Rob Shuster / SideWinder Drums | Making Wavy Staves on the CNC @sidewinderdrums | Uploaded 1 year ago | Updated 4 minutes ago
I went deep down the rabbit hole to make wavy staves using vcarve and a spreadsheet to edit the gcode for a CNC.
This will eventually be used to make drums, but can be used for many other projects.
To get the spreadsheet from this video, right click and copy the file in this link to add it to your google drive. If you choose to use this to create gcode for your machine, test it thoroughly before you trust it. Use at your own risk.
drive.google.com/drive/folders/1Bv5858gCy3-UjdDXapiDCCMTayh2JU0l?usp=share_link
I went deep down the rabbit hole to make wavy staves using vcarve and a spreadsheet to edit the gcode for a CNC.
This will eventually be used to make drums, but can be used for many other projects.
To get the spreadsheet from this video, right click and copy the file in this link to add it to your google drive. If you choose to use this to create gcode for your machine, test it thoroughly before you trust it. Use at your own risk.
drive.google.com/drive/folders/1Bv5858gCy3-UjdDXapiDCCMTayh2JU0l?usp=share_link
