Uploaded November 2026 | Updated November 2026, 3 days ago
Can a locally running AI agent build an entire home server on its own? I put the Olares One to the test, running a local 35B AI model with Hermes to remotely install, configure and troubleshoot a complete home media and personal cloud server. All of the AI processing runs locally, without relying on cloud inference APIs. Here's how well it worked, what went wrong and what I still needed to do myself.
ADDITIONAL INFORMATION
---------------------------------------------------
Get Your Own Olares One with $300 Off - https://mklements.short.gy/olaresone$300off
Visit my blog for the project write-up and additional information - the-diy-life.com/using-a-locally-running-ai-agent-to-build-an-entire-home-server
Full home media server manual setup guide with terminal commands on GitHub - github.com/mklements/homemediaserver
PURCHASE LINKS
---------------------------------------------------
Olares One - https://mklements.short.gy/olaresone$300off
GMKtec Nucbox G5 - https://link.amazon/B09jbBZFY
500GB SSD - https://link.amazon/B06GAF4SI
USB to SATA Adaptor (Cheap) - https://link.amazon/B0eAbMtlr
USB to SATA Adaptor (Good Quality) - https://link.amazon/B03Ubhke5
Beelink ME Mini - https://link.amazon/B0b6VWIAP
Zimaboard 2 - https://link.amazon/B0iSCbK91
Tools & Equipment Used:
USB C Pencil Screwdriver - amzn.to/4lWg5Ec
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
1:28 Olares One
3:17 Test Setup
4:14 Initial Setup
5:53 Troubleshooting
7:41 It Works!
8:42 Image Generation
9:28 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
Can a locally running AI agent build an entire home server on its own? I put the Olares One to the test, running a local 35B AI model with Hermes to remotely install, configure and troubleshoot a complete home media and personal cloud server. All of the AI processing runs locally, without relying on cloud inference APIs. Here's how well it worked, what went wrong and what I still needed to do myself.
ADDITIONAL INFORMATION
---------------------------------------------------
Get Your Own Olares One with $300 Off - https://mklements.short.gy/olaresone$300off
Visit my blog for the project write-up and additional information - the-diy-life.com/using-a-locally-running-ai-agent-to-build-an-entire-home-server
Full home media server manual setup guide with terminal commands on GitHub - github.com/mklements/homemediaserver
PURCHASE LINKS
---------------------------------------------------
Olares One - https://mklements.short.gy/olaresone$300off
GMKtec Nucbox G5 - https://link.amazon/B09jbBZFY
500GB SSD - https://link.amazon/B06GAF4SI
USB to SATA Adaptor (Cheap) - https://link.amazon/B0eAbMtlr
USB to SATA Adaptor (Good Quality) - https://link.amazon/B03Ubhke5
Beelink ME Mini - https://link.amazon/B0b6VWIAP
Zimaboard 2 - https://link.amazon/B0iSCbK91
Tools & Equipment Used:
USB C Pencil Screwdriver - amzn.to/4lWg5Ec
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
1:28 Olares One
3:17 Test Setup
4:14 Initial Setup
5:53 Troubleshooting
7:41 It Works!
8:42 Image Generation
9:28 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.










