z5i4eX (US: woah - are these not available in the US??)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
![If Clamps Fight Back - Make A Rack! [video 459]](https://i.ytimg.com/vi/uyJZ-lQ0LHw/hqdefault.jpg "If Clamps Fight Back - Make A Rack! [video 459]
In this video I tackle some overdue workshop organisation, and try to make sense of the mess of clamps that I’ve accumulated. Time to make a rack - or two - I think, and these ones have a little twist in the construction. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
Peanut vs Tenso - https://youtu.be/0RuO_jljpTA
Peanut Mini Jig - https://youtu.be/DsvpAjGizKs
DIY Peanut Jig - https://youtu.be/jhhCnv9rW0M
Workshop shelves & cabinets - https://youtu.be/iaB_CL5md8U
Fan in a can - https://youtu.be/DcuIU4WsiWA
+++++++++
For gift ideas, visit my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Irwin quick grip clamps - https://amzn.to/3eF8ZV3 (US: https://amzn.to/3tMuJmh)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Aluminium sash clamp - https://amzn.to/3o7jwLG (US: [similar - link for reference, crazy price!] https://amzn.to/3hhqz2S)
F clamp [similar] - https://amzn.to/2RHbSvm (US: [similar] https://amzn.to/3bj3ARq)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Whats The Point of a Joint? [video 538]](https://i.ytimg.com/vi/vGDUBy5mx78/hqdefault.jpg "Whats The Point of a Joint? [video 538]
As I mentioned in the previous video I’m drifting towards a couple of small projects that involve a little bit of basic joinery, and in the run-up to that, I’m trying to plan a couple of videos that help explain the process; there’ll be a ‘Which joint when’ type of video, and probably a ‘5 basic joints and how to fake them’ but in this video I want to try and explain what it is we’re trying to do by joining a couple of pieces of timber or board together.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
It’s not good - it’s great! - https://youtu.be/28mywqdvXq4
Strong, or Strong enough? - https://youtu.be/6jRqt1HBHsM
Tracksaw Picture Frame - https://youtu.be/UuWLWT-ZKTg
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Basic Builds playlist - https://bit.ly/BasicBuilds
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Handy consumables & gear:-
Festool CSCSYS50 [price hike!!] - https://amzn.to/3X6tnD1
Festool OF1400 - https://amzn.to/3Q7SljY
Festool CTL Midi vac with bluetooth - https://amzn.to/3q9RnZK
Bluetooth button (worth every penny!) - https://amzn.to/3DtSYfZ")
![Easy, accurate, repeatable tracksaw cuts. [video 550]](https://i.ytimg.com/vi/vHX5j2820nk/hqdefault.jpg "Easy, accurate, repeatable tracksaw cuts. [video 550]
In this shorter video I’m sharing a technique I’ve developed for making repeatable tracksaw cuts that are quick, easy and accurate just using accessories you already have. Enjoy!
++++++++
Sign up for the newsletter at 10minuteworkshop.email or 10MW.email for free factsheets and lots more
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Base Cabinet Basics - https://youtu.be/XQNeiPvEQ1I
All about doors playlist - http://bit.ly/AllAboutDoors
All about hinges playlist - http://bit.ly/allabouthinges
Two easy doors - https://youtu.be/jwGvYsvdCg4
Cabinetry Basics P1 - https://youtu.be/3N_T-YpkBCg
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
10MW Loose Tenon Jig 30 - https://youtu.be/enGVfEwD-Tc
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
All About Drawers playlist - https://bit.ly/AllAboutDrawers
Jointing systems playlist - http://bit.ly/JointingSystems
+++++++++
Useful links:
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs carpenter’s square (gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
Benchdogs precision triangle/square (gifted) - https://bit.ly/precisiontriangle
Hultafors Talmeter tape measure - https://amzn.to/3rdewuP
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![$10 Tool Tote [video 567]](https://i.ytimg.com/vi/vhW04TJCgMU/hqdefault.jpg "$10 Tool Tote [video 567]
In this one I’m making a simple little plywood #tool-tote with a twist - the bottom tray can be left behind, or with literally a 180 turn it can be picked up in the stack, and the whole things fits in a #Festool t-loc #systainer, too. Enjoy!
Like the look of the 10MinuteWorkshop MultiJig? Register an interest at www.10minutejigs.com (redirects) or directly at https://tenminuteworkshop.myflodesk.com/is2eafpl87
+++++++++
Join the 10MinuteWorkshop Plus community, more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch and get the all the 10MW factsheets, included in the next issue.
Can’t wait? Become a 10minuteworkshop Plus member* and get the factsheets, free plans and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for the DIY SYS-TOTE plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Sealey does it again - https://youtu.be/6dDVX5Pxsrk
Festool ETSEC 150/5 - https://youtu.be/Hieq1PTITWI
Tracksaw Launchpad - https://youtu.be/z8Jp9oSXGh4
Oak and Birch ply drawers - https://youtu.be/tIbJ-93TMZw
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Benchdogs products gifted without obligation:-
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (
Silverline 18g nailer - https://amzn.to/3sfcZ2S
18g nail mixed pack - https://amzn.to/3lGRIfW
Silverline nailer/stapler - https://amzn.to/3rGorF4
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle")
![Workshop Clearout & Basic Wall Cabinets [video 461]](https://i.ytimg.com/vi/vthcuwE6bM4/hqdefault.jpg "Workshop Clearout & Basic Wall Cabinets [video 461]
You know how you start something sometimes and it gets a little out of hand? Yeah, that. So I’m having a bit of a #workshop #clearout and #makeover, and in this video I deal with some wall cabinets, with shelves to follow. Enjoy!
Oh, yeah - and while those MDF shelves are plenty strong enough, I dont actually recommend hanging off them unless youre 100% positive of the fixing into the wall. 👍
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned / recent popular videos:-
Workshop shelves & cabinets - https://youtu.be/iaB_CL5md8U
Basic Plywood Boxes - https://youtu.be/li5AIXw3XPE
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
+++++++++
For gift ideas, visit my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Corner brackets/plates - https://amzn.to/3WblNFa (US: https://amzn.to/3iDCsTV)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Marking out - not so basic! [video 588]](https://i.ytimg.com/vi/vyGpC4HoZgU/hqdefault.jpg "Marking out - not so basic! [video 588]
Following on from Marking Out Basics, in this one I share my process for marking out cabinet components that arent designed to make life easy. Enjoy!
Table of Contents:
00:00 Introduction
01:15 Its still a cabinet...
02:54 Marking centres
04:17 Marking sides
05:30 Top & base
07:26 Shelf centres
08:21 Outro
Related content:
Marking Out Basics - https://youtu.be/YZ3ExdMX82A
Base cabinet basics - https://bit.ly/BaseCabBasics
Cabinetry basics - http://bit.ly/CabinetryBasics
Jointing systems - http://bit.ly/JointingSystems
Cabinet tips - http://bit.ly/CabinertTips
All about doors - http://bit.ly/AllAboutDoors
Client work, bedroom furniture - http://bit.ly/ClientBedroomFurniture
Client work, shelves and storage - http://bit.ly/ClientShelvesAndStorage
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
No going back (Our Big Build primer) - https://youtu.be/eULepp_7CIM
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Bahco combi squares - https://amzn.to/3B6tbwL
Hinge template (saddle square) - https://amzn.to/4gurF7G")
![Tablesaw or Tracksaw for Narrow Rips [video 477]](https://i.ytimg.com/vi/wYy2VUhBxYI/hqdefault.jpg "Tablesaw or Tracksaw for Narrow Rips [video 477]
In this video I’m going over that old chestnut of tablesaw vs tracksaw, but specifically in the context of narrow rips, where you’d expect the tablesaw to come out on top. But not always… enjoy!
.
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
Painting MDF Doors - https://youtu.be/ZIwNJGlVtwc
Concealed hinges - https://youtu.be/-Y6MEQlFEhQ
Tricky Tracksaw Cuts - https://youtu.be/ybSSZ5R31aI
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Strawbyte waste side jigs - http://bit.ly/Strawbyte_jigs
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Other useful gear:-
Benchdogs precision triangle/square (Gifted) - https://bit.ly/precisiontriangle
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Liberon beeswax - http://amzn.to/2zTixUU (US:http://amzn.to/2zklbal)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![My £80 Mini-me MFT [video 581]](https://i.ytimg.com/vi/wtaUuaV54Xk/hqdefault.jpg "My £80 Mini-me MFT [video 581]
OK, last #MFT * / bench video for a little while I promise, but I couldn’t resist giving this £80 #MFT-style portable bench a try; I mean, how bad could it be??
*MultiFunction Table, after Festool’s #MFT/1080 and MFT/3
Table of Contents:
00:00 Introduction
00:41 Overview
01:51 Accessories
03:00 Bench dog surprise
04:41 Competitors?
05:25 Likes & dislikes
08:44 Conclusion
09:25 Next steps
Related content:
Other videos and playlists of interest:-
Metabos £200/$250 MFT - https://youtu.be/aWozkUUDdc8
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Benchdogs Ultra MFT Workstation First Look - https://youtu.be/qZK7BWI-PH0
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Portable Bench Build - https://youtu.be/7OqrljJHOaw
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Extrusion Confusion - A Guide To MFT Hardware - https://youtu.be/za5B-XrSuH0
3 MFT jigs, 3 MFT tops - https://youtu.be/iAIZQsXPXR4
SauterShop VarioBench - https://youtu.be/0Cs092FZW3U
MFT top replacement - https://youtu.be/09an8aZrTqs
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
LR32 MFT - https://youtu.be/C_J-PKrUo1Y
The Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Newsletter and memberships:
Sign up for the free monthly newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
All my portable workbenches in one list - https://amzn.to/4csRhOW
Excel Folding Workbench - https://amzn.to/4fIhKLs
Vevor folding workbench - https://amzn.to/4dmGC9M
Note that the Vevor bench appears to have fixed-height legs, not adjustable height like the excel.")
![DIY MFT vlog-style follow-on [video 488]](https://i.ytimg.com/vi/wyGNs1GYdCk/hqdefault.jpg "DIY MFT vlog-style follow-on [video 488]
In this short vlog-style follow-on video, I introduce the plans for the recent MFT build, and I chat about thriftier options to get all the MFT goodness without the hefty price-tag. Enjoy!
DIY MFT plans on my Etsy here - http://bit.ly/10minuteShop
p.s. if you liked this, I do a vlog-style video like this every week for my Patreon supporters - link below... 👍
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest
Badger Workshop MFT top - https://www.youtube.com/watch?v=vH-ETYbJZpI
Hand-i-craft Bench - https://www.youtube.com/watch?v=USbM0oGUBmQ
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
3 Easy Wins; New Benchtops - https://youtu.be/XVSp9yDmGYM
LR32MFT - https://youtu.be/C_J-PKrUo1Y
Benchdogs FenceDogs - https://youtu.be/DezSQjhcbbk
Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
Sautershop Variobench - https://youtu.be/0Cs092FZW3U
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
MFT top replacement - https://youtu.be/09an8aZrTqs
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Benchtop is Finsa Fibracolour in anthracite. Google it.
Benchdogs Fence - https://benchdogs.co.uk/collections/fence-systems/products/1000mm-fence-system-mk2-lever?ref=1x_p0bagtnr
Dashboard bracket set - https://dashboardpws.com/products/guide-rail-brackets-set
Ikea Vidga triple track - https://www.ikea.com/gb/en/p/vidga-triple-track-rail-included-ceiling-fittings-white-70492886/
Rutlands T-Track - https://www.rutlands.com/sp+jig-making-t-tracks-t-tracks-t-track-83mm-x-1000mm-pack-of-2-rutlands®+r8002x2
Rutlands t-track accessory set ** NB: NOT M8 ** - https://www.rutlands.com/sp+t-track-hardware-kit-60-piece-19mm-and-83mm+R8018
Ooznest V-slot 8020 - https://ooznest.co.uk/product/v-slot-linear-rail-20x80mm-cut-to-size/
KJN 8040 (10mm slot) - https://www.aluminium-profile.co.uk/40x80l-aluminium-profile-kjn993130
Because of the way the Festool catalogue works I cant link to the items directly, but the parts numbers are listed below, and if you search for those links should pop up for you to order them as spare parts.
497022 Support - this is the front rail support
497023 Support unit - this is the hinge part at the back of the MFT for the rail
472862 Profile - this is the MFT/3 aluminium profile
455242 Profile - this is the Festool 1080 aluminium profile
M8 female Star knobs - https://amzn.to/3LVwqYQ
M8 t-bolts - https://www.axminstertools.com/ujk-technology-t-slot-bolts-m8-x-50mm-pkt-10-105455?queryID=c7f0ac929a77509334ab8a2818bfa498
M5 t-nuts - https://amzn.to/3v8Bd2T
M5 male knobs - https://amzn.to/3sno1pn
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
+++++++++")
![I make 5 basic woodwork joints [video 539]](https://i.ytimg.com/vi/x7XkdWApAQE/hqdefault.jpg "I make 5 basic woodwork joints [video 539]
In this one I make 5 basic woodwork joints and explain when you might want to use them, and on which projects. Enjoy.
#basicwoodworking #easywoodworking #woodworkingjoints
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
What’s the Point of a Joint? - https://youtu.be/vGDUBy5mx78
It’s not good - it’s great! - https://youtu.be/28mywqdvXq4
Strong, or Strong enough? - https://youtu.be/6jRqt1HBHsM
Tracksaw Picture Frame - https://youtu.be/UuWLWT-ZKTg
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Basic Builds playlist - https://bit.ly/BasicBuilds
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Handy consumables & gear:-
Festool CSCSYS50 [price hike!!] - https://amzn.to/3X6tnD1
Festool OF1400 - https://amzn.to/3Q7SljY
Festool CTL Midi vac with bluetooth - https://amzn.to/3q9RnZK
Bluetooth button (worth every penny!) - https://amzn.to/3DtSYfZ")
![Design is how it works, not how it looks [AD][video 582]](https://i.ytimg.com/vi/x9MIQw8nWEE/hqdefault.jpg "Design is how it works, not how it looks [AD][video 582]
This video is sponsored by Woodworkers Guild of America. The first 1,000 people to use my link will get a full year of Premium membership to Woodworkers Guild of America for only $1.49 - https://go.wwgoa.com/petermillard/
In this one I use an ongoing project to discuss the three-way pull of Form, Function and Fabrication, the design considerations we need to take when making anything for ourselves, or clients.
Legacy video is from member content; join the conversation as a 10minuteworkshop Plus member, details below.
Design is how it works... is an old Steve Jobs quote.
Table of Contents:
00:00 Introduction
00:40 Ikea Bekvam - a design classic
01:21 Design considerations
02:12 First prototype
02:45 Construction - joints or not?
03:22 A false start
03:50 WWGOA ad read
05:35 Looks good, but doesnt work
06:40 Design changes
07:35 Function, fabrication, but form??
08:11 Work in progress...
08:47 6 space-saving stools...
Related content:
Other videos and playlists of interest:-
Making Ikea’s Bekvam - https://youtu.be/JLUXW6_oNAw
No going back (Our Big Build primer) - https://youtu.be/eULepp_7CIM
Making Plans (Our Big Build 2) - https://youtu.be/Gd9RVXruLbk
Breaking Ground (Big Build 3) - https://youtu.be/MNleO7MwrhY
Which joint when? - https://youtu.be/x7XkdWApAQE
5 Fake Joints - https://youtu.be/V1nWpH6EyL4
One Smaller Stool - https://youtu.be/KDe7ZQO83mE
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
