Uploaded March 2022 | Updated September 2026, 1 week ago
In this video, we're going to be designing and laser cutting some new Raspberry Pi cases from 3mm plywood using the Atomstack X7 40W. This is a new laser engraving and cutting machine from Atomstack which is largely the same as their flagship X7 Pro, but with a slightly lower power, 40W laser.
The Atomstack X7 40W is currently available at a reduced price of $399.99 (regular price $459.99) - bit.ly/36RCr8T
ADDITIONAL INFORMATION
---------------------------------------------------
Visit my blog for the written build - the-diy-life.com/making-laser-cut-raspberry-pi-cases-using-the-atomstack-x7-40w
Visit Atomstack's website to browse their range of laser cutters & engravers - atomstack.net
How to Design a Case in Inkscape - youtu.be/Sd9NRY723do
PURCHASE LINKS
---------------------------------------------------
Atomstack X7 40W - bit.ly/36RCr8T
3mm Plywood - amzn.to/36LYIEV
Raspberry Pi 4B - amzn.to/3IXMTZT
40mm RGB 5V Fan - amzn.to/3DgiHYm
40mm Black 5V Fan - amzn.to/36ClXS1
M2.5 Brass Standoffs - amzn.to/3IJSS48
M2.5 Screws and Nuts - amzn.to/3wIqT2k
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
1:12 Assembly & Testing
2:43 Basic Plywood Case Cutting
4:03 Basic Plywood Case Assembly
6:08 Patterned Case Cutting
7:17 Patterned Case Assembly
9:59 Finished Cases
10:47 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
In this video, we're going to be designing and laser cutting some new Raspberry Pi cases from 3mm plywood using the Atomstack X7 40W. This is a new laser engraving and cutting machine from Atomstack which is largely the same as their flagship X7 Pro, but with a slightly lower power, 40W laser.
The Atomstack X7 40W is currently available at a reduced price of $399.99 (regular price $459.99) - bit.ly/36RCr8T
ADDITIONAL INFORMATION
---------------------------------------------------
Visit my blog for the written build - the-diy-life.com/making-laser-cut-raspberry-pi-cases-using-the-atomstack-x7-40w
Visit Atomstack's website to browse their range of laser cutters & engravers - atomstack.net
How to Design a Case in Inkscape - youtu.be/Sd9NRY723do
PURCHASE LINKS
---------------------------------------------------
Atomstack X7 40W - bit.ly/36RCr8T
3mm Plywood - amzn.to/36LYIEV
Raspberry Pi 4B - amzn.to/3IXMTZT
40mm RGB 5V Fan - amzn.to/3DgiHYm
40mm Black 5V Fan - amzn.to/36ClXS1
M2.5 Brass Standoffs - amzn.to/3IJSS48
M2.5 Screws and Nuts - amzn.to/3wIqT2k
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
1:12 Assembly & Testing
2:43 Basic Plywood Case Cutting
4:03 Basic Plywood Case Assembly
6:08 Patterned Case Cutting
7:17 Patterned Case Assembly
9:59 Finished Cases
10:47 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
