Uploaded November 2026 | Updated November 2026, 2 days ago
In Day 7 of our carport workshop build here in the Philippines, we take a close look at wall progress, concrete block work, door framing, and plastering. More importantly, we break down a critical construction lesson every expat and homeowner needs to know: why paying workers per job rather than per day can save you money, headaches, and endless delays. We also discuss provincial minimum wage labor rates versus city contractor rates and how to manage build timelines effectively.
Timestamps:
0:00 - Day 7 Kickoff & Contractor Update
1:16 - Workshop Scope & Carport Layout
2:13 - Plastering & Upper Block Work
3:08 - Why You Never Pay Construction Daily Rates
4:50 - Midday Inspection & Wall Progress
5:47 - Checking the Door Hardware & Boxes
9:20 - End of Day 7 Walkthrough
10:10 - Pay Per Job vs. Daily Rates in the Philippines
11:32 - Provincial Labor Rates Explained
12:35 - Lawn Maintenance & What’s Next
#PhilippinesConstruction #ExpatLifePhilippines #LivingInThePhilippines #HomeBuildPhilippines #DIYWorkshop #ProvincialLife
In Day 7 of our carport workshop build here in the Philippines, we take a close look at wall progress, concrete block work, door framing, and plastering. More importantly, we break down a critical construction lesson every expat and homeowner needs to know: why paying workers per job rather than per day can save you money, headaches, and endless delays. We also discuss provincial minimum wage labor rates versus city contractor rates and how to manage build timelines effectively.
Timestamps:
0:00 - Day 7 Kickoff & Contractor Update
1:16 - Workshop Scope & Carport Layout
2:13 - Plastering & Upper Block Work
3:08 - Why You Never Pay Construction Daily Rates
4:50 - Midday Inspection & Wall Progress
5:47 - Checking the Door Hardware & Boxes
9:20 - End of Day 7 Walkthrough
10:10 - Pay Per Job vs. Daily Rates in the Philippines
11:32 - Provincial Labor Rates Explained
12:35 - Lawn Maintenance & What’s Next
#PhilippinesConstruction #ExpatLifePhilippines #LivingInThePhilippines #HomeBuildPhilippines #DIYWorkshop #ProvincialLife







![How to Fix Low Water Pressure & Clean Filters | Expat in the Philippines
In this video, Jason from Our Life In The Philippines provides a comprehensive guide on maintaining and optimizing a home water filtration system. He shares his personal mistakes, such as using the wrong line sizes and brands, and demonstrates a DIY backwash manifold system designed to extend filter life and improve water pressure.
Key Takeaways for Home Water Maintenance
• Size Matters: Ensure your filter housing matches your main line size. Jason explains how switching from a 3/4 line to 1/2 filters restricted his homes water pressure [01:19].
• Brand Comparison: He recommends Smos filters over Voda due to the Smos brands superior rubber O-rings and brass fittings, which prevent the leaks common in plastic-ported models [01:36].
• DIY Backwash System: Learn how to build a manifold that allows you to reverse the water flow (backwashing) to flush out sediment and sand without removing the filters [07:24].
• Filter Washability: Discover how many disposable pre-filters (pleated and string types) can actually be washed and reused, saving significant maintenance costs [22:50].
Video Chapters & Timestamps
• [00:14] Common Mistakes: Why buying the wrong filter size (1/2 vs 3/4) kills your water pressure.
• [01:36] Equipment Recommendations: Comparing Voda and Smos filter housings and O-ring quality.
• [03:04] Current Filter Setup: An overview of Jason’s 4-stage filtration manifold.
• [04:01] Pre-Filter Types: Comparing foam (5 micron), pleated paper (5 micron), and string (1 micron) filters.
• [05:23] Installation Tip: How to identify the top vs bottom of a carbon filter [05:36].
• [07:24] Backwash Strategy: Designing a T-junction and valve system for easy cleaning.
• [10:02] The Pump House: A look at the 75-gallon air-over-water pressure tank and its operation.
• [12:35] Fixing Leaks: Addressing issues caused by insufficient plumbers tape on plastic-to-brass fittings.
• [15:39] Testing the Backwash: The first trial of the reverse-flow cleaning system.
• [19:08] Pressure Tank Maintenance: How to drain sediment and repressurize the tank [19:51].
• [23:02] Filter Removal: Using the filter wrench and checking the condition of dirty filters.
• [25:24] Washing Filters: A demonstration of how well pleated and string filters clean up with just a garden hose.
• [26:41] Reinstallation: Tips for aligning the gaskets and nipples inside the filter canisters.
• [29:22] System Restart: Refilling the canisters and bleeding the air out of the lines [30:11].
#PhilippinesExpat #WaterFilter #Citihardware #SaveMoney #DIYPhilippines #ExpatLife #WaterPressure How to Fix Low Water Pressure & Clean Filters | Expat in the Philippines](https://i.ytimg.com/vi/uoe1jRdiVKQ/mqdefault.jpg)


