Gregs Maker Corner | Mellow VZBot 330 Build Series - Part 2 Toolhead, Belts, and Panels @GregsMakerCorner | Uploaded August 2023 | Updated October 2024, 14 hours ago.
This video picks up from Part 1, and covers assembling and installing the toolhead, belts, and panels for the Mellow VzBot 330 kit. The VzBot is a very high end printer that is designed for raw performance and speed.
This section of the build is pretty straight forward. Unfortunately I did run into some issues where I needed to drill holes in my panels. This wasn't really a big deal and is somewhat to be expected. I believe they have already addressed the hole size issue for the power supplies for future kits.
The VzBot 330 kit was sponsored by Provok3d, one of the few US distributors of the Mellow VzBot 330 kit. I definitely recommend this kit, please consider buying one here. If you purchase, please mention Greg's Maker Corner sent you!
provok3d.com/product/mellow-vz330-awd/?v=0a10a0b3e53b
Before you dive in, check out my Initial Impressions video here:
youtube.com/watch?v=iyb3eGiHOu4
Resources for building:
Main website for documentation
docs.vzbot.org
Cad Drawing
myhub.autodesk360.com/ue2b28c05/g/shares/SH9285eQTcf875d3c539c632833401a9734e
My github repository contains useful information as well as a deep dive for all the components you will likely need, configuration info, as well as some remixes for parts. I also have a link to my detailed build log and VzBot discord.
github.com/techyg/VzBot
This video picks up from Part 1, and covers assembling and installing the toolhead, belts, and panels for the Mellow VzBot 330 kit. The VzBot is a very high end printer that is designed for raw performance and speed.
This section of the build is pretty straight forward. Unfortunately I did run into some issues where I needed to drill holes in my panels. This wasn't really a big deal and is somewhat to be expected. I believe they have already addressed the hole size issue for the power supplies for future kits.
The VzBot 330 kit was sponsored by Provok3d, one of the few US distributors of the Mellow VzBot 330 kit. I definitely recommend this kit, please consider buying one here. If you purchase, please mention Greg's Maker Corner sent you!
provok3d.com/product/mellow-vz330-awd/?v=0a10a0b3e53b
Before you dive in, check out my Initial Impressions video here:
youtube.com/watch?v=iyb3eGiHOu4
Resources for building:
Main website for documentation
docs.vzbot.org
Cad Drawing
myhub.autodesk360.com/ue2b28c05/g/shares/SH9285eQTcf875d3c539c632833401a9734e
My github repository contains useful information as well as a deep dive for all the components you will likely need, configuration info, as well as some remixes for parts. I also have a link to my detailed build log and VzBot discord.
github.com/techyg/VzBot
