Gregs Maker Corner | Unboxing the Siboor V02 - A full Voron 0.2 kit including parts. @GregsMakerCorner | Uploaded March 2023 | Updated October 2024, 1 hour ago.
***UPDATE - 4/11/23 - THE REVIEW VIDEO IS UP! THE BUILD WENT TOGETHER QUITE WELL, RECOMMENDED FOR BUDGET BUILDERS.
***UPDATE - 4/5/23- THE REPLACEMENT RAILS ARRIVED AND LOOK FANTASTIC AND I SWAPPED OUT ON MY BUILD. STAY TUNED FOR FULL REVIEW VIDEO- COMING SOON!
****UPDATE - 3/23/23 **** ATTENTION! I DID FIND RUST ON MY RAILS AND HAVE PROVIDED FEEDBACK TO SIBOOR. WITHIN THE SAME DAY THEY RESPONDED IN THE COMMENTS (OF THIS VIDEO) AS WELL AS DIRECTLY TO ME, AND SAID THEY WILL BE ADDRESSING THIS FOR FUTURE KITS, AND IF ANY CUSTOMER HAS RUST ON RAILS PLEASE CONTACT THEM WITH A PICTURE AND THEY WILL REPLACE THEM. THANK YOU FOR WATCHING AND READING THIS NOTICE!**
If you are a budget minded Voron 0.2 builder, this video may be for you! This kit retails for $469, and includes everything you need- rails, extrusions, parts, motors, mcu/controller, bearings, fasteners, hot end, and even 3d printed parts! At the time of this video, it is unusual for kits to be complete.
Get yours here directly from SIBOOR site:
bit.ly/v02kit
Alternatively, find it on Ali Express. Make sure you pick the v02 kit (not the v01).
aliexpress.us/item/3256804231037154.html?spm=a2g0o.store_pc_saleItems.8148356.42.20e21267no5Gl0&pdp_npi=2%40dis%21USD%21US%20%24826.30%21US%20%24383.86%21%21%21%21%21%4021038edf16790696075271258ef250%2112000032577581231%21sh&gatewayAdapt=glo2usa&_randl_shipto=US
Alibaba Link:
alibaba.com/product-detail/Siboor-Portable-Printer-Machine-House-Diy_1600767260198.html?spm=a2747.manage.0.0.728d71d27iYJPM
Is this kit any good? I am cautiously optimistic. Based on the unboxing, you will have to decide! I will be showing the build and putting it through the paces in a future video. My goal is to help raise awareness for this brand and kit, which I think (if all goes well) could be a great new option for getting into a budget Voron 0.2 build.
This kit does stray a bit from being a 100% "stock" build, according to the Voron 0.2 manual, but it is VERY close. The most significant place it is different as far as I can tell, is the control board. The stock Voron 0.2 recommends a Raspberry Pi + a SKR Pico. This includes an alternative board that performs both the compute and the mcu function, all in one, by using the Mellow Fly Gemini v3. I have never tried this board before but I have heard positive things about it. I am looking forward to trying it out and will definitely provide feedback in future videos.
Thanks for watching!
***UPDATE - 4/11/23 - THE REVIEW VIDEO IS UP! THE BUILD WENT TOGETHER QUITE WELL, RECOMMENDED FOR BUDGET BUILDERS.
***UPDATE - 4/5/23- THE REPLACEMENT RAILS ARRIVED AND LOOK FANTASTIC AND I SWAPPED OUT ON MY BUILD. STAY TUNED FOR FULL REVIEW VIDEO- COMING SOON!
****UPDATE - 3/23/23 **** ATTENTION! I DID FIND RUST ON MY RAILS AND HAVE PROVIDED FEEDBACK TO SIBOOR. WITHIN THE SAME DAY THEY RESPONDED IN THE COMMENTS (OF THIS VIDEO) AS WELL AS DIRECTLY TO ME, AND SAID THEY WILL BE ADDRESSING THIS FOR FUTURE KITS, AND IF ANY CUSTOMER HAS RUST ON RAILS PLEASE CONTACT THEM WITH A PICTURE AND THEY WILL REPLACE THEM. THANK YOU FOR WATCHING AND READING THIS NOTICE!**
If you are a budget minded Voron 0.2 builder, this video may be for you! This kit retails for $469, and includes everything you need- rails, extrusions, parts, motors, mcu/controller, bearings, fasteners, hot end, and even 3d printed parts! At the time of this video, it is unusual for kits to be complete.
Get yours here directly from SIBOOR site:
bit.ly/v02kit
Alternatively, find it on Ali Express. Make sure you pick the v02 kit (not the v01).
aliexpress.us/item/3256804231037154.html?spm=a2g0o.store_pc_saleItems.8148356.42.20e21267no5Gl0&pdp_npi=2%40dis%21USD%21US%20%24826.30%21US%20%24383.86%21%21%21%21%21%4021038edf16790696075271258ef250%2112000032577581231%21sh&gatewayAdapt=glo2usa&_randl_shipto=US
Alibaba Link:
alibaba.com/product-detail/Siboor-Portable-Printer-Machine-House-Diy_1600767260198.html?spm=a2747.manage.0.0.728d71d27iYJPM
Is this kit any good? I am cautiously optimistic. Based on the unboxing, you will have to decide! I will be showing the build and putting it through the paces in a future video. My goal is to help raise awareness for this brand and kit, which I think (if all goes well) could be a great new option for getting into a budget Voron 0.2 build.
This kit does stray a bit from being a 100% "stock" build, according to the Voron 0.2 manual, but it is VERY close. The most significant place it is different as far as I can tell, is the control board. The stock Voron 0.2 recommends a Raspberry Pi + a SKR Pico. This includes an alternative board that performs both the compute and the mcu function, all in one, by using the Mellow Fly Gemini v3. I have never tried this board before but I have heard positive things about it. I am looking forward to trying it out and will definitely provide feedback in future videos.
Thanks for watching!
