Uploaded October 2026 | Updated November 2026, 2 days ago
Are you dealing with unsightly cracks in your concrete or drywall? In this step-by-step DIY tutorial, we show you how to properly prep, fill, seal, and finish wall cracks so they don't reappear. Whether you're maintaining a home in the Philippines or doing basic property upkeep, this straightforward method saves money and protects your structure.
Timestamps:
00:00 Why concrete cracks in the Philippines
00:46 Inspecting the hairline crack & scraping it open
01:57 Prepping with masking tape & choosing wall putty
02:26 Applying putty deep into the crack
03:44 Letting the putty dry & mixing paint
05:00 Tool overview & sanding the patched wall
07:00 Painting the trim & wall with roller
07:40 Bonus fix: Removing blinds & teaching Butchoy how to patch holes
09:37 Final results & wrap-up
Tools & Materials Needed:
Putty knife / scraper
Masonry crack filler / joint compound
sandpaper (120 & 220 grit)
Primer and touch-up paint
If you found this guide helpful, don't forget to like, subscribe, and share your home repair questions in the comments!
#HomeImprovement #DIYHomeRepair #ConcreteRepair #WallRepair #DIYPhilippines
Are you dealing with unsightly cracks in your concrete or drywall? In this step-by-step DIY tutorial, we show you how to properly prep, fill, seal, and finish wall cracks so they don't reappear. Whether you're maintaining a home in the Philippines or doing basic property upkeep, this straightforward method saves money and protects your structure.
Timestamps:
00:00 Why concrete cracks in the Philippines
00:46 Inspecting the hairline crack & scraping it open
01:57 Prepping with masking tape & choosing wall putty
02:26 Applying putty deep into the crack
03:44 Letting the putty dry & mixing paint
05:00 Tool overview & sanding the patched wall
07:00 Painting the trim & wall with roller
07:40 Bonus fix: Removing blinds & teaching Butchoy how to patch holes
09:37 Final results & wrap-up
Tools & Materials Needed:
Putty knife / scraper
Masonry crack filler / joint compound
sandpaper (120 & 220 grit)
Primer and touch-up paint
If you found this guide helpful, don't forget to like, subscribe, and share your home repair questions in the comments!
#HomeImprovement #DIYHomeRepair #ConcreteRepair #WallRepair #DIYPhilippines






![How to Fix Low Water Pressure & Clean Filters | Expat in the Philippines
In this video, Jason from Our Life In The Philippines provides a comprehensive guide on maintaining and optimizing a home water filtration system. He shares his personal mistakes, such as using the wrong line sizes and brands, and demonstrates a DIY backwash manifold system designed to extend filter life and improve water pressure.
Key Takeaways for Home Water Maintenance
• Size Matters: Ensure your filter housing matches your main line size. Jason explains how switching from a 3/4 line to 1/2 filters restricted his homes water pressure [01:19].
• Brand Comparison: He recommends Smos filters over Voda due to the Smos brands superior rubber O-rings and brass fittings, which prevent the leaks common in plastic-ported models [01:36].
• DIY Backwash System: Learn how to build a manifold that allows you to reverse the water flow (backwashing) to flush out sediment and sand without removing the filters [07:24].
• Filter Washability: Discover how many disposable pre-filters (pleated and string types) can actually be washed and reused, saving significant maintenance costs [22:50].
Video Chapters & Timestamps
• [00:14] Common Mistakes: Why buying the wrong filter size (1/2 vs 3/4) kills your water pressure.
• [01:36] Equipment Recommendations: Comparing Voda and Smos filter housings and O-ring quality.
• [03:04] Current Filter Setup: An overview of Jason’s 4-stage filtration manifold.
• [04:01] Pre-Filter Types: Comparing foam (5 micron), pleated paper (5 micron), and string (1 micron) filters.
• [05:23] Installation Tip: How to identify the top vs bottom of a carbon filter [05:36].
• [07:24] Backwash Strategy: Designing a T-junction and valve system for easy cleaning.
• [10:02] The Pump House: A look at the 75-gallon air-over-water pressure tank and its operation.
• [12:35] Fixing Leaks: Addressing issues caused by insufficient plumbers tape on plastic-to-brass fittings.
• [15:39] Testing the Backwash: The first trial of the reverse-flow cleaning system.
• [19:08] Pressure Tank Maintenance: How to drain sediment and repressurize the tank [19:51].
• [23:02] Filter Removal: Using the filter wrench and checking the condition of dirty filters.
• [25:24] Washing Filters: A demonstration of how well pleated and string filters clean up with just a garden hose.
• [26:41] Reinstallation: Tips for aligning the gaskets and nipples inside the filter canisters.
• [29:22] System Restart: Refilling the canisters and bleeding the air out of the lines [30:11].
#PhilippinesExpat #WaterFilter #Citihardware #SaveMoney #DIYPhilippines #ExpatLife #WaterPressure How to Fix Low Water Pressure & Clean Filters | Expat in the Philippines](https://i.ytimg.com/vi/uoe1jRdiVKQ/mqdefault.jpg)



