Uploaded April 2024 | Updated September 2026, 2 hours ago
You can easily create your own DIY silicone mold using my 3D printed STL files on my Website
stl tealight candle making holder. silicone mold for concrete tealight 30 ML
This is the easiest way to start your silicone molds!
I Made a design of the most practical and simple mold for creating Tea-light candles — it requires a minimum of silicone (190 ml/6.5 oz) and only 35 grams of PLA to print the formwork!
My designs are not only modeled but also tested in real life — I am experimenting with the optimal sizes and shapes for printing and pouring.
! You need to use a non-silicone release spray like "Ease Release 200" for easy first demolding — otherwise, you'll have to break the frame to get the mold out.
The formwork have sockets on the bottom of the mold, all you will need to do is mount master model in the sockets with double-sided tape or weak glue and then press out the silicone mold through the holes at the bottom
#shorts #diy #short #craft #handmade
LaO2 Laboratory | Product Design & Handcraft. 3D-printable STL for Mold Making on my Website
You can easily create your own DIY silicone mold using my 3D printed STL files on my Website
stl tealight candle making holder. silicone mold for concrete tealight 30 ML
This is the easiest way to start your silicone molds!
I Made a design of the most practical and simple mold for creating Tea-light candles — it requires a minimum of silicone (190 ml/6.5 oz) and only 35 grams of PLA to print the formwork!
My designs are not only modeled but also tested in real life — I am experimenting with the optimal sizes and shapes for printing and pouring.
! You need to use a non-silicone release spray like "Ease Release 200" for easy first demolding — otherwise, you'll have to break the frame to get the mold out.
The formwork have sockets on the bottom of the mold, all you will need to do is mount master model in the sockets with double-sided tape or weak glue and then press out the silicone mold through the holes at the bottom
#shorts #diy #short #craft #handmade
LaO2 Laboratory | Product Design & Handcraft. 3D-printable STL for Mold Making on my Website
