Uploaded October 2026 | Updated November 2026, 23 hours ago
MinimumRC SG-133 Glider
In this video I will go over the MinimumRC SG-133 powered glider. This is a very complete offering from MinimumRC. The SG-133 requires four steps to assemble. Use two screws to attach the horizontal tail, glue the wing halves together with the included glue, screw on the wing with the four included screws, charge the battery and go fly.
You can build the SG-133 in less than 30 minutes. In short this is a great ready to fly foam glider. This is also a great addition to your micro RC glider fleet.
The SG-133 has a wingspan of just over 32 inches and weights around 2.2 ounces with the 180 mA lipo battery. The SG-133 uses four channels of control with throttle (via ESC), rudder, elevator and ailerons. Each wing has its own aileron servo.
The SG-133 also has gyro stabilization with full stabilization, partial stabilization and manual mode. These modes are easily switched at the Andromeda transmitter.
The built in electric motor with a folding propeller provides plenty of thrust. The large ailerons offer responsive bank control. The SG-133 handles very well in the air and the gyros assist a lot with smooth and fully controllable flight.
MinimumRC.com
Chapters
00:00 - Intro
00:48 - SG-133 project overview
01:33 - Real world powered gliders
02:37 - MinimumRC website
03:12 - SG-133 unbox and assembly
10:07 - Andromeda transmitter
10:33 - Final SG-133 checks
13:17 - Test flight at the RC field
MinimumRC SG-133 Glider
In this video I will go over the MinimumRC SG-133 powered glider. This is a very complete offering from MinimumRC. The SG-133 requires four steps to assemble. Use two screws to attach the horizontal tail, glue the wing halves together with the included glue, screw on the wing with the four included screws, charge the battery and go fly.
You can build the SG-133 in less than 30 minutes. In short this is a great ready to fly foam glider. This is also a great addition to your micro RC glider fleet.
The SG-133 has a wingspan of just over 32 inches and weights around 2.2 ounces with the 180 mA lipo battery. The SG-133 uses four channels of control with throttle (via ESC), rudder, elevator and ailerons. Each wing has its own aileron servo.
The SG-133 also has gyro stabilization with full stabilization, partial stabilization and manual mode. These modes are easily switched at the Andromeda transmitter.
The built in electric motor with a folding propeller provides plenty of thrust. The large ailerons offer responsive bank control. The SG-133 handles very well in the air and the gyros assist a lot with smooth and fully controllable flight.
MinimumRC.com
Chapters
00:00 - Intro
00:48 - SG-133 project overview
01:33 - Real world powered gliders
02:37 - MinimumRC website
03:12 - SG-133 unbox and assembly
10:07 - Andromeda transmitter
10:33 - Final SG-133 checks
13:17 - Test flight at the RC field










