Uploaded July 2023 | Updated September 2026, 2 weeks ago
In this video we take the housing from the M18 12AH pack seen in a previous video and turn it into a 10AH "Power Stack" style Beast. At least we hope it ends up being a beast. This is not for everyday use or compact what-so-ever it is simply for testing since Milwaukee has not come out with the 10AH Power stack yet. I hope to get this to Torque Test Channel to see how well it holds up and compares to many of the other packs on the market. I am still a small channel and I did not buy the best LiPo cells on the market to send off for testing, but I hope we have interesting results and the way I have the BMS connections hopefully TTC can use other packs in the future with the easy to connect style of this pack and use it many more times in future tests. If these results are good just imagine how well the higher end LiPo cells with 100C will be. Hope you find this video interesting. I will include TTC link below if they do in fact post a video testing it. Thanks for watching!
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
5S 5000mAH LiPo Packs used in this Video: amzn.to/3KgatUY
XT90 Leads if needed: amzn.to/47djiZM
JST-XH Connector kit if needed: amzn.to/3OgW1yg
JST-XH Pre-made extensions if needed: amzn.to/3OhMlE1
Electronics Grade Silicone if needed: amzn.to/3O5NNaY
Weller 200W Iron if needed: amzn.to/30nzhT2
LiPo Voltage Monitor/Alarm if needed: amzn.to/3OxLJKy
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
GM328 if needed: amzn.to/30rBFrJ
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
Atlas DCA55 if needed: amzn.to/2RhrcuP
MESR-100 if needed: amzn.to/3MMkkE1
150W Load Tester if needed: amzn.to/30i8sn8
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amtech-nc-559-v2-tf-flux-10ml-syringe-plunger-2-needle-sizes/?ref=thriftytoolshed
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low-melt-solder-pack-of-6-sticks/?ref=thriftytoolshed
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/premium-desolder-braid-wick-10ft-length/?ref=thriftytoolshed
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dual-head-esd-safe-hard-cleaning-brush-for-circuit-boards-and-corrosion-removal/?ref=thriftytoolshed
NF Mechanic Tweezers if needed:
northridgefix.com/product/mechanic-diamond-high-precision-tweezer-non-stick-carbon-coating/?ref=thriftytoolshed
Solder wire 100g 60/40 if needed:
northridgefix.com/product/best-solder-wire-roll-100g-choose-from-0-3mm-and-0-8mm/?ref=thriftytoolshed
NF.Mini Soldering Pen if needed:
northridgefix.com/product/portable-nf-mini-soldering-pen/?ref=thriftytoolshed
NF V2.3 Microscope if needed:
northridgefix.com/product/microscope-camera-bundle-1080-60fps-180x-lens-ring-adapter-2-barlow-lenses-0-5x-0-75x/?ref=thriftytoolshed
NF Board holder with 5 strong magnets if needed:
northridgefix.com/product/northridgefix-pcb-board-holder-with-5-strong-magnets/?ref=thriftytoolshed
NF Universal Board Holder if needed:
northridgefix.com/product/universal-pcb-board-holder-fully-adjustable-jig-fixture/?ref=thriftytoolshed
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hepa-fume-extractor-smoke-absorber-purifier-nf-fume/?ref=thriftytoolshed
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/atten-st-862d-hot-air-station-with-4-nozzles/?ref=thriftytoolshed
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/grinding-pen-for-traces-repair-chip-grind-cut-hole-7-tips-battery-operated/?ref=thriftytoolshed
UNI-T UTI260B Thermal Camera if needed:
northridgefix.com/product/uni-t-uti260b-thermal-imager-camera-256px-x-192px/?ref=thriftytoolshed
In this video we take the housing from the M18 12AH pack seen in a previous video and turn it into a 10AH "Power Stack" style Beast. At least we hope it ends up being a beast. This is not for everyday use or compact what-so-ever it is simply for testing since Milwaukee has not come out with the 10AH Power stack yet. I hope to get this to Torque Test Channel to see how well it holds up and compares to many of the other packs on the market. I am still a small channel and I did not buy the best LiPo cells on the market to send off for testing, but I hope we have interesting results and the way I have the BMS connections hopefully TTC can use other packs in the future with the easy to connect style of this pack and use it many more times in future tests. If these results are good just imagine how well the higher end LiPo cells with 100C will be. Hope you find this video interesting. I will include TTC link below if they do in fact post a video testing it. Thanks for watching!
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
5S 5000mAH LiPo Packs used in this Video: amzn.to/3KgatUY
XT90 Leads if needed: amzn.to/47djiZM
JST-XH Connector kit if needed: amzn.to/3OgW1yg
JST-XH Pre-made extensions if needed: amzn.to/3OhMlE1
Electronics Grade Silicone if needed: amzn.to/3O5NNaY
Weller 200W Iron if needed: amzn.to/30nzhT2
LiPo Voltage Monitor/Alarm if needed: amzn.to/3OxLJKy
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
GM328 if needed: amzn.to/30rBFrJ
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
Atlas DCA55 if needed: amzn.to/2RhrcuP
MESR-100 if needed: amzn.to/3MMkkE1
150W Load Tester if needed: amzn.to/30i8sn8
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amtech-nc-559-v2-tf-flux-10ml-syringe-plunger-2-needle-sizes/?ref=thriftytoolshed
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low-melt-solder-pack-of-6-sticks/?ref=thriftytoolshed
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/premium-desolder-braid-wick-10ft-length/?ref=thriftytoolshed
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dual-head-esd-safe-hard-cleaning-brush-for-circuit-boards-and-corrosion-removal/?ref=thriftytoolshed
NF Mechanic Tweezers if needed:
northridgefix.com/product/mechanic-diamond-high-precision-tweezer-non-stick-carbon-coating/?ref=thriftytoolshed
Solder wire 100g 60/40 if needed:
northridgefix.com/product/best-solder-wire-roll-100g-choose-from-0-3mm-and-0-8mm/?ref=thriftytoolshed
NF.Mini Soldering Pen if needed:
northridgefix.com/product/portable-nf-mini-soldering-pen/?ref=thriftytoolshed
NF V2.3 Microscope if needed:
northridgefix.com/product/microscope-camera-bundle-1080-60fps-180x-lens-ring-adapter-2-barlow-lenses-0-5x-0-75x/?ref=thriftytoolshed
NF Board holder with 5 strong magnets if needed:
northridgefix.com/product/northridgefix-pcb-board-holder-with-5-strong-magnets/?ref=thriftytoolshed
NF Universal Board Holder if needed:
northridgefix.com/product/universal-pcb-board-holder-fully-adjustable-jig-fixture/?ref=thriftytoolshed
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hepa-fume-extractor-smoke-absorber-purifier-nf-fume/?ref=thriftytoolshed
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/atten-st-862d-hot-air-station-with-4-nozzles/?ref=thriftytoolshed
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/grinding-pen-for-traces-repair-chip-grind-cut-hole-7-tips-battery-operated/?ref=thriftytoolshed
UNI-T UTI260B Thermal Camera if needed:
northridgefix.com/product/uni-t-uti260b-thermal-imager-camera-256px-x-192px/?ref=thriftytoolshed
