Uploaded October 2024 | Updated September 2026, 2 hours ago
3D Print Your Own Custom Studio Light — STL DIY Softbox
Build a Custom Photography Softbox Using 3D Printing
Don't worry about melting! — yes, the LED bulb gets very hot, but it is not in contact with the shell and bulb temperature is not enough to melt it — my 3D-printed softbox has been tested in action for several days and works flawlessly!
Available in 4 sizes — 150/170/200/240 mm
Softbox and mount must be printed from PETG
Has replaceable light diffusers with sheet thickness 01/02/04 mm
Diffuser can be printed from PLA
Can be used with RGB LED bulbs
Uses a standard E27/26 socket with thread. Product links is included in the archive
The mount has a 3D printed 3/8 inch thread for a tripod and can be used with a 1/4 inch adapter
One M6 nut and M6x70mm bolt is required to assemble the mount
No glue is required for assembly
diy, how to, 3d, 3d printing, how to make
3D Print Your Own Custom Studio Light — STL DIY Softbox
Build a Custom Photography Softbox Using 3D Printing
Don't worry about melting! — yes, the LED bulb gets very hot, but it is not in contact with the shell and bulb temperature is not enough to melt it — my 3D-printed softbox has been tested in action for several days and works flawlessly!
Available in 4 sizes — 150/170/200/240 mm
Softbox and mount must be printed from PETG
Has replaceable light diffusers with sheet thickness 01/02/04 mm
Diffuser can be printed from PLA
Can be used with RGB LED bulbs
Uses a standard E27/26 socket with thread. Product links is included in the archive
The mount has a 3D printed 3/8 inch thread for a tripod and can be used with a 1/4 inch adapter
One M6 nut and M6x70mm bolt is required to assemble the mount
No glue is required for assembly
diy, how to, 3d, 3d printing, how to make
