Uploaded July 2022 | Updated September 2026, 1 week ago
In this edition of HobbyKing's Mod Tech Monday, Stuart is here to go over steps to repaint the new Durafly (PNF) Gloster Gladiator Mk1 Biplane Fighter into a "Norweigian" paint scheme. Stay tuned for the next parts of this series
The Durafly Gloster Gladiator Painting and Weathering Part 1 Blog Article: bit.ly/3yxZpfd
The Durafly Gloster Gladiator Painting and Weathering Part 2 Blog Article: bit.ly/3VlAczs
The Gloster Gladiator was a British-built biplane fighter, it was used by the Royal Air Force and Fleet Air Arm during the late 1930s. It was the RAF's last, and ultimate biplane fighter airplane to be manufactured, but it was also the first to feature an enclosed cockpit.
Get the Durafly (PNF) Gloster Gladiator Mk1 Biplane Fighter EPO 1100mm (43"): bit.ly/3N4ppnH
Spare Parts: bit.ly/3tO87nU
The Gloster Gladiator is an unusual and rarely modeled subject. The Durafly version of this iconic biplane is a replica of the Shuttleworth Collections Gloster Gladiator Mk1 "K9785", believed to be the only airworthy example flying in the world today. "K9785" depicts the markings of No. 73 Squadron that operated Gloster Gladiators at RAF Mildenhall in England from 1937 to 1938.
The model is manufactured in strong EPO foam, to the usual high standards you have come to expect from this range of RC airplanes. As with most other Durafly models, it comes "Plug N Fly". This means it is supplied with an easy-to-assemble airframe, powerful pre-installed 3719-770KV brushless motor, Aerostar 40A ESC, and 4 pre-installed 9g digital servos. A vinyl decal sheet is included, these will need to be applied during the building process, this gives you the choice of using the silver finish as a base for creating your own color scheme. Once the model is assembled, all you require is your choice of 4ch or more receiver and a 2200mAh 4S (14.8V) LiPo battery.
The attention to detail is superb from the blistered cowl, scale exhausts, and scale streamlined landing gear with large diameter scale wheels. The ribbed wings, tail, and stringered fuselage depict a fabric-covered airframe, and blistered machine gun housings make this a model you will be proud to own. Scale flying wires are also supplied, the model can be flown with or without them but they do add that realistic scale touch to the Gladiator.
The Gladiator has very benign handling characteristics with an almost non-existent stall, and at half power, it flies very scale-like. At full power it becomes a very agile and aerobatic sports model, big loops, axial rolls, and even knife-edge can be performed, it is great fun to fly. So it is not only for the scale buffs, it will also appeal to the sports pilots as well.
The 1930s was the golden age of aviation, capture these halcyon days with the beautiful Durafly Gloster Gladiator.
Features:
• An easy-to-assemble, beautiful scale model of the ultimate classic biplane
• "Plug N Fly", comes complete with a powerful pre-installed brushless motor, ESC, and digital servos
• Molded-in ultra-smooth, super tough, EPO foam that is finished in silver paint
• Superb attention to detail including ribbed wings and stringered fuselage
• Includes large diameter scale wheels, molded dummy radial engine, scale rigging wires, and other scale detailing parts
• Depicts the color scheme of the only airworthy example flying in the world today
Featured in this video:
Painting Perfect Paint Lines on Foam Planes using Tape Without Peeling off the Original Paint - youtube.com/watch?v=v-x5mRK5FAM
Don't forget to like, share, subscribe, and hit the notification bell for regular HobbyKing videos
Enjoy, stay safe, and let's keep growing the community:
• Sign-up for Email Updates: bit.ly/2YahBd5
• Facebook - facebook.com/HobbyKing
• Twitter - twitter.com/HobbyKingLive
• Instagram - instagram.com/hobbyking
• Branded Merch - bit.ly/3qYtU9n
#durafly #glostergladiator #hobbyking #modtechmonday #modtech #rctutorial #rcaircraft #rcpaint #plugandfly #pnf #flightoverview #warbird #rcplane #rcairplane #rcaeroplane
In this edition of HobbyKing's Mod Tech Monday, Stuart is here to go over steps to repaint the new Durafly (PNF) Gloster Gladiator Mk1 Biplane Fighter into a "Norweigian" paint scheme. Stay tuned for the next parts of this series
The Durafly Gloster Gladiator Painting and Weathering Part 1 Blog Article: bit.ly/3yxZpfd
The Durafly Gloster Gladiator Painting and Weathering Part 2 Blog Article: bit.ly/3VlAczs
The Gloster Gladiator was a British-built biplane fighter, it was used by the Royal Air Force and Fleet Air Arm during the late 1930s. It was the RAF's last, and ultimate biplane fighter airplane to be manufactured, but it was also the first to feature an enclosed cockpit.
Get the Durafly (PNF) Gloster Gladiator Mk1 Biplane Fighter EPO 1100mm (43"): bit.ly/3N4ppnH
Spare Parts: bit.ly/3tO87nU
The Gloster Gladiator is an unusual and rarely modeled subject. The Durafly version of this iconic biplane is a replica of the Shuttleworth Collections Gloster Gladiator Mk1 "K9785", believed to be the only airworthy example flying in the world today. "K9785" depicts the markings of No. 73 Squadron that operated Gloster Gladiators at RAF Mildenhall in England from 1937 to 1938.
The model is manufactured in strong EPO foam, to the usual high standards you have come to expect from this range of RC airplanes. As with most other Durafly models, it comes "Plug N Fly". This means it is supplied with an easy-to-assemble airframe, powerful pre-installed 3719-770KV brushless motor, Aerostar 40A ESC, and 4 pre-installed 9g digital servos. A vinyl decal sheet is included, these will need to be applied during the building process, this gives you the choice of using the silver finish as a base for creating your own color scheme. Once the model is assembled, all you require is your choice of 4ch or more receiver and a 2200mAh 4S (14.8V) LiPo battery.
The attention to detail is superb from the blistered cowl, scale exhausts, and scale streamlined landing gear with large diameter scale wheels. The ribbed wings, tail, and stringered fuselage depict a fabric-covered airframe, and blistered machine gun housings make this a model you will be proud to own. Scale flying wires are also supplied, the model can be flown with or without them but they do add that realistic scale touch to the Gladiator.
The Gladiator has very benign handling characteristics with an almost non-existent stall, and at half power, it flies very scale-like. At full power it becomes a very agile and aerobatic sports model, big loops, axial rolls, and even knife-edge can be performed, it is great fun to fly. So it is not only for the scale buffs, it will also appeal to the sports pilots as well.
The 1930s was the golden age of aviation, capture these halcyon days with the beautiful Durafly Gloster Gladiator.
Features:
• An easy-to-assemble, beautiful scale model of the ultimate classic biplane
• "Plug N Fly", comes complete with a powerful pre-installed brushless motor, ESC, and digital servos
• Molded-in ultra-smooth, super tough, EPO foam that is finished in silver paint
• Superb attention to detail including ribbed wings and stringered fuselage
• Includes large diameter scale wheels, molded dummy radial engine, scale rigging wires, and other scale detailing parts
• Depicts the color scheme of the only airworthy example flying in the world today
Featured in this video:
Painting Perfect Paint Lines on Foam Planes using Tape Without Peeling off the Original Paint - youtube.com/watch?v=v-x5mRK5FAM
Don't forget to like, share, subscribe, and hit the notification bell for regular HobbyKing videos
Enjoy, stay safe, and let's keep growing the community:
• Sign-up for Email Updates: bit.ly/2YahBd5
• Facebook - facebook.com/HobbyKing
• Twitter - twitter.com/HobbyKingLive
• Instagram - instagram.com/hobbyking
• Branded Merch - bit.ly/3qYtU9n
#durafly #glostergladiator #hobbyking #modtechmonday #modtech #rctutorial #rcaircraft #rcpaint #plugandfly #pnf #flightoverview #warbird #rcplane #rcairplane #rcaeroplane
